The British Ixworth: individual growth and egg production of a purebred dual-purpose chicken.

1. Killing male one-day-old chicks, especially from layer lines, is banned in some European countries. Therefore, dual-purpose chickens, where each sex is used for meat and egg production, respectively, offer an alternative production solution. This study evaluated the British purebred breed Ixworth as a dual-purpose chicken for meat and egg production.2. Ixworth chicks (n = 167) were hatched and reared mixed-sex in a floor housing system, with two groups receiving a commercial pullet diet (treatment 1) and two groups receiving a diet composed for males of layer lines (treatment 2). Individual chick performance data were recorded. Males were slaughtered at 12 weeks of age, and their growth rate and carcase variables were analysed. All hens were continuously reared on the pullet diet and kept in a free-range system from 20 weeks old for one laying period (52 weeks). In addition, group-based feed consumption and mortality were recorded.3. Cockerels in treatment 1 and 2 showed significantly different [T(88) = -2.846, P = 0.003] growth rates (25.3 vs. 27.4 g/day) and average final weights (2166 g vs. 2344 g). The hens in treatment 1 (n = 41) laid an average of 193 eggs per hen housed (mean egg weight: 56.9 g), whereas those in treatment 2 (n = 35) laid 195 eggs per hen housed (mean egg weight: 56.5 g). Nest acceptance was >97.5% and feed consumption was up to 140 g/bird/day.4. The results showed that the Ixworth may be a suitable breed for dual-purpose use and could be improved through selective breeding, offering potential for preservation of this local breed as well as general biodiversity in poultry farming.

Effects of a partially perforated flooring system on animal-based welfare indicators in broiler housing.

Alternative flooring designs in broiler housing have been the subject of intensive research. Research comparing different floor types with a focus on animal-based welfare indicators might be of special interest to meet the animal's needs. This case-control study investigated the effect of a partially perforated vs. a littered flooring system on health- and behavior-based welfare indicators of fast-growing Ross 308 broilers. Furthermore, production performance was assessed. The experimental barn was partially (50%) equipped with a perforated floor directly underneath the feeders and water lines accessible by perforated ramps. Conventional wood shavings were used in the control barn, as usual in practice. There were 4 fattening periods (repetitions) of 31 to 32 D performed with 500 animals per barn (final density of 39 kg m-2). Beside the flooring system, management conditions were identical. Health- and behavior-based welfare indicators were assessed weekly. Production performance indicators were measured continuously during animal control. During the avoidance distance test, animals were less fearful on day 21 (P = 0.010) and tended to be less fearful on day 28 (P = 0.083) in the barn with the partially perforated flooring system compared to the littered control barn. More animals around the novel object were also assessed in the barn with the partially perforated flooring system during the novel object test on day 1 (P < 0.001) and a tendency was found on day 28 (P = 0.064). Results showed that the partially perforated flooring system had a positive influence on foot pad dermatitis from day 14 (all P ≤ 0.007) and hock burn on day 28 (P < 0.001). With regard to the production performance, animals showed no differences in final body weight for both floor types. In this study, the partially perforated flooring system had a positive effect on animal health and behavior as indicated by welfare indicators without a reduction in production performance.

Evaluation of inner teat morphology by using high-resolution ultrasound: Changes due to milking and establishment of measurement traits of the distal teat canal.

