Limb Reconstruction After Premature Growth Arrest Secondary to Bone Infections.

During recent years, the detection of osteoarticular infections has increased, thanks to improvement and wide availability of diagnostic tools. Despite that, surgeons and patients still have to deal with long-term sequelae, including osteoarthritis, chronic osteomyelitis, and premature physeal arrest. Subsequent joint reconstruction is the most difficult challenge when the hip or knee has been affected. Most surgical procedures described to manage these devastating consequences are only palliative, with the goal focused on improving stability and pain control, but seldom ending with a highly functional joint. Premature physeal arrest has an unpredictable course after an osteoarticular infection. The prognosis depends on the age of the child, the type of injury (partial or total bony bar), the proportion of the physeal surface affected, and the bone compromised. Peripheral injuries lead to angular limb deformities, whereas central bars lead to limb-length discrepancies. Surgical treatment should be oriented to preserve physeal function and allow normal growth to resume. In those cases where preserving physeal function is not possible, the orthopaedic surgeon must deal with the sequelae of limb-length discrepancies and/or bone deformities.

Problemas rotacionales de las extremidades inferiores en niños y adolescentes / Rotational problems of lower limbs in children and adolescents

Las deformidades torsionales de las extremidades inferiores corresponden a una de las causas de visita más frecuente al ortopedista infantil. En la mayoría de los casos, estas consultas son innecesarias, pues se trata de condiciones normales del esqueleto en desarrollo, que suelen corregir espontáneamente. El médico no especialista debe estar familiarizado con los cambios fisiológicos que ocurren en las extremidades inferiores del niño, de manera de identificar aquellos casos severos o aquellos que producen alteraciones funcionales.Estas deformidades, pueden ocurrir en cualquier nivel, desde la pelvis a los pies, por lo que un examen físico sistemático permitirá identificar la causa y proponer un tratamiento de acuerdo a los hallazgos. El único tratamiento eficaz, cuando la situación lo requiere, es la cirugía ortopédica. El uso de plantillas, calzado ortopédico y órtesis no cumplen ninguna función en el manejo de estas alteraciones

Torsional deformities of lower limbs are one of the most frequent causes to visit a pediatric orthopedic surgeon. In most cases, these are unnecessary, as they represent a normal stage of the developing skeleton, which usually correct spontaneously. The nonspecialist physician must be familiar with the physiological changes that occur in children's lower limb, in order to identify those cases that are severe, or cause functional disabilities.These deformities can occur at any level, from the pelvis to the feet, so a systematic physical examination will allow the cause to be identified and treated to be proposed according on to the findings. The only effective treatment, when the situation requires it, is orthopedic surgery. The use of insoles, orthopedic footwear, and orthoses have no role in the management of these alterations

Use of Three-dimensional Printing in Orthopaedic Surgical Planning.

BACKGROUND: Three-dimensional (3D) printing is a technique based on overlapping layers of a material (eg, plastic, clay, and metal). The widespread implementation of 3D printers has resulted in a notable increase in use. Fields such as construction, engineering, and medicine benefit from this technique. AIM: The use of 3D printed scale models permits better surgical planning and results. METHODS: The models were created based on CT images of seven patients (age range, 5 to 61 years) with different pathologies who were candidates for surgery. RESULTS: Surgical time decreased as a result of detailed surgical planning with printed models. This technique also was associated with a decrease in bleeding, a reduction in the amount of anesthesia required, and greater precision. In some patients, a change in surgical strategy was noted, thus allowing for a reduction in the number of surgeries and the aggressiveness of surgery. Finally, the preoperative practice (virtual and physical osteotomies using cutting tools) that was performed in two cases allowed the surgeon to evaluate the different approach alternatives and establish the best strategy. CONCLUSIONS: The use of 3D-printed anatomic models has improved surgical planning, especially for patients in whom the conventional techniques are insufficient for establishing a proper strategy. The extra information provided by 3D-printed models can lead to a better intervention strategy, which is beneficial for patients because it decreases the risks, procedure times, and recovery times.

Assessment of femoral physeal activity after transitory hemiepiphysiodesis using screws and nonabsorbable filament.

