Muffin-Type Bakery Product Based on Mexican Mesquite (Prosopis spp.) Flour: Texture Profile, Acceptability, and Physicochemical Properties.

In this research, muffin-type bakery products were developed based on wheat flour (WF) and mesquite flour (MF) in the following proportions: WFMF 90:10, WFMF 75:25, and WFMF 50:50. The products were characterized based on various properties in which it was possible to observe that the water activity (aw) did not show a significant change with the increase in the concentration of MF. In addition, the increase in the concentration of MF modified the sensory properties (color, odor, flavor, texture, and acceptance), further decreasing the luminosity and increasing the values of the a* and b* coordinates. Moreover, in the texture profile analysis, it was found that the increase in the MF concentration increased hardness, fracturability, and gumminess and decreased adhesiveness and cohesiveness. All the previously mentioned changes were more evident in the WFMF50:50 and, to a lesser degree, in WFMF75:25. In general, in most evaluations realized, the WFMF90:10 treatment was the most similar to the control (without MF). However, WFMMF75:25 provided a higher protein and fiber content and a lower fat content. Finally, it is possible to use the flour obtained from the mesquite fruit to make bakery products since it is an important source of food due to the wide distribution of mesquite in the country.

Amoebicidal and trichomonicidal capacity of polymeric nanoparticles loaded with extracts of the plants Curcuma longa (Zingiberaceae) and Berberis vulgaris (Berberidaceae) / Capacidad amebicida y tricomonicida de nanopartículas poliméricas cargadas con extractos de las plantas Curcuma longa (Zingiberaceae) y Berberis vulgaris (Berberidaceae)

Abstract Introduction: Pathogenic protozoans, like Entamoeba histolytica and Trichomonas vaginalis, represent a major health problem in tropical countries; and polymeric nanoparticles could be used to apply plant extracts against those parasites. Objective: To test Curcuma longa ethanolic extract and Berberis vulgaris methanolic extracts, and their main constituents, against two species of protozoans. Methods: We tested the extracts, as well as their main constituents, curcumin (Cur) and berberine (Ber), both non-encapsulated and encapsulated in polymeric nanoparticles (NPs), in vitro. We also determined nanoparticle characteristics by photon correlation spectroscopy and scanning electron microscopy, and hemolytic capacity by hemolysis in healthy erythrocytes. Results: C. longa consisted mainly of tannins, phenols, and flavonoids; and B. vulgaris in alkaloids. Encapsulated particles were more effective (P < 0.001); however, curcumin and berberine nanoparticles were the most effective treatments. CurNPs had IC50 values (µg/mL) of 9.48 and 4.25, against E. histolytica and T. vaginalis, respectively, and BerNPs 0.24 and 0.71. The particle size and encapsulation percentage for CurNPs and BerNPs were 66.5 and 73.4 nm, and 83.59 and 76.48 %, respectively. The NPs were spherical and significantly reduced hemolysis when compared to non-encapsulated extracts. Conclusions: NPs represent a useful and novel bioactive compound delivery system for therapy in diseases caused by protozoans.

Resumen Introducción: Los protozoos patógenos, como Entamoeba histolytica y Trichomonas vaginalis, representan un importante problema de salud en los países tropicales; y se podrían usar nanopartículas poliméricas para aplicar extractos de plantas contra esos parásitos. Objetivo: Probar los extractos etanólicos de Curcuma longa y Berberis vulgaris, y sus principales constituyentes, contra dos especies de protozoos. Métodos: Probamos los extractos, así como sus principales constituyentes, curcumina (Cur) y berberina (Ber), tanto no encapsulados como encapsulados en nanopartículas poliméricas (NPs), in vitro. También determinamos las características de las nanopartículas por espectroscopía de correlación de fotones y microscopía electrónica de barrido, y la capacidad hemolítica por hemólisis en eritrocitos sanos. Resultados: C. longa tenía principalmente: taninos, fenoles y flavonoides; y B. vulgaris, alcaloides. Las partículas encapsuladas fueron más efectivas (P < 0.001); sin embargo, las nanopartículas de curcumina y berberina fueron los tratamientos más efectivos. CurNPs tenía valores IC50 (µg/mL) de 9.48 y 4.25, contra E. histolytica y T. vaginalis, respectivamente, y BerNPs 0.24 y 0.71. El tamaño de partícula y el porcentaje de encapsulación para CurNPs y BerNPs fueron: 66.5 y 73.4 nm, y 83.59 y 76.48 %, respectivamente. Los NP son esféricos y redujeron significativamente la hemólisis en comparación con los extractos no encapsulados. Conclusiones: Las NP representan un sistema de administración de compuestos bioactivos útil y novedoso para la terapia enfermedades causadas por protozoos.

