Mapping the interactions of the single-stranded DNA binding protein of bacteriophage T4 (gp32) with DNA lattices at single nucleotide resolution: gp32 monomer binding.

Combining biophysical measurements on T4 bacteriophage replication complexes with detailed structural information can illuminate the molecular mechanisms of these 'macromolecular machines'. Here we use the low energy circular dichroism (CD) and fluorescent properties of site-specifically introduced base analogues to map and quantify the equilibrium binding interactions of short (8 nts) ssDNA oligomers with gp32 monomers at single nucleotide resolution. We show that single gp32 molecules interact most directly and specifically near the 3'-end of these ssDNA oligomers, thus defining the polarity of gp32 binding with respect to the ssDNA lattice, and that only 2-3 nts are directly involved in this tight binding interaction. The loss of exciton coupling in the CD spectra of dimer 2-AP (2-aminopurine) probes at various positions in the ssDNA constructs, together with increases in fluorescence intensity, suggest that gp32 binding directly extends the sugar-phosphate backbone of this ssDNA oligomer, particularly at the 3'-end and facilitates base unstacking along the entire 8-mer lattice. These results provide a model (and 'DNA map') for the isolated gp32 binding to ssDNA targets, which serves as the nucleation step for the cooperative binding that occurs at transiently exposed ssDNA sequences within the functioning T4 DNA replication complex.

Mapping the interactions of the single-stranded DNA binding protein of bacteriophage T4 (gp32) with DNA lattices at single nucleotide resolution: polynucleotide binding and cooperativity.

We here use our site-specific base analog mapping approach to study the interactions and binding equilibria of cooperatively-bound clusters of the single-stranded DNA binding protein (gp32) of the T4 DNA replication complex with longer ssDNA (and dsDNA) lattices. We show that in cooperatively bound clusters the binding free energy appears to be equi-partitioned between the gp32 monomers of the cluster, so that all bind to the ssDNA lattice with comparable affinity, but also that the outer domains of the gp32 monomers at the ends of the cluster can fluctuate on and off the lattice and that the clusters of gp32 monomers can slide along the ssDNA. We also show that at very low binding densities gp32 monomers bind to the ssDNA lattice at random, but that cooperatively bound gp32 clusters bind preferentially at the 5'-end of the ssDNA lattice. We use these results and the gp32 monomer-binding results of the companion paper to propose a detailed model for how gp32 might bind to and interact with ssDNA lattices in its various binding modes, and also consider how these clusters might interact with other components of the T4 DNA replication complex.

Lessons from the lysozyme of phage T4.

An overview is presented of some of the major insights that have come from studies of the structure, stability, and folding of T4 phage lysozyme. A major purpose of this review is to provide the reader with a complete tabulation of all of the variants that have been characterized, including melting temperatures, crystallographic data, Protein Data Bank access codes, and references to the original literature. The greatest increase in melting temperature (T(m)) for any point mutant is 5.1 degrees C for the mutant Ser 117 --> Val. This is achieved in part not only by hydrophobic stabilization but also by eliminating an unusually short hydrogen bond of 2.48 A that apparently has an unfavorable van der Waals contact. Increases in T(m) of more than 3-4 degrees C for point mutants are rare, whereas several different types of destabilizing substitutions decrease T(m) by 20 degrees C or thereabouts. The energetic cost of cavity creation and its relation to the hydrophobic effect, derived from early studies of "large-to-small" mutants in the core of T4 lysozyme, has recently been strongly supported by related studies of the intrinsic membrane protein bacteriorhodopsin. The L99A cavity in the C-terminal domain of the protein, which readily binds benzene and many other ligands, has been the subject of extensive study. Crystallographic evidence, together with recent NMR analysis, suggest that these ligands are admitted by a conformational change involving Helix F and its neighbors. A total of 43 nonisomorphous crystal forms of different monomeric lysozyme mutants were obtained plus three more for synthetically-engineered dimers. Among the 43 space groups, P2(1)2(1)2(1) and P2(1) were observed most frequently, consistent with the prediction of Wukovitz and Yeates.

Use of stabilizing mutations to engineer a charged group within a ligand-binding hydrophobic cavity in T4 lysozyme.

