Effect of Polymer Waste Mix Filler on Polymer Concrete Composites.

The hazards of polymer waste and emitted gas on the environment pose a global challenge. As a trial to control this, the current work aims to reuse the polymer waste mix (PM) as fillers in calcium silicate to prepare new composites of environmentally friendly polymer concrete. PM was first subjected to treatment to obtain treated PM (TPM) and then was filled in new dicalcium silicate cement with different concentrations. The microstructural characterizations declare the successful preparation of the dicalcium silicate base material. After the curing reaction, the precipitated carbonate main product is responsible for the gained properties. The CO2 uptake% in the proposed composites reached 16.6%, referring to the successful storage of CO2 gas during curing. The treatment reaction led to an increase in the flexural and compression strengths due to the strengthening of the polymer waste mix-cement interface; the strengths were increased gradually with more contents of TPM fillers. 7% TPM-cement concentration achieved the highest flexural strength and compression strength of10.2 and 12.7%, respectively, compared with blank cement. The used polymer improved slightly the pull-off force of the prepared cement, and 7 and 5% TPM-cement composites have the maximum values. All the proposed composites passed the impact testing without failure, where the combination between the polymer waste and silicate cement resulted in a stable composite surface. Compared with the blank, the different concentrations of TPM-cement composites show more stability against water absorption. In addition, the proposed composites and blank cement have a very low carbon dioxide emission. The ability to recycle the polymer waste, form new type of low-energy silicate, improve the mechanical and surface properties, uptake CO2 gas, and reduce gas emission makes the proposed polymer waste mix-cement composites as environmentally friendly construction products.

Environmentally Friendly Polymer Concrete: Polymer Treatment, Processing, and Investigating Carbon Footprint with Climate Change.

Climate change is being currently faced globally; controlling the plastic waste and gas emission is aimed to reduce their hazardous effects. In this work, polyethylene terephthalate (PET) and polyvinyl chloride (PVC) polymer wastes are used as fillers to calcium silicate. Chemical treatment was performed to get the best efficiency of the binder material with the treated PET (TPET) and treated PVC (TPVC). The used silicate, new nonhydraulic dicalcium silicate, was synthesized by sintering. A new environmentally friendly polymer concrete, based on different concentrations of PET-/TPET-/PVC-/TPVC-dicalcium silicate composites, was prepared and cured by carbonation. FTIR analysis confirms that the treatment gave functional groups on the polymer surface; also, the hydrophilicity was increased after treatment. SEM photos show that the treated polymers have a rougher surface, which led to improved attachment with cement. The structures of the prepared and cured cement materials are proved by XRD, FTIR analysis, and SEM, through the change of calcium silicate to carbonate. Carbon footprint is used to analyze the environmental implications of the prepared composites. After the treatment reaction, the TPET-cement and TPVC-cement composites showed improved compression and flexural properties and more stability against water absorption. The novelty arises from recycling this plastic waste in the proposed low-energy dicalcium silicate cement, for the first time, to give improved environmentally friendly composites after converting CO2 gas to carbonates, with the reduced carbon footprint.

Using Targeted Sequencing of Paralogous Sequences for Noninvasive Detection of Selected Fetal Aneuploidies.

BACKGROUND: Current methods for noninvasive prenatal testing (NIPT) ascertain fetal aneuploidies using either direct counting measures of DNA fragments from specific genomic regions or relative measures of single nucleotide polymorphism frequencies. Alternatively, the ratios of paralogous sequence pairs were predicted to reflect fetal aneuploidy. We developed a NIPT assay that uses paralog sequences to enable noninvasive detection of fetal trisomy 21 (T21) and trisomy 18 (T18) using cell-free DNA (cfDNA) from maternal plasma. METHODS: A total of 1060 primer pairs were designed to determine fetal aneuploidy status, fetal sex, and fetal fraction. Each library was prepared from cfDNA by coamplifying all 1060 target pairs together in a single reaction well. Products were measured using massively parallel sequencing and deviations from expected paralog ratios were determined based on the read depth from each paralog. RESULTS: We evaluated this assay in a blinded set of 480 cfDNA samples with fetal aneuploidy status determined by the MaterniT21® PLUS assay. Samples were sequenced (mean = 2.3 million reads) with 432 samples returning a result. Using the MaterniT21 PLUS assay for paired plasma aliquots from the same individuals as a reference, all 385 euploid samples, all 31 T21 samples, and 14 of 16 T18 samples were detected with no false positive results observed. CONCLUSIONS: This study introduces a novel NIPT aneuploidy detection approach using targeted sequencing of paralog motifs and establishes proof-of-concept for a potentially low-cost, highly scalable method for the identification of selected fetal aneuploidies with performance and nonreportable rate similar to other published methods.

Crossed Wires Versus 2 Lateral Wires in Management of Supracondylar Fracture of the Humerus in Children in the Hands of Junior Trainees.

OBJECTIVES: The objective of this study was to evaluate and compare the outcome of the crossed and the lateral pin configurations in the management of supracondylar humeral fractures in children in the hands of junior trainees. DESIGN: Prospective randomized controlled trial. SETTING: Level I Trauma Center. PATIENTS: Sixty children with supracondylar humeral fractures. The mean age was 5.1 years (1.5-9 years). The minimum follow-up period was 6 months, with no patients lost to follow up. INTERVENTION: Thirty patients were managed by crossed and 30 by the lateral method. All surgeries were performed by junior trainees in their first 3 years of training. MAIN OUTCOME MEASUREMENTS: Postoperative stability, ulnar nerve injury, range of motions, and pin tract infection. RESULTS: The crossed configuration was stable in all the patients, whereas the lateral method was less stable in 20% of the cases because the distal fragment rotated in 5 patients and posteriorly displaced in 1 patient. The difference was statistically significant with a P value of 0.031. Ulnar nerve neurapraxia occurred in 1 patient from the lateral group and it recovered in the fourth month, whereas no ulnar nerve injury occurred in the crossed configuration group. Two patients in the lateral group lost approximately 100 of elbow flexion. CONCLUSIONS: This prospective randomized controlled trial showed that the crossed pin configuration method provided more stability than the lateral pin configuration, especially, in the hands of junior trainees in their first 3 years of training, and the difference was statistically significant. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.