BACKGROUND: Different techniques for gradual correction of angular deformities of lower limbs exist. Long-term behavior of the growth plate after hemiepiphysiodesis is not yet well understood. We assessed the restoration of normal physeal activity in New Zealand rabbits, after transitory hemiepiphysiodesis, using screws and nonabsorbable filament. METHODS: We performed a lateral distal femoral epiphysiodesis using nonabsorbable filament and screws, in the right knees of 14 New Zealand male rabbits, aged 11 weeks. Two groups were created: in group 1, the suture was cut after 1 month, and in group 2 it was left uncut. Simple plain radiographs were taken at the beginning and at 4, 8, and 12 weeks of follow-up to evaluate lower limb deformity rate and femoral length. The left knee of each rabbit served as controls. Angular deformity and femoral length were compared between the groups. RESULTS: Eleven rabbits completed the protocol. The control group had no modification in lower limb mechanical axis. On the fourth week, all operated limbs had a significant valgus tibiofemoral angle variation (mean 24 degrees, P<0.05). When the filament was cut, there was complete restoration of the mechanical axis. When the filament was kept, tibiofemoral angle increased its valgus deformity until the eighth week (mean 32 degrees) without changes thereafter. The final femoral length was shorter in group 2 compared with the other 2 groups (P<0.05), whereas group 1 was slightly longer than the control group (P>0.05). CONCLUSIONS: Lateral distal femoral hemiepiphysiodesis with nonabsorbable filament resulted in a valgus deformity on the femur. Once the filament is cut, the femur can restore its normal alignment, while maintaining longitudinal growth. Keeping the physeal tether increases the valgus achieved during the first 8 weeks, and remained stable throughout the study, shortening the bone. CLINICAL RELEVANCE: This is an effective alternative for the correction of angular limb deformities that maintains physeal function and may be useful for orthopedic surgeons. It could also represent an adequate model for the study of rebound effect.

Single time angular deformity correction and treatment of knee instability in congenital fibular hemimelia. A case report.

BACKGROUND: Fibular hemimelia is the most frequently occurring congenital anomaly of long bones. These patients, among other deficiencies, have a poor development of the anterior cruciate ligament (ACL). Unless it causes clinically assessed instability of the knee, nonsurgical treatment is given. When surgical treatment is required, correction of angular limb deformity must be realized prior to ACL reconstruction. METHODS: We present the case of a 16-year old patient with congenital fibular hemimelia. Physical examination showed genu valgum, anteromedial rotatory instability and recurvatum of the right knee. We decided to perform surgical correction of the angular deformities and ACL reconstruction in the same surgical time. RESULTS: Twelve months after surgery, the patient had no evidence of clinical instability, with a range of motion from -5°-110° of the right knee. No claudication or gait instability was found. The KT-1000 arthrometer showed a difference of 2mm between both knees. CONCLUSION: The ACL reconstruction and corrective osteotomies of angular deformities performed in a single surgical procedure had a good clinical result in a 12 month follow up-period, restoring stability of the knee and allowing a normal gait cycle.

Arthroscopic fixation of displaced tibial eminence fractures: a new growth plate-sparing method.

PURPOSE: Fractures of the tibial eminence can be treated arthroscopically. Numerous ways to attach an anterior cruciate ligament avulsion from the tibial eminence have been designed. This report describes a new physis-sparing reduction and fixation technique using an anchor passing nonabsorbable braided sutures through the substance of the anterior cruciate ligament, holding the avulsed bone fragment by tying a locking knot. This study was performed to evaluate a consecutive group of patients who underwent reduction and fixation of tibial avulsion fractures fixed with an anchor with sutures. METHODS: The evaluation was performed by use of objective and subjective International Knee Documentation Committee (IKDC) scores, KT-1000 measurement (MEDmetric, San Diego, CA), Lachman and pivot-shift tests, and Lysholm score. RESULTS: The global IKDC objective score was normal (A) in 4 knees and nearly normal (B) in 3, without extension or flexion limitations. The mean IKDC subjective score was 92 out of 100 (range, 86 to 98). The results of the anterior drawer, Lachman, and pivot-shift tests were negative. The mean Lysholm score improved from 29 to 94. The mean side-to-side difference in anterior tibial translation was 2 mm (range, 1 to 3 mm). CONCLUSIONS: Arthroscopic stabilization by use of an anchor with sutures was possible in all cases of tibial spine fracture. We were able to obtain excellent results in this series using this fixation method. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Late developmental dislocation of the hip after initial normal evaluation: a report of five cases.

Developmental dysplasia of the hip (DDH) denotes a wide spectrum of pathologies ranging from hip instability to frank dislocation. The current understanding is that cases of late diagnosis were missed during the newborn period. However, there is some evidence that a number of hip subluxations or dislocations may have been clinically stable in the neonatal period, but dislocate late. We present 5 cases of otherwise healthy children with normal physical examinations and hip radiographs in the first 3 months of life who later developed hip dislocations. Four of the 5 cases required surgical open reduction. In light of these cases and others in the literature, normal neonatal screening for DDH does not assure that continued normal development of the hip joint will happen. Our study confirms the existence of another entity in the wide spectrum of DDH: the late hip dislocation. Therefore, hip evaluations should be continued beyond the neonatal period until the child begins to walk. Parents should be informed that hip dislocation can occur in a late form, and they should be encouraged to take their children for repeated evaluations even if the neonatal screening is normal.