Production and Characterization of Biocomposite Films of Bacterial Cellulose from Kombucha and Coated with Chitosan.

The purpose of this research is to produce and characterize bacterial cellulose (BC) films coated with chitosan (BC-CH). BC films were produced in a fermentation medium based on Camellia sinensis tea and dextrose (12 days at 25 °C) and subsequently treated with coating-forming solutions (CFSs) based on chitosan (BC-CH 0.5%, BC-CH 1.0%, and BC-CH 1.5%). As a result, the FTIR spectra of BC and BC-CH 1.5% showed the main characteristic bands of cellulose and chitosan. In the physicochemical characterization of the films, it was found that the incorporation of the chitosan coatings did not affect the thickness; however, it decreased the luminosity (L*) and increased redness (a*), yellowness (b*), and opacity (75.24%). Additionally, the light absorption properties in the UV-Vis range were improved. Furthermore, the application of the CFSs increased: the solubility (64.91%), the antimicrobial activity against S. aureus (6.55 mm) and E. coli (8.25 mm), as well as the antioxidant activity (57.71% and 24.57% free radical scavenging activity), and the content of total phenols (2.45 mg GAE/g). Finally, our results suggest that the BC-CH films developed in the present study show a potential application as active packaging material for food.

Comparison of Chemical Composition, Physicochemical Parameters, and Antioxidant and Antibacterial Activity of the Essential Oil of Cultivated and Wild Mexican Oregano Poliomintha longiflora Gray.

Mexican oregano Poliomintha longiflora Gray located in the municipality of Higueras, Nuevo Leon, Mexico was collected during the autumn (September, OCO), winter (January, OCI) and summer (June, OCV) seasons, under cultivation conditions. It was also collected in wild conditions during the autumn (OSO). Essential oil (EO) was extracted from leaves and the color, refractive index and density were reported. The EO yield, antioxidant activity by ORAC assay, thymol and carvacrol concentration and antibacterial activity were statistically compared (p-value = 0.05). Among the various harvests, the highest EO yield, antioxidant activity, thymol and carvacrol content and antibacterial activity against Salmonella Typhi were observed in leaves harvested in autumn. In order to compare wild oregano with cultivated oregano, analyses were performed in the season with the highest essential oil yield and antioxidant activity, recorded in autumn. The main difference found was the ratio of thymol:carvacrol in wild oregano oil, which was 1:8.6, while in cultivated oregano, it was approximately 1:2, which was maintained in all three seasons. The EO on wild conditions showed the best antibacterial activity in Salmonella Typhi. On the other hand, wild and cultivated oregano showed similar antioxidant activity. One advantage of the use of cultivated oregano is that its supply is guaranteed, in contrast to that of wild oregano.

Protein Concentrates on Tepary Bean (Phaseolus acutifolius Gray) as a Functional Ingredient: In silico Docking of Tepary Bean Lectin to Peroxisome Proliferator-Activated Receptor Gamma.

