Studies of Protein Binding to Biomimetic Membranes Using a Group of Uniform Materials Based on Organic Salts Derived From 8-Anilino-1-naphthalenesulfonic Acid.

Tuning the 8-anilino-1-naphthalenesulfonic acid (ANS) structure usually requires harsh conditions and long reaction times, which can result in low yields. Herein, ANS was modified to form an ANS group of uniform materials based on organic salts (GUMBOS), prepared with simple metathesis reactions and distinct cations, namely tetrabutylammonium (N4444), tetrahexylammonium (N6666), and tetrabutylphosphonium (P4444). These ANS-based GUMBOS were investigated as fluorescent probes for membrane binding studies with four proteins having distinct physicochemical properties. Liposomes of 1,2-dimyristoyl-sn-glycero-3-phosphocholine were employed as membrane models as a result of their ability to mimic the structure and chemical composition of cell membranes. Changes in fluorescence intensity were used to monitor protein binding to liposomes, and adsorption data were fitted to a Freundlich-like isotherm. It was determined that [N4444][ANS] and [P4444][ANS] GUMBOS have enhanced optical properties and lipophilicity as compared to parent ANS. As a result, these two GUMBOS were selected for subsequent protein-membrane binding studies. Both [N4444][ANS] and [P4444][ANS] GUMBOS and parent ANS independently reached membrane saturation within the same concentration range. Furthermore, distinct fluorescence responses were observed upon the addition of proteins to each probe, which demonstrates the impact of properties such as lipophilicity on the binding process. The relative maintenance of binding cooperativity and maximum fluorescence intensity suggests that proteins compete with ANS-based probes for the same membrane binding sites. Finally, this GUMBOS-based approach is simple, rapid, and involves relatively small amounts of reagents, making it attractive for high-throughput purposes. These results presented herein can also provide relevant information for designing GUMBOS with ameliorated properties.

Influence of humidity on accuracy of QCM - IR780-based GUMBOS sensor arrays.

Herein, hydrophobic coating materials are reported for QCM detection of VOCs under dry and humid conditions. In this study, IR780-based GUMBOS ([IR780][OTf] and [IR780][NTf2]) were synthesized using an ion exchange reaction and the anions trifluoromethanesulfonimide ([OTf]) and bisperfluoromethanesulfonimide ([NTf2]). The parent iodide salts and GUMBOS ([IR780][I]), [IR780][OTf], and [IR780][NTf2]) were characterized using several analytical techniques. These salts were then employed as sensor coatings on quartz crystal resonators using an electrospray coating method. These sensors were exposed to four flow ratios of five common VOCs in the absence and presence of 10 vol% water. Fundamental frequency responses were recorded and further employed as input variables to develop highly accurate multi-sensor arrays (MSAs). Accuracy was better than 78.3% without water, and better than 91.7% in the presence of water. When multi-harmonic responses were evaluated as input variables to assess discrimination ability for each sensor, highly accurate virtual sensor arrays (VSAs) were developed using each GUMBOS coating. In the case of [IR780][NTf2], a slight improvement in discrimination was achieved in the presence of water (95%) versus the absence of water. Moreover, this study highlights development of readily synthesized hydrophobic coatings of IR780-based GUMBOS for potential detection and discrimination of VOCs in aqueous systems.

Solvent-assisted dispersive micro-solid phase extraction of bisphenols using iron(III) thenoyltrifluoroacetonate complex (Fe(TTA)3) as a new nanostructured sorbent: a proof of concept.

In this work, we describe for the first time the use of iron(III) thenoyltrifluoroacetonate complex (Fe(TTA)3) as a novel sorbent for solvent-assisted dispersive micro-solid phase extraction (SA-dµSPE) of bisphenols from water samples. The extraction procedure is based on the formation of nanoparticles in situ following the rapid injection of a methanolic solution of Fe(TTA)3 into the stirred aqueous sample. Herein, the synthesis of Fe(TTA)3 and study of the essential parameters of the preparative procedure are described. The optimized procedure allowed for efficient enrichment of bisphenols from various water samples, chosen as model contaminants and matrix, within 2.5 min. The sorbent was collected by centrifugation, dissolved in methanol, and injected to perform HPLC with spectrophotometric detection. The limits of detection and quantification obtained ranged from 1.0-3.1 and 3.1-7.5 µg L-1, respectively. Intraday and interday precisions of <7% relative standard deviation (RSD) and <8% RSD with analyte recoveries ranging between 70-117% (103.8% on average) were obtained for the analysis of river water, wastewater treatment plant effluent, and bottled water.