The teat canal is important in the defense against invading pathogens, but its functional features can be impeded by the milking process. The objective of our study was to compare teat morphology before and after a standard milking procedure using high-resolution ultrasonography. Tissue changes were determined by measuring inner traits of teat morphology: teat width, teat end width, teat cistern width, diameter of the lower and upper teat wall, teat canal length, and teat canal diameter. Additionally, 3 traits describing the distal teat canal and its external orifice were established: diameter of the distal teat canal orifice, distal teat canal perimeter, and distal teat canal surface. In the first trial, we verified the repeatability of scanning over time with a mixed model. During the second trial, significant changes after milking were observed for all measured traits of teat morphology except teat end width. The traits from the distal teat canal and its orifice were remarkably changed by milking: distal teat canal orifice, +28.9%; distal teat canal perimeter, +25.0%; and distal teat canal surface, +41.5%. Comparing multiparous versus primiparous cows, higher values of teat width, teat end width, and teat canal length were observed in the older animals. Testing the effect of milk yield on teat dimensions, cows with milk yields >11.0 kg/afternoon milking were found to have larger teat widths, teat end widths, and cistern widths before attachment of the cluster. Furthermore, we observed associations of inner teat morphology toward bacterial counts in the appropriate milk. Regarding this udder health-related parameter especially, the newly established traits showed a connection. Teats in which milk showed bacterial growth had larger distal teat canal perimeters and distal teat canal surfaces. High-resolution ultrasonographic scanning of dairy teats allowed a detailed visualization of the inner morphology. The applied procedure can therefore serve as a useful tool for comparison and evaluation of different milking techniques by analyzing the resulting changes of the morphological traits. The thorough description of teat tissue can also be applied for drawing conclusions on the status of the teat canal's physical and mechanical defense function.

Effect of condensed tannins in rations of lactating dairy cows on production variables and nitrogen use efficiency.

The objective of this study was to evaluate the effect of supplemented condensed tannins (CT) from the bark of the Black Wattle tree (Acacia mearnsii) on production variables and N use efficiency in high yielding dairy cows. A feeding trial with 96 lactating German Holstein cows was conducted for a total of 169 days, divided into four periods. The animals were allotted to two groups (control (CON) and experimental (EXP) group) according to milk yield in previous lactation, days in milk (98), number of lactations and BW. The trial started and finished with a period (period 1 and 4) where both groups received the same ration (total-mixed ration based on grass and maize silage, ensiled sugar beet pulp, lucerne hay, mineral premix and concentrate, calculated for 37 kg energy-corrected milk). In between, the ration of EXP cows was supplemented with 1% (CT1, period 2) and 3% of dry matter (DM) (CT3, period 3) of a commercial A. mearnsii extract (containing 0.203 g CT/g DM) which was mixed into the concentrate. In period 3, samples of urine and faeces were collected from 10 cows of each group and analyzed to estimate N excretion. Except for a tendency for a reduced milk urea concentration with CT1, there was no difference between groups in period 2 (CON v. CT1; P>0.05). The CT3 significantly reduced (P<0.05) milk protein yield, the apparent N efficiency (kg milk N/k feed N) and milk urea concentration; but total milk yield and energy-corrected milk yield were not affected by treatment. Furthermore, as estimated from 10 cows per group and using urinary K as a marker to estimate the daily amount of urine voided, CT3 caused a minor shift of N compounds from urine to faeces, as urea-N in urine was reduced, whereas the N concentration in faeces increased. As an improvement in productivity was not achieved and N use efficiency was decreased by adding the CT product it can be concluded that under current circumstances the use in high yielding dairy cows is not advantageous.

Detection of hoof lesions using digital infrared thermography in dairy cows.