The tepary bean (Phaseolus acutifolius Gray) is a US-Mexico frontier native crop, produces high yields in agriculture, and needs to be reconsidered because of its nutritional and functional properties. This study aimed to determine the technological and nutritional properties of flours and protein concentrates of tepary bean, besides determining an in silico agonist effect of tepary bean lectin to peroxisome proliferator-activated receptor gamma (PPAR-γ). We evaluated the technological properties of raw samples (tepary flour and tepary protein concentrate) and cooked samples (tepary flour and tepary protein concentrate). The flours present a significant difference (p < 0.05) concerning protein concentrates in water absorption and oil absorption capacity. The raw samples' emulsifying capacity was higher than that reported in the literature for other legumes, but not the cooked samples. The samples' foaming capacity had no significant difference in treatments (p > 0.05), and cooked tepary bean protein concentrate presented complete gelation at a lower concentration (2%). Nutritionally, raw samples present a protein percentage of 23.46 ± 0.06 and 71.38 ± 0.44 and cooked samples present a protein percentage of 25.27 ± 0.04 and 62.69 ± 0.14; a chemical score of 72, 86, 82, and 72; in vitro protein digestibility (%) = 48.20 ± 0.31, 49.80 ± 0.80, 61.77 ± 1.70, and 63.61 ± 4.19; and C-PER = 0.86, 1.34, 1.93, and 1.81, respectively. All the samples showed methionine + cysteine as the limiting amino acid. All these nutritional data are very similar to the common bean (Phaseolus vulgaris). SDS-PAGE preserves the lectin fraction in both protein concentrates. The in silico study of tepary lectin (PDB: 6tt9) shows that there were seven peptides that presented values below -120 kcal/mol: PEW, VSVGF, PSQK, TTPW, ATSF, ITY, and TSF, with VSVGF, PSQK, and PEW having the highest affinity for active sites of the PAPRγ receptor (binding energies from -5.32 to -7.04 kcal/mol). These peptides could show antiadipogenic or antidiabetic activity based on the intermolecular bond energies and open an interesting research item.

Valorization of Almond (Prunus serotina) by Obtaining Bioactive Compounds.

The Capulin almond is a seed of the Prunus serotina (var. capuli) that belongs to the Rosaceae family. In this study, the valorization of the Capulin almond was performed by extracting antioxidants contained in the shell, paste, and oil (extracted by manual cold pressing process) of Prunus serotina treated with methanol, ethanol, acetone, and acidified water (pH 4) in a ratio of 1:5 (w/v). Total phenols were performed using the Folin-Ciocalteu method and expressed as gallic acid equivalents (GAE), antioxidant activity was determined by ABTS and DPPH methods and expressed as Trolox equivalents (TE). Finally, the total flavonoids were determined using a catechin calibration curve and reported as catechin equivalents (CE). The highest extraction of total phenols in shell was obtained with methanol (1.65 mg GAE/g sample) and the lowest using acidified water (0.97 mg GAE/g sample). However, extraction with acidified water favored this process in the paste (1.42 mg GAE/g sample), while the use of solvents did not influence it significantly (0.72 to 0.79 mg GAE/g sample). Regarding the total flavonoids, the values for the shell, paste, and oil were of 0.37, 0.78, and 0.34 mg CE/g sample, respectively, while that corresponding to the antioxidant activity evaluated with ABTS and DPPH were of 1527.78, 1229.17, 18894.44 µM TE/g, and, 568.45, 562.5 and 4369.05 mM TE/g sample, respectively. Finally, our results suggest that by-products such as the shell, paste, and oil obtained from Prunus serotina (var. capuli) represent a potential alternative for the recovery of bioactive compounds with antioxidant activity such as phenolic compounds and flavonoids.

Rheological and Nutritional Characterization of Sweet Corn By-Product (Cob) to Develop a Functional Ingredient Applied in Dressings.