Fluorescent Ionic Probe for Determination of Mechanical Properties of Healed Poly(ethylene-co-methacrylic acid) Ionomer Films.

In recent years, advanced materials with properties resembling biological systems, particularly artificial muscles, have received intense scrutiny. This is because the interesting conformational shape characteristics of such materials have benefited a variety of technologies, including textiles, 3D printing, and medical devices. Although a multitude of shape memory properties have been studied and developed in recent years, self-healing of these polymers after puncture or rupture has also become a major area of study. Most techniques for detection of such processes are mechanically based and require considerable hands-on monitoring. Thus, a rapid visual detection method for self-healing is highly desirable. Herein, we describe fluorescence studies for rapid detection of self-healing properties of a partially neutralized sodium ionomer poly(ethylene-co-methacrylic acid) (PEMA). In this study, two different fluorophores, parent non-ionic 4,6-dipyrenylpyrimidine and ionic 4,6-dipyrenylpyrimidinium iodide fluorophores, were evaluated as possible sensors of self-healing. Incorporation of these probes via solution blending and compatibility into a PEMA of these fluorophores were evaluated. Thermal characterizations using differential scanning calorimetry were also performed to elucidate physical characteristics of healed sites. Ratiometric fluorescence emission variations were explored within puncture-healed ionomer films and related to Young's modulus properties with good linearity, indicating potential utility of this approach for monitoring elastic modulus properties after healing has occurred. Further statistical analyses of mechanical processes using quadratic discriminant analysis resulted in development of several highly accurate predictive models for determining time since damage healing.

Protein discrimination using erythrosin B-based GUMBOS in combination with UV-Vis spectroscopy and chemometrics.

GUMBOS (Group of Uniform Materials Based on Organic Salts) have recently emerged as interesting materials for protein analysis due to their unique features and high tunability. In this regard, four novel erythrosin B (EB)-based GUMBOS were synthesized and their potential to discriminate among proteins with distinct properties (e.g., size, charge, and hydrophobicity) was assessed. These solid-phase materials were prepared using a single-step metathesis reaction between EB and various phosphonium and ammonium cations, namely tetrabutylphosphonium (P4444+), tributylhexadecylphosphonium (P44416+), tetrabutylammonium (N4444+), and benzyldimethylhexadecylammonium (BDHA+). Subsequently, the effect of pH (3.0, 4.5, and 6.0) and reaction time (5, 10, and 15 min) on the discriminatory power of synthesized GUMBOS was evaluated. Absorption spectra resulting from the interaction between EB-based GUMBOS and proteins were analyzed using partial least squares discriminant analysis (PLSDA). Unlike time, the pH value was determined to have influence over GUMBOS discrimination potential. Correct protein assignments varied from 86.5% to 100.0%, and the best discriminatory results were observed for [P4444]2[EB] and [N4444]2[EB] at pH 6.0. Additionally, these two GUMBOS allowed discrimination of protein mixtures containing different ratios of albumin and myoglobin, which appeared as individualized clusters in the PLSDA scores plots. Overall, this study showcases EB-based GUMBOS as simple synthetic targets to provide a label-free, cost-effective, rapid, and successful approach for discrimination of single proteins and their mixtures.

Recycling Thermoset Epoxy Resin Using Alkyl-Methyl-Imidazolium Ionic Liquids as Green Solvents.