The objective was to investigate infrared thermography (IRT) as a noninvasive diagnostic tool for early detection of foot pathologies in dairy cows. This was achieved by measuring changes in coronary band temperature before and after claw trimming in response to visual detection of abnormalities of the hooves. We hypothesized that by focusing on the coronary band region, IRT is able to detect lesions of the hind limbs of dairy cows associated with lameness. In this study, 626 individual observations were collected from 24 cows before and after claw trimming. Infrared thermography was used to assess the surface temperature of the coronary band (CB) region and skin (S), and the temperature difference (ΔT) between CB and S of the hind limbs. The average, minimum, and maximum surface temperatures were recorded in both regions. Temperatures of CB and S and ΔT were significantly higher in cows ≤200 d in milk than in cows >200 d in milk for all healthy hooves: 31.8±2.7 versus 29.8±3.6; 28.5±2.5 versus 27.2±3.3°C, and 3.31±1.7 versus 2.51±1.3°C, respectively. Temperatures of CB and S regions were positively correlated with ambient temperature. This association was best described by a linear model (R(2)=0.92 and 0.99, respectively). The temperatures of CB and S regions were 30.3±3.2°C and 27.3±2.9°C; 32.1±1.7°C and 28.6±2.1°C; and 33.8±1.3°C and 29.9±1.8°C for parlor temperatures of 12.2, 15.7, and 20.3°C, respectively. In the pre- and post-trimming data analysis, a significant difference was found in temperature of the coronary band between cows with lesions and cows without lesions. A threshold value was established to determine the temperature difference between lesion and nonlesion hind claws on CB at 0.64 and 1.09°C before and after claw trimming (sensitivity=85.7%, specificity=55.9%; and sensitivity=80.0%, specificity=82.9%, respectively) with the aim of detecting hoof lesions. In conclusion, the results demonstrate an increase in surface temperature of the lame limb when a hoof has a lesion.

Development of an element-selective monitoring system for adsorbable organic halogens (AOX) with plasma emission spectrometric detection for quasi-continuous waste-water analysis.

An automated quasi-continuously-operating monitor has been developed for element-selective analysis of adsorbable organic halogens (AOX) in water. After extensive optimization the automatic method was applied to the analysis of standard solutions and real waste water samples to prove its analytical applicability. The new instrument is based on the element-selective analysis of halogens by means of a spectroscopic detection system consisting of a microwave-induced helium plasma excitation source (TM010-type; developed in this laboratory) and the plasma emission detector (PED) which operates with oscillating narrow-band interference filters. After enriching the organic components on activated charcoal and pyrolysis in an oxygen stream at 950 degrees C, in accordance with DIN/EN 38409,H14/1485, interfering CO2 and H2O gas generated during combustion is removed from the analytes in the so-called ELSA-system (element-selective AOX-analyzer). For focused injection into the plasma excitation source the analytes (hydrogen halides) are trapped in a deactivated fused silica capillary at -180 degrees C; this is followed by identification and quantification on the basis of element-specific emission of radiation in the VIS and NIR-region (chlorine 837.6 nm, fluorine 685.6 nm). Bromine and iodine could not be detected with satisfactory inter-element selectivity, because of spectral interferences caused by matrix elements, and so results from the respective single-element investigations for determination of AOBr and AOI are not presented. The procedure has been validated and the analytical performance has been examined by calibration with p-chlorophenol and p-fluorophenol. The limit of detection was 1.1 microg (absolute) for chlorine and 6.6 microg (absolute) for fluorine.

Frequency-modulated simultaneous Atomic Absorption Spectrometry (FremsAAS): Determination of As, Se and Sb.

The evaluation of accuracy and efficiency of the frequency-modulated simultaneous Atomic Absorption Spectrometry (FremsAAS) has been extended to an arrangement with EDL as light sources. Fundamental calibrations have been worked out for As, Se and Sb using a graphite furnace as well as hydride generation in combination with a heated quartz tube as atomization unit. The characteristic data are in good agreement with results obtained by conventional single-channel AAS instruments. Determinations in three standard reference materials with different complex matrices resulted in complete agreement with the certified values.

Speciation of mercury, platinum and tin - focus of research and future developments.

A discussion about the elements mercury, platinum and tin and their organometallic compounds, with special attention to important aspects like anthropogenic emissions, use in industry, agriculture and medicine, toxicities, biogeochemical cycles, highlights the necessity of speciation analysis. Methods frequently used to speciate mercury, platinum and tin compounds in different matrices are summarized. Future trends are indicated in order to give an impression about the importance of metal speciation and its increasing impact on some key disciplines.

Measuring threshold of reinforcing brain stimulation by the method of constant stimuli.