In this study, a flour from corn cob (central core of the maize ear, stage R4) was obtained through three treatments. The three flours obtained were characterized by bromatological analysis, yield, and granulometry. Additional dressing-type oil in water (O/W) emulsions were developed, varying the formulation by incorporating distinct amounts of corn cob flour. The formulations' stability was evaluated over a period of 21 days, determining the particle size, creaming index, coalescence rate, consistency coefficient (k), and flow behavior indices (n). Results have shown significant differences in protein, fat, and carbohydrate content in the flour, depending on the cooking treatment. A good percentage of grinding yield was obtained (98%), in addition to several fractions by granulometry (60, 120, 250 MESH), showing differences in their nutritional content. Finally, the particle size of O/W emulsions developed varied among formulations. The combination of 0.6% of xanthan gum (XG) and corn cob flour showed major stability in average droplet size. No significant differences were observed in the coalescence rate values for the three formulations. Still, significant differences in the creaming index were evidenced in those formulations without XG or corn cob flour. The results regarding the consistency coefficient (k) and flow behavior indices (n) suggest a possible synergy between XG and flour of corn cob for enhancing the viscosity and pseudoplasticity of dressings in a concentration-dependent manner.

Studied of Prunus serotine oil extracted by cold pressing and antioxidant effect of P. longiflora essential oil.

Prunus serotine oil, was extracted from the seeds without shells, resulting in an oil yield of 23.41 ± 3.62%. Through GC it was shown that 52.38% of the total fatty acids present in the oil were polyunsaturated fatty acids. The fatty acids profile presented in the P. serotine oil were oleic (41.42%), linoleic (26.97%) and α-eleostearic acid (25.33%). It had a high concentration of total phenols (221 ± 15.85 mg as gallic acid equivalents/kg oil) and flavonoids (0.77 ± 0.01 mg catechin equivalents/kg oil). The antiradical activity was 31.52 ± 2.71% and 12.94 ± 0.67% of radical inhibition for colorimetric methods using ABTS [2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid)] and DPPH (2,2-diphenyl-1-picrylhydrazyl), respectively. The activity inhibition was 2.3 (ABTS) and 1.8 (DPPH) times higher, respectively, than the ones of Prunus dulcis oil. Lipid oxidation showed that at day nine, P. serotine oil has it maximum hydroperoxide production through two methods (hydroperoxide and MDA). Three oregano fractions were added (code: 642, 655 and A01) as natural antioxidants at four different concentrations (3000, 300, 30 and 3 ppm) each one, to extend its shelf life. Fraction 642 managed to extend its shelf life until day 30 (30 °C ± 2 °C), in both methodologies. The fraction 642 at 3 ppm, controls the production of hydroperoxide formation. Resulting in values of 3.65 µM equivalents of cumene hydroperoxide/kg of oil and 10.29 µM equivalents of 1,1,3,3-Tetraethoxypropane/kg of oil, decreasing by 3.2 times the peroxide formation with respect to P. serotine oil without leaving a Poliomintha longiflora fraction.

Antimicrobial and Antibiofilm Effect of Hydrogel with Origanum vulgare on Culture of Streptococcus mutans and Streptococcus sobrinus

ABSTRACT: The oral cavity is an ecosystem that provides ideal conditions for the growth of bacteria, the Streptococcus genus is important for the formation of biofilms that lead to the development of dental caries, which affects the population worldwide. The world health organization encourages the use of plants thanks to its various therapeutic actions. Origanum vulgare L. (oregano), is an aromatic plant with medicinal and culinary properties. The objective of this study was to investigate the in vitro antimicrobial and antibiofilm activity of the ethanolic extract of oregano, against the growth of Streptococcus mutans and Streptococcus sobrinus ATCC. Leaves of the plant were obtained and the ethanolic extract was made by maceration. Antimicrobial activity was evaluated using the Kirby-Bauer method and compared with 2% chlorhexidine, subsequently the extract was incorporated into a hydrogel and its effect on biofilm formation was assessed by fluorescence microscopy and the main compounds were identified. present in the extratco. The study revealed that the extract presented antimicrobial effect against both strains and at 2% it showed high antimicrobial action compared to chlorhexidine at the same concentration, with average inhibition halos of 26.3 mm and 19 mm for each microorganism analyzed, (p < 0.05). Likewise, the hydrogel prepared with 2% extract significantly eliminated the preformed Streptococcus biofilm, at 24 hours of exposure, due to the presence of a variety of chemical groups, such as sterols, triterpenes, flavonoids, flavanones, flavanonol s, lactones. sesquiterpenic, tannins and coumarins. The oregano extract presented high antimicrobial action for both species, with a greater effect towards Streptococcus mutans and an interesting antibiofilm action; These results show the importance of exploring treatment alternatives of plant origin, to be considered as interesting complementary aids in dental therapy.