Herein, a solvent-based green recycling procedure is reported for recycling thermoset epoxy resins (TERs) and carbon fiber reinforced epoxy composites (CFRECs) employing ionic liquids (ILs) and alcohols under mild conditions. With melting points less than 100 °C, ILs are defined as organic salts, typically composed of bulky cations with organic or inorganic counteranions. As a result of their unique physical properties such as low vapor pressure, relatively high thermal stability, and multifunctional tunability, these solvents are often classified as "green solvents" as compared to traditional organic solvents. In this study, swelling and dissolution of TER are evaluated in the presence of pure alkyl-methyl-imidazolium ILs, alcohols, and various mixtures of these co-solvents to determine their swelling and depolymerization capacity at mild temperatures in the absence of catalysts. In these studies, three ILs with different alkyl lengths were evaluated: 1-butyl-3-methyl imidazolium chloride ([BMIm][Cl]), 1-hexyl-3-methyl imidazolium bromide ([HMIm][Br]), and 1-octyl-3-methyl imidazolium bromide ([OMIm][Br]) along with two alcohols: ethylene glycol (EG) and glycerol (Gly). The highest swelling capacity of TER at 150 °C was achieved by a combination of [BMIm][Cl] and EG. In addition, swelling and dissolution of TER were evaluated in the presence of several anion variants of 1-butyl-3-methyl-imidazolium ILs with EG. Complete dissolution of both TERs and CFRECs was achieved in 150 min (2.5 h) at 150 °C under atmospheric pressure. Finally, recovery and reuse of the recycled monomer after dissolution were examined. Recovered epoxy monomers employed to synthesize a recycled TER exhibited similar mechanical properties to the parent TER. In addition, it was demonstrated that carbon fibers could be successfully recovered from CFREC using the recycling method detailed in this manuscript.

QCM Sensor Arrays, Electroanalytical Techniques and NIR Spectroscopy Coupled to Multivariate Analysis for Quality Assessment of Food Products, Raw Materials, Ingredients and Foodborne Pathogen Detection: Challenges and Breakthroughs.

Quality checks, assessments, and the assurance of food products, raw materials, and food ingredients is critically important to ensure the safeguard of foods of high quality for safety and public health. Nevertheless, quality checks, assessments, and the assurance of food products along distribution and supply chains is impacted by various challenges. For instance, the development of portable, sensitive, low-cost, and robust instrumentation that is capable of real-time, accurate, and sensitive analysis, quality checks, assessments, and the assurance of food products in the field and/or in the production line in a food manufacturing industry is a major technological and analytical challenge. Other significant challenges include analytical method development, method validation strategies, and the non-availability of reference materials and/or standards for emerging food contaminants. The simplicity, portability, non-invasive, non-destructive properties, and low-cost of NIR spectrometers, make them appealing and desirable instruments of choice for rapid quality checks, assessments and assurances of food products, raw materials, and ingredients. This review article surveys literature and examines current challenges and breakthroughs in quality checks and the assessment of a variety of food products, raw materials, and ingredients. Specifically, recent technological innovations and notable advances in quartz crystal microbalances (QCM), electroanalytical techniques, and near infrared (NIR) spectroscopic instrument development in the quality assessment of selected food products, and the analysis of food raw materials and ingredients for foodborne pathogen detection between January 2019 and July 2020 are highlighted. In addition, chemometric approaches and multivariate analyses of spectral data for NIR instrumental calibration and sample analyses for quality assessments and assurances of selected food products and electrochemical methods for foodborne pathogen detection are discussed. Moreover, this review provides insight into the future trajectory of innovative technological developments in QCM, electroanalytical techniques, NIR spectroscopy, and multivariate analyses relating to general applications for the quality assessment of food products.

Protein Discrimination Using a Fluorescence-Based Sensor Array of Thiacarbocyanine-GUMBOS.

Sensitive and selective detection of proteins from complex samples has gained substantial interest within the scientific community. Early and precise detection of key proteins plays an important role in potential clinical diagnosis, treatment of different diseases, and proteomic research. In the study reported here, six different compounds belonging to a group of uniform materials based on organic salts (GUMBOS) have been synthesized using three thiacarbocyanine (TC) dyes and employed as fluorescent sensors. Fluorescence properties of micro- and nanoaggregates of these TC-based GUMBOS formed in phosphate buffer solutions are studied in the absence and presence of seven proteins. Fluorescence response patterns of these TC-based GUMBOS were analyzed by linear discriminant analysis (LDA). The constructed LDA model allowed discrimination of these seven proteins at various concentrations with 100% accuracy. The sensing and discrimination abilities of these TC-based GUMBOS were further evaluated in mixtures of two major proteins, i.e., human serum albumin and hemoglobin. Fluorescence response patterns of these mixtures were analyzed by LDA. This model allowed discrimination of various mixtures with 100% accuracy. Moreover, spiked urine samples were prepared and the responses of these sensors were collected and analyzed by LDA. Remarkably, discrimination of these seven proteins was also achieved with 100% accuracy.

