ABSTRACT
Embedding silicon nanoparticles in an intermetallic matrix is a promising strategy to produce remarkable bulk anode materials for lithium-ion (Li-ion) batteries with low potential, high electrochemical capacity and good cycling stability. These composite materials can be synthetized at a large scale using mechanical milling. However, for Si-Ni3Sn4 composites, milling also induces a chemical reaction between the two components leading to the formation of free Sn and NiSi2, which is detrimental to the performance of the electrode. To prevent this reaction, a modification of the surface chemistry of the silicon has been undertaken. Si nanoparticles coated with a surface layer of either carbon or oxide were used instead of pure silicon. The influence of the coating on the composition, (micro)structure and electrochemical properties of Si-Ni3Sn4 composites is studied and compared with that of pure Si. Si coating strongly reduces the reaction between Si and Ni3Sn4 during milling. Moreover, contrary to pure silicon, Si-coated composites have a plate-like morphology in which the surface-modified silicon particles are surrounded by a nanostructured, Ni3Sn4-based matrix leading to smooth potential profiles during electrochemical cycling. The chemical homogeneity of the matrix is more uniform for carbon-coated than for oxygen-coated silicon. As a consequence, different electrochemical behaviors are obtained depending on the surface chemistry, with better lithiation properties for the carbon-covered silicon able to deliver over 500 mAh/g for at least 400 cycles.
ABSTRACT
Cellulose fabrics were coated with polypyrrole-silver (PPy/Ag) nanocomposite films via one pot photopolymerization in aqueous media. This process was optimized for various concentrations of pyrrole/textile weight ratios with fixed molar ratio of [pyrrole]/[AgNO(3)] as 2.5. Simple weight measurements of the fabrics indicated progressive coating of PPy/Ag versus initial pyrrole/fabric weight ratio and photopolymerization time. X-ray diffraction (XRD) data confirm the nano-size (10-30 nm) and metallic state of Ag crystallites. The metallic state of silver particles was also confirmed by X-ray photoelectron spectroscopy (XPS). We demonstrate that UV-induced polymerization of pyrrole in the presence of AgNO(3) is simple and fast compared to chemical oxidative polymerization in the absence of UV light. More importantly, it permits to coat cellulose fabrics in one pot by polypyrrole/Ag nanocomposites films in environmentally friendly aqueous solutions at room temperature.