RESUMEN: La cavidad oral es un ecosistema que proporciona condiciones ideales para el crecimiento de bacterias, el género Streptococcus es importante para la formación de biopelículas que conducen al desarrollo de caries dental, que afecta a la población a nivel mundial. La organización mundial de la salud, fomenta el uso de plantas gracias a sus diversas acciones terapéuticas. Origanum vulgare L. (orégano), es una planta aromática con propiedades medicinales y culinarias. El objetivo de este estudio fue investigar la actividad antimicrobiana y antibiofilm in vitro del extracto etanólico de oregano, contra el crecimiento de Streptococcus mutans y Streptococcus sobrinus ATCC. Se obtuvierón hojas de la planta y se realizó el extracto etanólico mediante maceración. La actividad antimicrobiana se evaluó mediante el método de Kirby-Bauer y se comparó con la clorhexidina al 2 %, posteriormente se incorporó el extracto en un hydrogel y se valoró su efecto sobre la formación del biofilm mediante microscopía de fluorescencia y se identificó los principales compuestos presentes en el extratco. El estudio reveló que el extracto presentó efecto antimicrobiano contra ambas cepas y al 2 % mostró alta acción antimicrobiana en comparación con la clorhexidina a la misma concentración, con halos de inhibición promedio de 26.3 mm y de 19 mm para cada microorganismo analizado, (p < 0.05). Así mismo, el hidrogel preparado con extracto al 2 %, eliminó significativamente la biopelícula preformada de Streptococcus, a las 24 horas de exposición, debido a la presencia de una variedad de grupos químicos, como esteroles, triterpenos, flavonoides, flavanonas, flavanonoles, lactonas sesquiterpénicas, taninos y cumarinas. El extracto de orégano presentó alta acción antimicrobiana para ambas especies, con mayor efecto hacia el Streptococcus mutans y una acción antibiofilm interesante; estos resultados muestran la importancia de explorar en alternativas de tratamiento de origen vegetal, para considerarse como auxiliares complementarios interesantes en la terapia dental.

Inclusion Complexes of Concentrated Orange Oils and ß-Cyclodextrin: Physicochemical and Biological Characterizations.

Concentrated orange oils (5x, 10x, 20x) are ingredients used in different industries as components of flavors and aromas due to their great organoleptic qualities. This research focuses on the search for alternative uses for their application through encapsulation in inclusion complexes with ß-cyclodextrin (ß-CD). Inclusion complexes of concentrated orange oils (COEO) and ß-CD were developed by the co-precipitated method in ratios of 4:96, 12:88, and 16:84 (w/w, COEO: ß-CD). The best powder recovery was in the ratio 16:84 for the three oils, with values between 82% and 84.8%. The 20x oil in relation 12:88 showed the highest entrapment efficiency (89.5%) with 102.3 mg/g of ß-CD. The FT-IR analysis may suggest an interaction between the oil and the ß-CD. The best antioxidant activity was observed in the ratio 12:88 for the three oils. The antifungal activity was determined for all the inclusion complexes, and the 10x fraction showed the highest inhibition at a concentration of 10 mg/mL in ratios 12:88 and 16:84. Antibacterial activity was determined by the minimum inhibitory concentration (MIC) and was found at a concentration of 1.25 mg/mL in ratios 12:88 and 16:84 for 5x and 20x oils.

Development and Characterization of Gelled Double Emulsions Based on Chia (Salvia hispanica L.) Mucilage Mixed with Different Biopolymers and Loaded with Green Tea Extract (Camellia sinensis).