Hyaluronic Acid-Cellulose Composites as Patches for Minimizing Bacterial Infections.

A facile method was used to synthesize biocomposites containing differing ratios of hyaluronic acid (HA) and cellulose (CEL). Based on the properties of the individual polymers, the resultant composite materials may have potentially great wound care properties. In the method outlined here, 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]), a simple ionic liquid, was used as the sole solvent without chemical modifiers to dissolve the biopolymers at ratios of 1:1 and 2:1 HA to CEL. This method was completely recyclable since the ionic liquid, [Bmim][Cl], can be recovered. Results from spectroscopic measurements [Fourier transform infrared (FT-IR) and X-ray diffraction (XRD)] confirm the interaction between HA and CEL. Scanning electron microscopy (SEM) images reflect differing biopolymer ratios and the resulting impact on the texture and porosity of these composite materials. The composites exhibited high swelling capacity in various media. These composites were also drug-loaded to examine drug release properties for greater potential in combating Staphylococcus aureus infections.

Carbazole Annulation via Cascade Nucleophilic Addition-Cyclization Involving 2-(Silyloxy)pentadienyl Cation.

We report a new strategy toward the synthesis of highly functionalized carbazoles via 2-(silyloxy)pentadienyl cation intermediates, which were generated upon ionization of vinyl-substituted α-hydroxy silyl enol ethers under Brønsted acid catalysis. These electrophilic species were found to readily undergo cascade reactions with substituted indoles to generate carbazole molecular scaffolds in good yields via a sequence of regioselective nucleophilic addition, followed by intramolecular dehydrative cyclization.

Functionalization of Silyldienol Ethers at the γ-Position via 2-Silyloxypentadienyl Cations.

This report describes Brønsted acid catalyzed de novo synthesis of silyldienol ethers bearing tetrasubstituted double bonds via an intermediacy of 2-silyloxypentadienyl cations. The reactivity of these novel cationic intermediates could be modulated and harnessed toward direct nucleophilic additions regioselectively at the γ-position to produce highly functionalized silyldienol ethers with tunable control of the resulting double bond geometry.

Apolar distal pocket mutants of yeast cytochrome c peroxidase: Binding of imidazole, 1-methylimidazole and 4-nitroimidazole to the triAla, triVal, and triLeu variants.

Imidazole binding to three apolar distal heme pocket mutants of yeast cytochrome c peroxidase (CcP) has been investigated between pH4 and 8. The three CcP variants have Arg-48, Trp-51, and His-52 mutated to either all alanine, CcP(triAla), all valine, CcP(triVal), or all leucine residues, CcP(triLeu). The imidazole binding curves for all three mutants are biphasic indicating that each of the mutants exists in at least two conformational states with different affinities for imidazole. At pH7, the high-affinity conformations of the three CcP mutants bind imidazole between 3.8 and 4.7 orders of magnitude stronger than that of wild-type CcP while the low-affinity conformations have binding affinities about 2.5 orders of magnitude larger than wild-type CcP. Imidazole binding to the three CcP mutants is pH dependent with the strongest binding observed at high pH. Apparent pK(a) values for the transition in binding vary between 5.6 and 7.5 for the high-affinity conformations and between 6.2 and 6.8 for the low-affinity conformations of the CcP triple mutants. The kinetics of imidazole binding are also biphasic. The fast phase of imidazole binding to CcP(triAla) and CcP(triLeu) is linearly dependent on the imidazole concentration while the slow phase is independent of imidazole concentration. Both phases of imidazole binding to CcP(triVal) have a hyperbolic dependence on the imidazole concentration. The apparent association rate constants vary between 30 and 170 M(-1)s(-1) while the apparent dissociation rate constants vary between 0.05 and 0.43 s(-1). The CcP triple mutants have higher binding affinities for 1-methylimidazole and 4-nitroimidazole than does wild-type CcP.

