Inventory of emissions of primary air pollutants in the city of Kocaeli, Turkey.

This study aims to obtain a reliable inventory of the emission rates of the principal air pollutants including PM, SO2, NOx) and CO in Kocaeli, Turkey. In the first stage, the pollutant sources classified as point, area and line sources are determined in the area. Then the annual emission rates of the pollutants released from these sources are estimated by the emission factors given by USEPA and CORINAIR. Results show that the annual emission rates for PM, SO2, NOx) and CO are 2195 tons, 5342 tons, 14632 tons and 23095 tons, respectively. On the other hand, the pollutant group with the highest contribution to total emission rate is determined as the point sources for NOx, which is responsible for 73% of total NOx emission, while it is the area sources for PM, SO2 and CO with the contribution percentages of 75, 76 and 69, respectively.

Atmospheric deposition of polycyclic aromatic hydrocarbons to Izmit Bay, Turkey.

Wet deposition and dry deposition samples were collected in an urban/industrialized area of Izmit Bay, North-eastern Marmara Sea, Turkey, from September 2002 to July 2003. The samples were analyzed for sixteen polycyclic aromatic hydrocarbon (PAH) compounds by using HPLC-UV technique. Wet and dry deposition concentrations and fluxes of PAHs were determined. The results showed that PAH concentrations were high because of industrial processes, heavy traffic and residential areas next to the sampling site. Total dry deposition flux of the fifteen 3-6 ring PAHs was 8.30 microg m(-2)day(-1), with a range of 0.034-1.77 microg m(-2)day(-1). The total wet deposition flux of the fifteen 3-6 ring PAHs was 1716 microg m(-2) 11 month(-1), with a range of 10-440 microg m(-2) 11 month(-1). Significant seasonal differences were observed in both types of deposition samples. The winter fluxes of total PAHs were 1.5 and 2.5 times greater than those of the warm period for wet and dry deposition samples, respectively. Factor analysis of dry deposition samples and back trajectory analysis of wet deposition samples were also used to characterize and identify the PAH emission sources in this study.

Ecological risk assessment using trace elements from surface sediments of Izmit Bay (Northeastern Marmara Sea) Turkey.

The aim of this study was to study ecological risk assessment of trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) in Izmit Bay surface sediments in the <63 microm fraction. Sediment samples were collected from 8 sites along the north coastline of the bay. Samples were subjected to a total digestion technique and analyzed for major (organic carbon) and minor (As, Cd, Cr, Cu, Ni, Pb and Zn) elements. Sediments heavily contaminated are evaluated by the Sediment Quality Guidelines (SQG) of US EPA. The degree of contamination (Cd) is estimated as very high at each site. Two sets of SQGs, effect range-low/effect range median values and TEL/probable effect level (PEL) values were used in our study. Sediments from the each site are judged toxic when two or more of the PEL values exceed EPA guidelines. Our results are in agreement with previously reported sediment toxicity test results.

An evaluation of the occupational health risks to workers in a hazardous waste incinerator.

A study was conducted to evaluate the health impact of airborne pollutants on incinerator workers at IZAYDAS Incinerator, Turkey. Ambient air samples were taken from two sampling points in the incinerator area and analyzed for particulate matter, heavy metals, volatile and semi-volatile organic compounds (VOCs and SVOCs) and dioxins. The places where the maximum exposure was expected to occur were selected in determining the sampling points. The first point was placed in the front area of the rotary kiln, between the areas of barrel feeding, aqueous and liquid waste storage and solid waste feeding, and the second one was near the fly ash transfer line from the ash silo. Results were evaluated based on the regulations related to occupational health. Benzene, dibromochloropropane (DBCP) and hexachlorobutadiene (HCBD) concentrations in the ambient air of the plant were measured at levels higher than the occupational exposure limits. Dioxin concentrations were measured as 0.050 and 0.075 pg TEQ.m(-3), corresponding to a daily intake between 0.007 and 0.01 pg TEQ. kg body weight(-1).day (-1). An assessment of dioxin congener and homologue profiles suggested that gaseous fractions of dioxin congeners are higher in front of the rotary kiln, while most of them are in particle-bound phases near the ash conveyor. Finally, the necessity of further studies including occupational health and medical surveillance assessments on the health effects of the pollutants for the workers and the general population in such an industrialized area was emphasized.

Removal of PCDD/Fs from flue gas by a fixed-bed activated carbon filter in a hazardous waste incinerator.

The adsorption of polychlorinated dibenzodioxins and dibenzofurans (PCDD/Fs) by activated carbon (AC) was examined in a fixed-bed AC unit in a hazardous waste incinerator (IZAYDAS) in Turkey. Results showed that the removal efficiencies of PCDD/Fs decrease as the chlorination level increases, which was explained by the difference in gas/particle partitioning of the compounds. Since dioxins are tightly adsorbed by activated carbon, other flue gas constituents showed no clear effect on the dioxin removal. Adsorption kinetics indicated that the adsorption of volatile congeners and homologues fits well with Henry's law, possibly due to the higher gaseous fractions, while the correlation was lower for lowly volatile ones. PCDD/F congeners and homologues had a concentration value up to which no adsorption occurred, which could be attributed to the insufficient contact times at the low concentrations.

An investigation of halogens in Izmit hazardous and clinical waste incinerator.

In the combustion facilities, halogens (Cl, F, Br, I) should be considered with regard to the control of the compounds such as polychlorinated dibenzodioxins (PCDD), polychlorinated dibenzofurans (PCDF), halogenated polyaromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB) and volatile heavy metals formed as a result of incomplete combustion and caused adverse environmental effects. In this study halogens were observed in Izmit Hazardous and Clinical Waste Incinerator (IZAYDAS). Halogen contents of the combustion menu, flue gas, fly ash, bottom ash and filter cake were measured and their distributions in these exit streams were determined. Results showed that the major part of the halogens was partitioned to solid residues, i.e., bottom ash and filter cake which represents the removal by wet scrubbers. Fly ash and flue gas fractions of halogens were much lower due to the reduced formation of volatile compounds.

Partitioning characteristics of targeted heavy metals in IZAYDAS hazardous waste incinerator.

Partitioning of eight targeted heavy metals (Cr, Mn, Cu, Pb, Sn, Co, Ni and Zn) was carried out during five trial burns in Izmit hazardous and clinical waste incinerator (IZAYDAS). Metal contents of the original wastes and their concentration in the bottom ash (BA), fly ash (FA), filter cake (FC) and flue gas were determined. Partitioning behavior of metals during the two-stage incineration was evaluated with respect to physico-chemical properties of feed waste and metals, and the operational conditions. Results suggest that combustion temperatures and retention times are the dominant parameters determining the volatility of metals in the first combustion chamber. Targeted metals were generally partitioned in the rank of bottom ash, filter cake, fly ash and flue gas. High filter cake/fly ash ratios showed that high temperatures in the second stage increase both the formation of gaseous metallic compounds and the enrichment of metals in fine particles. Since ESP could not be effective in removing fine particles and volatilized metallic compounds, the necessity of an additional system that would remove heavy metals efficiently was emphasized for the modern incinerators.