Both large-to-small and nonpolar-to-polar mutations in the hydrophobic core of T4 lysozyme cause significant loss in stability. By including supplementary stabilizing mutations we constructed a variant that combines the cavity-creating substitution Leu99 --> Ala with the buried charge mutant Met102 --> Glu. Crystal structure determination confirmed that this variant has a large cavity with the side chain of Glu102 located within the cavity wall. The cavity includes a large disk-shaped region plus a bulge. The disk-like region is essentially nonpolar, similar to L99A, while the Glu102 substituent is located in the vicinity of the bulge. Three ordered water molecules bind within this part of the cavity and appear to stabilize the conformation of Glu102. Glu102 has an estimated pKa of about 5.5-6.5, suggesting that it is at least partially charged in the crystal structure. The polar ligands pyridine, phenol and aniline bind within the cavity, and crystal structures of the complexes show one or two water molecules to be retained. Nonpolar ligands of appropriate shape can also bind in the cavity and in some cases exclude all three water molecules. This disrupts the hydrogen-bond network and causes the Glu102 side chain to move away from the ligand by up to 0.8 A where it remains buried in a completely nonpolar environment. Isothermal titration calorimetry revealed that the binding of these compounds stabilizes the protein by 4-6 kcal/mol. For both polar and nonpolar ligands the binding is enthalpically driven. Large negative changes in entropy adversely balance the binding of the polar ligands, whereas entropy has little effect on the nonpolar ligand binding.

Contributions of all 20 amino acids at site 96 to the stability and structure of T4 lysozyme.

To try to resolve the loss of stability in the temperature-sensitive mutant of T4 lysozyme, Arg 96 --> His, all of the remaining 18 naturally occurring amino acids were substituted at site 96. Also, in response to suggestions that the charged residues Lys85 and Asp89, which are 5-8 A away, may have important effects, each of these amino acids was replaced with alanine. Crystal structures were determined for many of the variants. With the exception of the tryptophan and valine mutants R96W and R96V, the crystallographic analysis shows that the substituted side chain following the path of Arg96 in wildtype (WT). The melting temperatures of the variants decrease by up to approximately 16 degrees C with WT being most stable. There are two site 96 replacements, with lysine or glutamine, that leave the stability close to that of WT. The only element that the side chains of these residues have in common with the WT arginine is the set of three carbon atoms at the C(alpha), C(beta), and C(gamma) positions. Although each side chain is long and flexible with a polar group at the distal position, the details of the hydrogen bonding to the rest of the protein differ in each case. Also, the glutamine replacement lacks a positive charge. This shows that there is some adaptability in achieving full stabilization at this site. At the other extreme, to be maximally destabilizing a mutation at site 96 must not only eliminate favorable interactions but also introduce an unfavorable element such as steric strain or a hydrogen-bonding group that remains unsatisfied. Overall, the study highlights the essential need for atomic resolution site-specific structural information to understand and to predict the stability of mutant proteins. It can be very misleading to simply assume that conservative amino acid substitutions cause small changes in stability, whereas large stability changes are associated with nonconservative replacements.

DNA models of trinucleotide frameshift deletions: the formation of loops and bulges at the primer-template junction.

Although mechanisms of single-nucleotide residue deletion have been investigated, processes involved in the loss of longer nucleotide sequences during DNA replication are poorly understood. Previous reports have shown that in vitro replication of a 3'-TGC TGC template sequence can result in the deletion of one 3'-TGC. We have used low-energy circular dichroism (CD) and fluorescence spectroscopy to investigate the conformations and stabilities of DNA models of the replication intermediates that may be implicated in this frameshift. Pyrrolocytosine or 2-aminopurine residues, site-specifically substituted for cytosine or adenine in the vicinity of extruded base sequences, were used as spectroscopic probes to examine local DNA conformations. An equilibrium mixture of four hybridization conformations was observed when template bases looped-out as a bulge, i.e. a structure flanked on both sides by duplex DNA. In contrast, a single-loop structure with an unusual unstacked DNA conformation at its downstream edge was observed when the extruded bases were positioned at the primer-template junction, showing that misalignments can be modified by neighboring DNA secondary structure. These results must be taken into account in considering the genetic and biochemical mechanisms of frameshift mutagenesis in polymerase-driven DNA replication.