A new method for measuring threshold of reinforcing electrical brain stimulation is described and results of a parametric study using this method are presented. Two groups of rats were trained under a concurrent FR-CRF (fixed ratio-continuous reinforcement) schedule of reinforcement provided by electrical stimulation of the lateral hypothalamus. The invariant intermittent FR schedule of reinforcement was used to maintain a baseline of behavior while a superimposed concurrent CRF schedule was used to measure reinforcement magnitude by varying the intensity of the CRF stimulus between zero and a maximum. Increasing and decreasing stimulus intensity on the CRF schedule leads to a gradual disappearance, respectively reappearance, of post-reinforcement pauses (PRPs) on the concurrent FR schedule, providing a criterion for changeover in schedule control, and thus, for threshold of reinforcement. To illustrate the measurement of threshold according to psychophysical requirements of the Method of Constant Stimuli, different CRF intensities were given in a randomized order. In one group of animals FR and CRF stimuli were given through the same electrode. Another group received FR and CRF stimuli through separate electrodes implanted in different hemispheres of the brain. For both groups the duration of the PRP was used as the dependent variable. The data of both groups showed a high negative correlation between the intensity of the CRF stimulus and the duration of the PRP, which is consistent with the results of experiments in which a Method of Limits procedure was used. On the basis of this relationship between CRF current intensity and PRP duration a threshold for reinforcing brain stimulation was calculated.

Interhemispheric relationship between lateral hypothalamic self-stimulation and the region of the nucleus tegmenti pedunculo-pontinus.

Electrical self-stimulation in the lateral hypothalamus was recorded in both hemispheres of 20 rats before and after making a lesion either by unilateral radiofrequency stimulation or by injection of N-methyl-D,L-aspartate into the region of the peduncular-pontine nucleus. For the animals which received the radiofrequency lesion, a rate-intensity function was established for 3 stimulation intensities 3 days before and 5 days after the lesion. For the animals in which N-methyl-D,L-aspartate was injected, a reinforcement threshold was measured 3 days before and after the lesion using a psychophysical method-of-limits procedure. With the rate-intensity procedure a decrease in the rate of self-stimulation was observed at the highest stimulation intensity through the electrode situated contralateral to the side of the lesion. Similarly, with the reinforcement threshold method, a significant increase in threshold was found from the electrode placed in the hemisphere contralateral but not ipsilateral to the site of the lesion. These data suggest an involvement of primarily crossed pathways coursing to or from the peduncular-pontine nucleus as being involved in the control of lateral hypothalamic self-stimulation.

Lateralized functional relationship between the preoptic area and lateral hypothalamic reinforcement.

Electrical self-stimulation in the lateral hypothalamus of both hemispheres was recorded in 14 rats before and after administration of a unilateral ibotenic acid lesion of the cell bodies in the region of the lateral preoptic area. A significant decrease in the rate of self-stimulation at each of two stimulation intensities was found when the electrode was placed in the hemisphere in which the ibotenic acid lesion was made. This decrease remained constant over 21 days of testing. No changes were detected in rate of self-stimulation in the intact contralateral hemisphere. These results provide evidence for a role in lateral hypothalamic self-stimulation of intrinsic neurons located in the region of the lateral preoptic area.

Hypothalamic self-stimulation in rats with one hemisphere isolated anterior to the midbrain and the other hemisphere devoid of the telencephalon.

The telencephalon was removed unilaterally in rats. In addition, the forebrain of the other hemisphere was isolated from its brain stem by a precollicular transverse cut. This preparation was then tested for self-stimulation via electrodes implanted in the region of the lateral hypothalamus and medial forebrain bundle (LH-MFB) of either hemisphere. Self-stimulation was found to be intact in both hemispheres. Possible pathways connecting the LH-MFB region of one hemisphere to the contralateral diencephalon were also investigated in the bilaterally detelencephalized rat. The technique of retrograde transport of horseradish peroxidase was used for this purpose. Some fibers from the LH-MFB of one hemisphere were found to decussate to the other hemisphere by way of the thalamic commissure. The supraoptic decussation as well as diffusely organized interdiencephalic connections provide additional routes for interhemispheric LH-MFB projections.