Detection of SARS-CoV-2 Spike Protein Using Micropatterned 3D Poly(3,4-Ethylenedioxythiophene) Nanorods Decorated with Gold Nanoparticles.

The sensitivity and fabrication process of the detection platform are important for developing viral disease diagnosis. Recently, the outbreak of SARS-CoV-2 compelled us to develop a new detection platform to control such diseases in the future. We present an electrochemical-based assay that employs the unique properties of gold nanoparticles (AuNPs) deposited on 3D carboxyl-functionalized poly(3,4-ethylenedioxythiophene) (PEDOTAc) nanorods for specific and sensitive detection of SARS-CoV-2 spike protein (S1). The 3D-shaped PEDOTAc nanorods offer an ample surface area for receptor immobilization grown on indium-tin oxide surfaces through transfer-printing technology. Characterization via electrochemical, fluorescence, X-ray photoelectron spectroscopy, and scanning electron microscopy techniques confirmed the structural and morphological properties of the AuNPs-decorated PEDOTAc. In contrast to antibody-based assays, our platform employs ACE2 receptors for spike protein binding. Differential pulse voltammetry records current responses, showing linear sensitivity from 100 ng to 10 pg/mL of S1. In addition, the SARS-CoV-2 assay (CoVPNs) also exhibited excellent selectivity against nonspecific target proteins (H9N2, IL-6, and Escherichia coli). Furthermore, the developed surface maintained good stability for up to 7 consecutive days without losing performance. The results provide new insight into effective 3D conductive nanostructure formation, which is promising in the development of versatile sensory devices.

Biguanide- and Oligo(Ethylene Glycol)-Functionalized Poly(3,4-Ethylenedioxythiophene): Electroactive, Antimicrobial, and Antifouling Surface Coatings.

The challenge of infectious diseases remains a critical concern to the global public health. Recently, it is common to encounter touch-screen electronic devices everywhere to access services. The surface of such devices may easily get contaminated by an infected person, which leads to transmission of infectious diseases between individuals. Moreover, the challenge is complicated by surgical infections from implantable biomedical devices. Such problems can be minimized by the use of long-term active antimicrobial surface coatings. We present herein the preparation of novel electroactive antimicrobial surface coatings through the covalent attachment of the biguanide moiety onto 3,4-ethylenedioxythiophene (EDOT). The biguanide-functionalized EDOT (EDOT-BG) was thus electropolymerized on different substrates to give the corresponding poly(EDOT-BG) polymer. The poly(EDOT-BG) polymer showed an excellent bactericidal efficiency (∼92% bacterial death) and excellent biocompatibility with mammalian cells. Furthermore, the antimicrobial EDOT-BG was electro-copolymerized with antifouling tetra ethylene glycol functionalized-EDOT (EDOT-EG4) to give a multifunctional poly(EDOT-EG4-co-EDOT-BG) copolymer. The poly(EDOT-EG4-co-EDOT-BG) copolymer showed excellent resistance to protein adsorption and mammalian/bacterial cell binding without losing its bactericidal efficiency. These novel materials can be applied to domestic and bioelectronic devices to minimize infectious diseases.

Synthesis of MOF525/PEDOT Composites as Microelectrodes for Electrochemical Sensing of Dopamine.

Dopamine (DA) is an important neurotransmitter responsible for the functions and activities of multiple systems in human. Electrochemical detection of DA has the advantages of fast analysis and cost-effectiveness, while a regular electrode probe is restricted to laboratory use because the probe size is too large to be suitable for an in vivo or in vitro analysis. In this study, we have developed porphyrin-based metal organic framework (MOF525) and poly(3,4-ethylenedioxythiophene) (PEDOT)-based composites to modify microelectrode for DA detection. Two types of PEDOT monomers with different functional groups were investigated in this study. By varying the monomer ratios, electrolyte concentrations, and electropolymerization temperature, it was found that the PEDOT monomer containing carboxylic group facilitated the formation of regular morphology during the electropolymerization process. The uniform morphology of the PEDOT promoted the electron transmission efficiency in the same direction, while the MOF525 provided a large reactive surface area for electrocatalysis of DA. Thus, the MOF525/PEDOT composite improved the sensitivity-to-noise ratio of DA signaling, where the sensitivity reached 11 nA/µM in a good linear range of 4-100 µM. In addition, porphyrin-based MOF could also increase the selectivity to DA against other common clinical interferences, such as ascorbic acid and uric acid. The as-synthesized microelectrode modified with MOF525/PEDOT in this study exhibited great potential in real time analysis.

Deprotonation-Induced Conductivity Shift of Polyethylenedioxythiophenes in Aqueous Solutions: The Effects of Side-Chain Length and Polymer Composition.

Deprotonation-induced conductivity shift of poly(3,4-ethylenedixoythiophene)s (PEDOTs) in aqueous solutions is a promising platform for chemical or biological sensor due to its large signal output and minimum effect from material morphology. Carboxylic acid group functionalized poly(Cn-EDOT-COOH)s are synthesized and electrodeposited on microelectrodes. The microelectrodes are utilized to study the effect of carboxylic acid side-chain length on the conductivity curve profiles in aqueous buffer with different pH. The conductivity shifts due to the buffer pH are effected by the length of the carboxylic acid side-chains. The shifts can be explained by the carboxylic acid dissociation property (pKa) at the solid-liquid interface, self-doping effect, and effective conjugation length. Conductivity profiles of poly(EDOT-OH-co-C2-EDOT-COOH) copolymers are also studied. The shifts show linear relationship with the feed monomer composition used in electrochemical polymerization.

Electrically Responsive, Nanopatterned Surfaces for Triggered Delivery of Biologically Active Molecules into Cells.

Polyelectrolyte multilayers (PEMs) assembled layer-by-layer have emerged as functional polymer films that are both stable and capable of containing drug molecules for controlled release applications. Most of these applications concentrate on sustained release, where the concentration of the released molecules remains rather constant with time. However, high-efficiency delivery requires obtaining high local concentrations at the vicinity of the cells, which is achieved by triggered release. Here, we show that a nanopatterned PEM platform demonstrates superior properties with respect to drug retention and triggered delivery. A chemically modified block copolymer film was used as a template for the selective deposition of poly(ethylene imine) and a charged derivative of the electroactive poly(3,4-ethylenedioxythiophene) together with a drug molecule. This nanopatterned PEM shows the following advantages: (1) high drug loading; (2) enhanced retention of the bioactive molecule; (3) release triggered by an electrochemical stimulus; (4) high efficacy of drug delivery to cells adsorbed on the surface compared to the delivery efficacy of a similar concentration of drug to cells suspended in a solution.

Antimicrobial and Dyeing Properties of Reactive Dyes with Thiazolidinon-4-one Nucleus.

Four imines, the condensation products of 2,4-dioxo-4-phenylbutanal with four primary amines, were condensed with mercapto acetic acid to obtain thiazolidinon-4-ones which on subsequent condensation with vanillin and isatin separately yielded eight thiazolidin-4-one derivatives. The chemical structures of the synthesized compounds were elucidated by elemental analysis, molecular weight determination, IR and (1)H and (13)C NMR spectral measurements. Antibacterial and antifungal properties were studied in vitro against two bacteria and two fungi. The dyeing potential of synthesized reactive dyes was investigated with regard to silk, wool, cotton, and polyester fabrics under hot and cold dyeing conditions.