Halogenated benzenes bound within a non-polar cavity in T4 lysozyme provide examples of I...S and I...Se halogen-bonding.

We showed earlier that the mutation of Leu99 to alanine in bacteriophage T4 lysozyme creates an internal cavity of volume approximately 150 A(3) that binds benzene and a variety of other ligands. As such, this cavity provides an excellent target to study protein-ligand interaction. Here, we use low-temperature crystallography and related techniques to analyze the binding of halogen-incorporated benzenes typified by C(6)F(5)X, where X=H, F, Cl, Br or I, and C(6)H(5)X, where X=H or I was also studied. Because of the increased electron density of fluorine relative to hydrogen, the geometry of binding of the fluoro compounds can often be determined more precisely than their hydrogen-containing analogs. All of the ligands bind in essentially the same plane but the center of the phenyl ring can translate by up to 1.2 A. In no case does the ligand rotate freely within the cavity. The walls of the cavity consist predominantly of hydrocarbon atoms, and in several cases it appears that van der Waals interactions define the geometry of binding. In comparing the smallest with the largest ligand, the cavity volume increases from 181 A(3) to 245 A(3). This shows that the protein is flexible and adapts to the size and shape of the ligand. There is a remarkably close contact of 3.0 A between the iodine atom on C(6)F(5)I and the sulfur or selenium atom of Met or SeMet102. This interaction is 1.0 A less than the sum of the van der Waals radii and is a clear example of a so-called halogen bond. Notwithstanding this close approach, the increase in binding energy for the halogen bond relative to a van der Waals contact is estimated to be only about 0.5-0.7 kcal/mol.

Structural and thermodynamic characterization of T4 lysozyme mutants and the contribution of internal cavities to pressure denaturation.

Using small-angle X-ray scattering (SAXS) and tryptophan fluorescence spectroscopy, we have identified multiple compact denatured states of a series of T4 lysozyme mutants that are stabilized by high pressures. Recent studies imply that the mechanism of pressure denaturation is the penetration of water into the protein rather than the transfer of hydrophobic residues into water. To investigate water penetration and the volume change associated with pressure denaturation, we studied the solution behavior of four T4 lysozyme mutants having different cavity volumes at low and neutral pH up to a pressure of 400 MPa (0.1 MPa = 0.9869 atm). At low pH, L99A T4 lysozyme expanded from a compact folded state to a partially unfolded state with a corresponding change in radius of gyration from 17 to 32 A. The volume change upon denaturation correlated well with the total cavity volume, indicating that all of the molecule's major cavities are hydrated with pressure. As a direct comparison to high-pressure crystal structures of L99A T4 lysozyme solved at neutral pH [Collins, M. D., Hummer, G., Quillin, M. L., Matthews, B. W., and Gruner, S. M. (2005) Proc. Natl. Acad. Sci. U.S.A. 102, 16668-16671], pressure denaturation of L99A and the structurally similar L99G/E108V mutant was studied at neutral pH. The pressure-denatured state at neutral pH is even more compact than at low pH, and the small volume changes associated with denaturation suggest that the preferential filling of large cavities is responsible for the compactness of the pressure-denatured state. These results confirm that pressure denaturation is characteristically distinct from thermal or chemical denaturation.

Guanidinium derivatives bind preferentially and trigger long-distance conformational changes in an engineered T4 lysozyme.

The binding of guanidinium ion has been shown to promote a large-scale translation of a tandemly duplicated helix in an engineered mutant of T4 lysozyme. The guanidinium ion acts as a surrogate for the guanidino group of an arginine side chain. Here we determine whether methyl- and ethylguanidinium provide better mimics. The results show that addition of the hydrophobic moieties to the ligand enhances the binding affinity concomitant with reduction in ligand solubility. Crystallographic analysis confirms that binding of the alternative ligands to the engineered site still drives the large-scale conformational change. Thermal analysis and NMR data show, in comparison to guanidinium, an increase in protein stability and in ligand affinity. This is presumably due to the successive increase in hydrophobicity in going from guanidinium to ethylguanidinium. A fluorescence-based optical method was developed to sense the ligand-triggered helix translation in solution. The results are a first step in the de novo design of a molecular switch that is not related to the normal function of the protein.