The aim of this research was to develop and characterize five gelled double emulsions based on chia mucilage (CM) and different biopolymers (κ-carrageenan, C; locust bean gum, L; thixogum, T; and whey protein concentrate, W) loaded with green tea extract (GTE). Gelled double emulsions consisted of W1 (whey-protein-concentrate/sodium-azide/NaCl/GTE)/O and (PGPR/canola-oi)/W2 (CM, CMC, CML, CMT and CMW), and were characterized based on physicochemical properties during 35 days of storage. Optical microscopy clearly showed the drops of the internal phase surrounded by droplets of oil dispersed in the second aqueous phase; the droplet size was higher for CMT and lowest for CMW. In addition, all emulsions were highly stable at creaming and were effective in reducing the loss of antioxidant activity (88.82%) and total phenols (64.26%) during storage; CMT, CML and CM were the most effective. Furthermore, all emulsions showed a protective effect by modulating the release of the GTE in a simulated gastrointestinal environment, allowing a controlled release during the gastric-intestinal digestion phases and reaching its maximum release in the intestinal phase (64.57-83.31%). Thus, gelled double emulsions are an alternative for the preservation of GTE and could be a potential alternative for their application in the development of functional foods.

Application of a Multisystem Coating Based on Polymeric Nanocapsules Containing Essential Oil of Thymus Vulgaris L. to Increase the Shelf Life of Table Grapes (Vitis Vinifera L.).

In developing countries, the incidence of postharvest losses reduces the quantity and quality of food for human consumption and causes an economical damage along the food chain, especially, for primary producers. In this study, a multisystem coating (NC-EOt-C) based on pullulan and polymeric nanocapsules containing EO of Thymus vulgaris L. (EOt) was applied to increase the shelf life of table grapes (Vitis vinifera L.). The major components of EOt, chemically characterized by GC-MS, were o-cymene (32.68%), thymol (31.90%), and γ -terpinene (15.69%). The NC-EOt were prepared by nanoprecipitation and showed a particle mean size of 153.9 nm, a polydispersity index of 0.186, a zeta potential of -4.11 mV, and an encapsulation efficiency of 52.81%. The antioxidant capacity (DPPH and ABTS+ methods) of EOt was maintained, or even improved, after its incorporation into NC. The shelf life study showed that grapes having the NC-EOt-C multisystem maintained their characteristics of color, firmness, TA, and SSC for longer time than those without the multisystem. NC-EOt-C multisystem acted as a barrier which reduced the metabolism of fruits. In addition, the compounds of EOt with antimicrobial activity avoided microorganism growth, while those with antioxidant activity reduced the oxidative stress induced during postharvest of grapes. Additionally, the polymeric structure of NC prevented the rapid evaporation of volatile compounds of EOt, increasing then their residence time on the fruit. Our study demonstrated that NC-EOt-C multisystem can be a viable alternative to preserve horticultural products for longer storage periods.

Feruloylated Arabinoxylans from Nixtamalized Maize Bran Byproduct: A Functional Ingredient in Frankfurter Sausages.

Feruloylated arabinoxylans obtained from nixtamalized maize bran were evaluated in terms of physicochemical characteristics and antioxidant capacity when incorporated in frankfurter sausages. Concentrations of 0.15% and 0.30% of feruloylated arabinoxylans were incorporated in frankfurter sausages formulations and a control without feruloylated arabinoxylans was also prepared. Shear force, hardness, color measurement, proximate analysis, pH, titratable acidity, water-holding capacity, total phenols, and antioxidant capacity were evaluated. Phenolic content and antioxidant capacity were significantly higher (P < 0.0001) in all treatments, sausages containing feruloylated arabinoxylans compared to the control. The results showed that there was a significant difference (P < 0.0001) in total phenolic content and antioxidant capacity with all feruloylated arabinoxylans sausages treatments higher than control. Additionally, significant differences (P < 0.0001) were obtained in the physicochemical parameters.

Effects of the Addition of Flaxseed and Amaranth on the Physicochemical and Functional Properties of Instant-Extruded Products.

