ABSTRACT
An advanced stopped-in-loop flow analysis (SILFA) is proposed for the catalytic determinations of vanadium and iron. The chemistry relies on a vanadium- or iron-catalyzed oxidative reaction of p-anisidine by bromate or hydrogen peroxide in the presence of an activator (Tiron or 1,10-phenanthlorine) to form a red dye (510 nm). Reagents for the vanadium- or iron-catalyzed reaction are well mixed by a reagents-merging zones technique. A sample solution is loaded together with well-mixed reagents into a loop in the SILFA configuration, followed by spectrophotometric detection. The advanced SILFA system provides a selective method for the trace determination of vanadium and iron.
ABSTRACT
An automated stopped-in-loop flow analysis (SILFA) system is proposed for the successive catalytic determination of vanadium and iron. The determination of vanadium was based on the p-anisidine oxidation by potassium bromate in the presence of Tiron as an activator to form a reddish dye, which has an absorption maximum at 510 nm. The selectivity of the vanadium determination was greatly improved by adding diphosphate as a masking agent of iron. For the iron determination, an iron-catalyzed oxidative reaction of p-anisidine by hydrogen peroxide with 1,10-phenanthroline as an activator to produce a reddish dye (510 nm) was employed. The SILFA system consisted of two peristaltic pumps, two six-port injection valves, a four-port selection valve, a heater device, a spectrophotometric detector and a data acquisition device. One six-port injection valve was used for the isolation of a mixed solution of standard/sample and reagent to promote each catalytic reaction, and another six-port injection valve was used for switching the reagent for vanadium or iron to achieve selective determination of each analyte. The above mentioned four-port selection valve was used to select standard solutions or sample. These three valves and the two peristaltic pumps were controlled by a built-in programmable logic controller in a touchscreen controller. The obtained results showed that the proposed SILFA monitoring system constituted an effective approach for the selective determination of vanadium and iron. The limits of detection, 0.052 and 0.55 µg L(-1), were obtained for vanadium and iron, respectively. The proposed system was successfully applied to drinking water samples without any preconcentration procedures.
Subject(s)
Drinking Water/chemistry , Iron/analysis , Spectrophotometry/methods , Vanadium/analysis , Aniline Compounds/chemistry , Catalysis , Diphosphates/chemistry , Hydrogen Peroxide/chemistry , Hydrogen-Ion Concentration , Iron/chemistry , Kinetics , Oxidants/chemistry , Oxidation-Reduction , Spectrophotometry/instrumentation , Temperature , Vanadium/chemistryABSTRACT
A fully automated sequential injection column preconcentration method for the on-line determination of trace vanadium, cadmium and lead in urine samples was successfully developed, utilizing electrothermal atomic absorption spectrometry (ETAAS). Polyamino-polycarboxylic acid chelating resin (Nobias chelate PA-1) packed into a handmade minicolumn was used as a sorbent material. Effective on-line retention of chelate complexes of analytes was achieved at pH 6.0, while the highest elution effectiveness was observed with 1.0 mol L(-1) HNO3 in the reverse phase. Several analytical parameters, like the sample acidity, concentration and volume of the eluent as well as the loading/elution flow rates, have been studied, regarding the efficiency of the method, providing appropriate conditions for the analysis of real samples. For a 4.5 mL sample volume, the sampling frequency was 27 h(-1). The detection limits were found to be 3.0, 0.06 and 2.0 ng L(-1) for V(V), Cd(II) and Pb(II), respectively, with the relative standard deviations ranging between 1.9 - 3.7%. The accuracy of the proposed method was evaluated by analyzing a certified reference material (Seronorm(TM) trace elements urine) and spiked urine samples.