Sequential reorganization of beta-sheet topology by insertion of a single strand.

Insertions, duplications, and deletions of sequence segments are thought to be major evolutionary mechanisms that increase the structural and functional diversity of proteins. Alternative splicing, for example, is an intracellular editing mechanism that is thought to generate isoforms for 30%-50% of all human genes. Whereas the inserted sequences usually display only minor structural rearrangements at the insertion site, recent observations indicate that they may also cause more dramatic structural displacements of adjacent structures. In the present study we test how artificially inserted sequences change the structure of the beta-sheet region in T4 lysozyme. Copies of two different beta-strands were inserted into two different loops of the beta-sheet, and the structures were determined. Not surprisingly, one insert "loops out" at its insertion site and forms a new small beta-hairpin structure. Unexpectedly, however, the second insertion leads to displacement of adjacent strands and a sequential reorganization of the beta-sheet topology. Even though the insertions were performed at two different sites, looping out occurred at the C-terminal end of the same beta-strand. Reasons as to why a non-native sequence would be recruited to replace that which occurs in the native protein are discussed. Our results illustrate how sequence insertions can facilitate protein evolution through both local and nonlocal changes in structure.

Low energy CD of RNA hairpin unveils a loop conformation required for lambdaN antitermination activity.

N protein coded by phage lambda is a transcription factor that stimulates the antitermination activity of Escherichia coli RNA polymerase by binding specifically to the nascent RNA transcript at a stemloop structure called boxB. We use a new biophysical technique, involving the monitoring of the low energy circular dichroism spectra of 2-aminopurine residues site-specifically placed in the boxB RNA loop, to investigate this binding interaction. The low energy CD spectra of these 2-aminopurine probes reflect specific asymmetric interactions with adjacent nucleotide bases. Consequently, these CD spectra provide detailed and specific conformational information about the RNA chain at these chromophores that cannot be obtained from changes in the related fluorescence signals of these probes. CD changes were observed on binding the N peptide to boxB RNA that correspond to structural changes that had been previously seen by NMR, thus validating our experimental approach. The low energy CD method was then used to quantify the ordered and disordered states of the free hairpin loop and to show that a significant fraction of the boxB loop assumes a product-like structure in the absence of protein. A boxB derivative with an intact stem and a reduced concentration of ordered loop was identified and used to show that the extent of the reaction between protein and boxB depends on the concentration of structured loop in the RNA reactant population. This result has general implications for the conformational specificity of RNA-protein interactions.

Investigating local conformations of double-stranded DNA by low-energy circular dichroism of pyrrolo-cytosine.

Local base stacking and conformational mobility play a major role in the structure and function of nucleic acids. We have recently shown that the low-energy CD spectrum of 2-aminopurine (2-AP), i.e., the CD spectral region above 300 nm, can be used to monitor conformational changes in polynucleotides at or near mono- and dinucleotide 2-AP residues that replace adenine residues in DNA and RNA. Here, we extend this technique to pyrrolo-cytosine (PC), a fluorescent analogue of cytosine. The low-energy CD spectrum of a PC dinucleotide in dsDNA exhibits an exciton couplet with two bands of opposite sign centered at 350 nm. This signal is characteristic of base stacking between adjacent PC residues in a right helical conformation. Isolated PC nucleotide residues inserted into polynucleotide chains also display chirality that reflects the asymmetric environment of their sequence context. Thus, we show that the low-energy CD spectra of C(PC)A and A(PC)C sequences in dsDNA have opposite signs. It appears that the measurement of the low-energy CD spectra of PC residues will usefully complement 2-AP measurements by serving to characterize the local conformations and dynamics of nucleic acids near C residues and G-C base pairs.

Alanine-scanning mutagenesis of the beta-sheet region of phage T4 lysozyme suggests that tertiary context has a dominant effect on beta-sheet formation.