The addition of flaxseed and amaranth on the physicochemical, functional, and microstructural changes of instant-extruded products was evaluated. Six mixtures with different proportions of amaranth (18.7-33.1%), flaxseed (6.6-9.3%), maize grits (55.6-67.3%) and minor ingredients (4.7%) were extruded in a twin-screw extruder. Insoluble and soluble fiber contents in extrudates increased as the proportions of amaranth and flaxseed increased. However, the highest flaxseed proportion had the highest soluble fiber content (1.9%). Extruded products with the highest proportion of flaxseed and amaranth resulted in the highest dietary fiber content and hardness values (5.2 N), which was correlated with the microstructural analysis where the crystallinity increased, resulting in larger, and more compact laminar structure. The extruded products with the highest maize grits proportion had the highest viscosity, expansion, and water absorption indexes, and the lowest water solubility index values. The mixtures with amaranth (18.7-22.9%), flaxseed (8.6-9.3%), and maize grits (63.8-67.3%) resulted in extruded products with acceptable physicochemical and functional properties.

Chemical Composition and Biological Activities of Oregano Essential Oil and Its Fractions Obtained by Vacuum Distillation.

Oregano (Poliomintha longiflora) essential oil (Ooil) is a product of high commercial value and many applications, including chemotherapy. Aiming to achieve the best use of this resource, the present study focuses on the characterization of separated fractions of Ooil by fractional vacuum distillation at low pressure. Four fractions (F1-F4) and undistilled oil (Unoil) were separated from Ooil and analyzed for their chemical composition and biological activities, such as antioxidant and antimicrobial activities. Gas chromatography-mass spectrometry shows differences in the composition among the fractions and Ooil. The amount of monoterpenes oxygenated (MO), sesquiterpenes hydrocarbon (SeH) and monoterpenes hydrocarbon (MH) varied between the fractions in ranges of 1.51-68.08, 3.31-25.12 and 1.91-97.75%, respectively. The major concentrations of MO and SeH were observed in F4 and Unoil. On the other hand, the highest concentrations of MH were found in F1 and F2, while the lowest were in F4 and Unoil. These results were correlated with the biological activity. Free-radical scavenging activity varied among fractions, with F4 and Unoil showing the highest activity. The antimicrobial test showed that F4 and Unoil had the highest activity in almost all cases. The correlation between the variables studied in the different fractions allows the definition of the particular properties for each one of them.

Studied of Defatted Flour and Protein Concentrate of Prunus serotine and Applications.

Prunus serotine seed, was processed to produce a defatted flour (71.07 ± 2.10% yield) without hydrocyanic acid. The total protein was 50.94 ± 0.64%. According to sensory evaluation of cookies with P. serotine flour, the highest score in overall impression (6.31) was at 50% flour substitution. Its nutritional composition stood out for its protein and fiber contents 12.50% and 0.93%, respectively. Protein concentrate (PsPC) was elaborated (81.44 ± 7.74% protein) from defatted flour. Emulsifying properties of PsPC were studied in emulsions at different mass fractions; ϕ = 0.002, 0.02, 0.1, 0.2, and 0.4 through physicochemical analysis and compared with whey protein concentrate (WPC). Particle size in emulsions increased, as did oil content, and results were reflected in microscope photographs. PsPC at ϕ 0.02 showed positive results along the study, reflected in the microphotograph and emulsifying stability index (ESI) test (117.50 min). At ϕ 0.4, the lowest ESI (29.34 min), but the maximum emulsifying activity index (EAI) value (0.029 m2/g) was reached. WPC had an EAI value higher than PsPC at ϕ ≥ 0.2, but its ESI were always lower in all mass fraction values. PsPC can compete with emulsifiers as WPC and help stabilize emulsions.

Comparative Reduction of Egg Yolk Cholesterol Using Anionic Chelating Agents.

