Recovery of Biophenols from Olive Vegetation Waters by Carbon Nanotubes.

In this work, the possibility of using carbon nanotubes for the treatment of olive vegetation waters (OVWs) was investigated. In general, the disposal of OVWs represents an important environmental problem. The possibility of considering these waters no longer just as a problem but as a source of noble substances, thanks to the recovery of biophenols from them, was tested. In particular, predetermined quantities of olive vegetation waters were treated with carbon nanotubes. The quantities of adsorbed biophenols were studied as a function of the quantities of carbon nanotubes used and the contact time. The experimental conditions for obtaining both the highest possible quantities of biophenol and a purer adsorbate with the highest percentage of biophenols were studied. After the adsorption tests, the vegetation waters were analyzed by UV spectrophotometry to determine, in particular, the variation in the concentration of biophenols. The carbon nanotubes were weighed before and after each adsorption test. In addition, kinetic studies of the adsorption processes were considered. Carbon nanotubes proved their effectiveness in recovering biophenols.

Treatment of Water Contaminated with Reactive Black-5 Dye by Carbon Nanotubes.

Most of the dyes used today by the textile industry are of synthetic origin. These substances, many of which are highly toxic, are in many cases not adequately filtered during the processing stages, ending up in groundwater and water courses. The aim of this work was to optimize the adsorption process of carbon nanotubes to remove an azo-dye, called Reactive Black-5, from aqueous systems. Particular systems containing carbon nanotubes and dye solutions were analyzed. Furthermore, the reversibility of the process and the presence of possible degradation phenomena by the dye molecules were investigated. For this purpose, the influence of different parameters on the adsorption process, such as the nature of the carbon nanotubes (purified and nonpurified), initial concentration of the dye, stirring speed, and contact times, were studied. The solid and liquid phases after the tests were characterized by chemical-physical techniques such as thermogravimetric analysis (TG, DTA), UV spectrophotometry, BET (Brunauer, Emmett, Teller), and TOC (total organic carbon) analysis. The data obtained showed a high adsorbing capacity of carbon nanotubes in the removal of the Reactive Black-5 dye from aqueous systems. Furthermore, the efficiency of the adsorption process was observed to be influenced by the stirring speed of the samples and the contact time, while purified and nonpurified nanotubes provided substantially the same results.

Adsorption of Reactive Blue 116 Dye and Reactive Yellow 81 Dye from Aqueous Solutions by Multi-Walled Carbon Nanotubes.

The multi-walled carbon nanotubes obtained by catalytic chemical vapour deposition synthesis are used as a solid matrix for the adsorption of the Reactive Blue 116 dye and the Reactive Yellow 81 dye from aqueous solutions at different pH values. The batch tests carried out allowed us to investigate the different effects of pH (2, 4, 7, 9 and 12) and of the contact time (2.5 ÷ 240 min) used. The liquid phase was analysed using ultraviolet-visible spectrophotometry in order to characterise the adsorption kinetics, the transport mechanisms and the adsorption isotherms. The adsorption of the optimal dye was observed at pH 2 and 12. The pseudo-first order kinetic model provided the best approximation of experimental data compared to the pseudo-second order kinetic model. The predominant transport mechanism investigated with the Weber and Morris method was molecular diffusion for both Reactive Yellow 81 and Reactive Blue 116, and the equilibrium data were better adapted to the Langmuir isothermal model. The maximum adsorption capacity for Reactive Yellow 81 and Reactive Blue 116 occurred with values of 33.859 mg g-1 and 32.968 mg g-1, respectively.

Removal of unleaded gasoline from water by multi-walled carbon nanotubes.

This article displays an efficient and cost effective technique for the removal of unleaded gasoline from water. Multi-walled carbon nanotubes (MWCNTs) were used as the sorbent material. Nanotubes were synthesized according to a well-known procedure and successfully used avoiding cumbersome purifications from traces of catalyst. A series of lab-scale experiments was performed on dispersions of commercial unleaded gasoline (20 mL) in water (30 mL), which were subjected to the action of variable amounts of MWCNTs at room temperature. Physicochemical characteristics and sorbent capacity of nanotubes were investigated by thermal analysis and FT-IR spectroscopy. The highest percentage of removed unleaded gasoline was obtained using small amounts (0.7 g) of MWCNTs, over very short stirring times (5 min). The composition of residual organic materials in water was investigated by 1H and 13C high-resolution NMR spectroscopy, which confirmed the almost complete removal of unleaded gasoline hydrocarbon components from polluted waters.

Industrial Waste Treatment by ETS-10 Ion Exchanger Material.

The aim of this project was to study the treatment of industrial waste using ETS-10 zeolite. The pollutants that must be removed were metals sourced from zinc ferrite, a processing waste derived from the use of mineral-containing zinc. The first phase of the work involved the characterization of the industrial waste, zinc ferrite, in order to deepen the knowledge regarding its nature and composition. The second phase involved the removal of the metals released by the zinc ferrite in aqueous systems using the ETS-10 phase as an ion exchanger. Different chemical and physical techniques were used: plasma mass spectrometry, X-ray diffraction, scanning electron microscopy, microanalysis, and thermal analyses. A comparison between ETS-10 and commercial zeolite A performance, in the same aqueous systems, was carried out. The results showed that the metal removal efficiency of ETS-10 phase is higher than that obtained by commercial zeolite A, especially towards dangerous heavy metals such as Pb, Zn and Mn.