In general, alpha-helical conformations in proteins depend in large part on the amino acid residues within the helix and their proximal interactions. For example, an alanine residue has a high propensity to adopt an alpha-helical conformation, whereas that of a glycine residue is low. The sequence preferences for beta-sheet formation are less obvious. To identify the factors that influence beta-sheet conformation, a series of scanning polyalanine mutations were made within the strands and associated turns of the beta-sheet region in T4 lysozyme. For each construct the stability of the folded protein was reduced substantially, consistent with removal of native packing interactions. However, the crystal structures showed that each of the mutants retained the beta-sheet conformation. These results suggest that the structure of the beta-sheet region of T4 lysozyme is maintained to a substantial extent by tertiary interactions with the surrounding parts of the protein. Such tertiary interactions may be important in determining the structures of beta-sheets in general.

Use of sequence duplication to engineer a ligand-triggered, long-distance molecular switch in T4 lysozyme.

We have designed a molecular switch in a T4 lysozyme construct that controls a large-scale translation of a duplicated helix. As shown by crystal structures of the construct with the switch on and off, the conformational change is triggered by the binding of a ligand (guanidinium ion) to a site that in the wild-type protein was occupied by the guanidino head group of an Arg. In the design template, a duplicated helix is flanked by two loop regions of different stabilities. In the "on" state, the N-terminal loop is weakly structured, whereas the C-terminal loop has a well defined conformation that is stabilized by means of nonbonded interactions with the Arg head group. The truncation of the Arg to Ala destabilizes this loop and switches the protein to the "off" state, in which the duplicated helix is translocated approximately 20 A. Guanidinium binding restores the key interactions, restabilizes the C-terminal loop, and restores the "on" state. Thus, the presence of an external ligand, which is unrelated to the catalytic activity of the enzyme, triggers the inserted helix to translate 20 A away from the binding site. The results illustrate a proposed mechanism for protein evolution in which sequence duplication followed by point mutation can lead to the establishment of new function.

Characterization of nucleocapsid binding by the measles virus and mumps virus phosphoproteins.

We report an analysis of the interaction between the P protein and the RNA-associated N protein (N-RNA) for both measles and mumps viruses with proteins produced in a bacterial expression system. During this study, we verified that the C-terminal tail of the N protein is not required for nucleocapsid formation. For both measles and mumps virus N, truncated proteins encompassing amino acids 1 to 375 assemble into nucleocapsid-like particles within the bacterial cell. For measles virus N, the binding site for the P protein maps to residues 477 to 505 within the tail of the molecule, a sequence relatively conserved among the morbilliviruses. For mumps virus N, a binding site for the P protein maps to the assembly domain of N (residues 1 to 398), while no strong binding of the P protein to the tail of N was detected. These results suggest that the site of attachment for the polymerase varies among the paramyxoviruses. Pulldown experiments demonstrate that the last 50 amino acids of both measles virus and mumps virus P (measles virus P, 457 to 507; mumps virus P, 343 to 391) by themselves constitute the nucleocapsid-binding domain (NBD). Spectroscopic studies show that the NBD is predominantly alpha-helical in both viruses. However, only in measles virus P is the NBD stable and folded, having a lesser degree of tertiary organization in mumps virus P. With isothermal titration calorimetry, we demonstrate that the measles virus P NBD binds to residues 477 to 505 of measles virus N with 1:1 stoichiometry. The dissociation constant (K(d)) was determined to be 13 microM at 20 degrees C and 35 microM at 37 degrees C. Our data are consistent with a model in which an alpha-helical nucleocapsid binding domain, located at the C terminus of P, is responsible for tethering the viral polymerase to its template yet also suggest that, in detail, polymerase binding in morbilliviruses and rubulaviruses differs significantly.

Low-energy circular dichroism of 2-aminopurine dinucleotide as a probe of local conformation of DNA and RNA.

Circular dichroism is commonly used to investigate the conformations of nucleic acids. However, many biochemical processes implicate conformational changes of particular nucleotide residues within DNA or RNA that cannot be studied by this method, because the CD of these residues is buried in the total signal of the polynucleotide. Here, we report a method to study local conformations of DNA or RNA that is based on the use of the CD of 2-aminopurine (AP) residues as a probe. AP is readily incorporated into DNA in place of adenine and does not significantly alter DNA structure. Unlike adenine, AP is fluorescent and this property has been used for many years to investigate local nucleic acid structure. We show here that the CD spectrum of AP dinucleotide, (AP)(2), exhibits a positive CD band at 326 nm, a spectral region in which nucleic acids (and proteins) do not absorb. Our results show that the bases of (AP)(2) are stacked in a right-handed helical conformation. A low-energy CD band is also observed when this nucleotide dimer is incorporated into double-stranded DNA. Control experiments show that this signal comes from the stacking of adjacent AP residues. We have used this CD signal to provide information about the conformation of the AP dinucleotide at a defined position within single- and double-stranded nucleic acids.