Egg yolk is used as an emulsifying agent. Nevertheless, its high concentration of cholesterol is linked to chronic degenerative diseases that cause cardiovascular disease. In this study, three methods for reducing the level of cholesterol in egg yolks were studied. The first method consisted of physical separation of the granules contained in the yolk (NaG). The second method applied was the use of anionic chelating biopolymers, such as arabic gum solution (AG) and mesquite gum solution (MG), and the third method was extraction with a solvent (SA). For this purpose, the cholesterol present in egg yolks, the microstructure, particle size, zeta potential, and its emulsifying capacity were determined. The amount of cholesterol removed was 97.24% using 1% mesquite gum (MG1%), and 93.26% using 1% Arabic gum (AG1%). The zeta potential was determined, and the isoelectric point (ζ = 0) of egg yolk was identified as pH 4.6. While, at this pH, the zeta potential of mesquite gum was -14.8 mV, the zeta potential for the arabic gum was -16 mV. The emulsifying capacity of MG1% was 62.95%, while the emulsifying capacity of AG1% was 63.57%. The complex obtained can be used in the development of functional foods reduced in cholesterol.

Physicochemical, Functional, and Nutraceutical Properties of Eggplant Flours Obtained by Different Drying Methods.

The importance of consuming functional foods has led the food industry to look for alternative sources of ingredients of natural origin. Eggplants are a type of vegetable that is valued for its content in phytochemical compounds and it is due to the fact that this research is conducted towards the development of eggplant flour as a proposal to be used as a functional ingredient in the food industry. In this study, the eggplant fruits were divided into four groups, based on the drying method and the equipment used: Minced, drying oven (T1); sliced, drying oven (T2); sliced and frozen, drying tunnel (T3); and sliced, drying tunnel (T4). All the eggplant flours showed the same trend regarding their antioxidant capacity and phenolic content in the order T2 > T4 > T1 > T3. The freezing of eggplant was found to have a negative effect on functional and antioxidant properties. With respect to their nutritional composition, the flours did not change in their crude fiber, protein, and fat contents. In general terms, the T2 flour is a potential ingredient for the preparation of foods with functional properties since it is rich in phenolic compounds and antioxidants.

Increasing Antioxidant Activity and Protein Digestibility in Phaseolus vulgaris and Avena sativa by Fermentation with the Pleurotus ostreatus Fungus.

The aim of the research was to determine the impact of fermentation with Pleurotus ostreatus on kidney beans, black beans, and oats. The results indicate that the fungus has a positive effect on the substrates when compared to the controls. The antioxidant activity (39.5% on kidney beans and 225% on oats in relation to the controls) and content of total polyphenols (kidney beans three times higher regarding the controls) increased significantly by the presence of the fungus mycelium, even after simulated digestion. There was a significant increase in protein digestibility (from 39.99 to 48.13% in black beans, 44.06 to 69.01% in kidney beans, and 63.25 to 70.01% in oats) and a decrease of antinutrient tannins (from 65.21 to 22.07 mg in black beans, 35.54 to 23.37 in kidney beans, and 55.67 to 28.11 in oats) as well as an increase in the contents of some essential amino acids. Overall, this fermentation treatment with Pleurotus ostreatus improved the nutritional quality of cereals and legumes, making them potential ingredients for the elaboration and/or fortification of foods for human nutrition.

Physicochemical Changes and Resistant-Starch Content of Extruded Cornstarch with and without Storage at Refrigerator Temperatures.

Effects of extrusion cooking and low-temperature storage on the physicochemical changes and resistant starch (RS) content in cornstarch were evaluated. The cornstarch was conditioned at 20%-40% moisture contents and extruded in the range 90-130 °C and at screw speeds in the range 200-360 rpm. The extrudates were stored at 4 °C for 120 h and then at room temperature. The water absorption, solubility index, RS content, viscoelastic, thermal, and microstructural properties of the extrudates were evaluated before and after storage. The extrusion temperature and moisture content significantly affected the physicochemical properties of the extrudates before and after storage. The RS content increased with increasing moisture content and extrusion temperature, and the viscoelastic and thermal properties showed related behaviors. Microscopic analysis showed that extrusion cooking damaged the native starch structure, producing gelatinization and retrogradation and forming RS. The starch containing 35% moisture and extruded at 120 °C and 320 rpm produced the most RS (1.13 g/100 g) after to storage at low temperature. Although the RS formation was low, the results suggest that extrusion cooking could be advantageous for RS production and application in the food industry since it is a pollution less, continuous process requiring only a short residence time.