Brønsted acid catalyzed α'-functionalization of silylenol ethers with indoles.

A new method which enables carbon-carbon bond formation at the α'-position of silylenol ethers by using catalytic amounts of pyridinium triflate is reported. This chemistry successfully produces, structurally challenging, highly substituted indole-containing silylenol ethers in excellent yields with complete regiocontrol, presumably through silyloxyallyl cation intermediates. Despite the use of Brønsted acid, the silylenol ether moiety does not undergo protodesilylation, thus underscoring the very mild reaction conditions.

Cooperative benzylic-oxyallylic stabilized cations: regioselective construction of α-quaternary centers in ketone-derived compounds.

We describe a novel reactivity of benzylic-stabilized oxyallyl cations towards regioselective construction of carbon quaternary centers. These synthetically useful intermediates were readily generated upon ionization of aryl substituted α-hydroxy methylenol ethers with catalytic, mild Brønsted acid. The emerging unsymmetrical oxyallyl cations were then directly captured by indoles and other nucleophiles with exquisite control of regioselectivity, predictably at the electrophilic carbon bearing the alkyl substituent to produce highly functionalized, value-added enol ethers.

Peroxygenase activity of cytochrome c peroxidase and three apolar distal heme pocket mutants: hydroxylation of 1-methoxynaphthalene.

BACKGROUND: The cytochrome P450s are monooxygenases that insert oxygen functionalities into a wide variety of organic substrates with high selectivity. There is interest in developing efficient catalysts based on the "peroxide shunt" pathway in the cytochrome P450s, which uses H2O2 in place of O2/NADPH as the oxygenation agent. We report on our initial studies using cytochrome c peroxidase (CcP) as a platform to develop specific "peroxygenation" catalysts. RESULTS: The peroxygenase activity of CcP was investigated using 1-methoxynaphthalene as substrate. 1-Methoxynaphthalene hydroxylation was monitored using Russig's blue formation at standard reaction conditions of 0.50 mM 1-methoxynaphthalene, 1.00 mM H2O2, pH 7.0, 25°C. Wild-type CcP catalyzes the hydroxylation of 1-methoxynaphthalene with a turnover number of 0.0044 ± 0.0001 min-1. Three apolar distal heme pocket mutants of CcP were designed to enhance binding of 1-methoxynaphthalene near the heme, constructed, and tested for hydroxylation activity. The highest activity was observed for CcP(triAla), a triple mutant with Arg48, Trp51, and His52 simultaneously mutated to alanine residues. The turnover number of CcP(triAla) is 0.150 ± 0.008 min-1, 34-fold greater than wild-type CcP and comparable to the naphthalene hydroxylation activity of rat liver microsomal cytochrome P450. While wild-type CcP is very stable to oxidative degradation by excess hydrogen peroxide, CcP(triAla) is inactivated within four cycles of the peroxygenase reaction. CONCLUSIONS: Protein engineering of CcP can increase the rate of peroxygenation of apolar substrates but the initial constructs are more susceptible to oxidative degradation than wild-type enzyme. Further developments will require constructs with increased rates and selectivity while maintaining the stability of wild-type CcP toward oxidative degradation by hydrogen peroxide.

Triphosgene-amine base promoted chlorination of unactivated aliphatic alcohols.

Unactivated α-branched primary and secondary aliphatic alcohols have been successfully transformed into their corresponding alkyl chlorides in high yields upon treatment with a mixture of triphosgene and pyridine in dichloromethane at reflux. These mild chlorination conditions are high yielding, stereospecific, and well tolerated by numerous sensitive functionalities. Furthermore, no nuisance waste products are generated in the course of the reactions.

Chlorination of aliphatic primary alcohols via triphosgene-triethylamine activation.

Activation of primary aliphatic alcohols with triphosgene and triethylamine mixtures afforded either alkyl chloride or diethylcarbamate products, and the switch in selectivity appeared to be driven by sterics. The reaction conditions to achieve this highly useful transformation were unexceptionally mild and readily tolerated by a wide range of sensitive functionalities.