Relocation or duplication of the helix A sequence of T4 lysozyme causes only modest changes in structure but can increase or decrease the rate of folding.

In T4 lysozyme, helix A is located at the amino terminus of the sequence but is associated with the C-terminal domain in the folded structure. To investigate the implications of this arrangement for the folding of the protein, we first created a circularly permuted variant with a new amino terminus at residue 12. In effect, this moves the sequence corresponding to helix A from the N- to the C-terminus of the molecule. The protein crystallized nonisomorphously with the wild type but has a very similar structure, showing that the unit consisting of helix A and the C-terminal domain can be reconstituted from a contiguous polypeptide chain. The protein is less stable than the wild type but folds slightly faster. We then produced a second variant in which the helix A sequence was appended at the C-terminus (as in the first variant), but was also restored at the N-terminus (as in the wild type). This variant has two helix A sequences, one at the N-terminus and the other at the C-terminus, each of which can compete for the same site in the folded protein. The crystal structure shows that it is the N-terminal sequence that folds in a manner similar to that of the wild type, whereas the copy at the C-terminus is forced to loop out. The stability of this protein is much closer to that of the wild type, but its rate of folding is significantly slower. The reduction in rate is attributed to the presence of the two identical sequence segments which compete for a single, mutually exclusive, site.

Repacking the Core of T4 lysozyme by automated design.

Automated protein redesign, as implemented in the program ORBIT, was used to redesign the core of phage T4 lysozyme. A total of 26 buried or partially buried sites in the C-terminal domain were allowed to vary both their sequence and side-chain conformation while the backbone and non-selected side-chains remained fixed. A variant with seven substitutions ("Core-7") was identified as having the most favorable energy. The redesign experiment was repeated with a penalty for the presence of methionine residues. In this case the redesigned protein ("Core-10") had ten amino acid changes. The two designed proteins, as well as the constituent single mutants, and several single-site revertants were over-expressed in Escherichia coli, purified, and subjected to crystallographic and thermal analyses. The thermodynamic and structural data show that some repacking was achieved although neither redesigned protein was more stable than the wild-type protein. The use of the methionine penalty was shown to be effective. Several of the side-chain rotamers in the predicted structure of Core-10 differ from those observed. Rather than changing to new rotamers predicted by the design process, side-chains tend to maintain conformations similar to those seen in the native molecule. In contrast, parts of the backbone change by up to 2.8A relative to both the designed structure and wild-type. Water molecules that are present within the lysozyme molecule were removed during the design process. In the redesigned protein the resultant cavities were, to some degree, re-occupied by side-chain atoms. In the observed structure, however, water molecules were still bound at or near their original sites. This suggests that it may be preferable to leave such water molecules in place during the design procedure. The results emphasize the specificity of the packing that occurs within the core of a typical protein. While point substitutions within the core are tolerated they almost always result in a loss of stability. Likewise, combinations of substitutions may also be tolerated but usually destabilize the protein. Experience with T4 lysozyme suggests that a general core repacking methodology with retention or enhancement of stability may be difficult to achieve without provision for shifts in the backbone.

Multiple methionine substitutions are tolerated in T4 lysozyme and have coupled effects on folding and stability.

In order to further explore the tolerance of proteins to amino acid substitutions within the interior, a series of core residues was replaced by methionine within the C-terminal domain of T4 lysozyme. By replacing leucine, isoleucine, valine and phenylalanine residues a total of 10 methionines could be introduced, which corresponds to a third of the residues that are buried in this domain. As more methionines are incorporated the protein gradually loses stability. This is attributed in part to a reduction in hydrophobic stabilization, in part to the increased entropic cost of localizing the long, flexible methionine sidechains, and in part to steric clashes. The changes in structure of the mutants relative to the wildtype protein are modest but tend to increase in an additive fashion as more methionines are included. In the most extreme case, namely the 10-methionine mutant, much of the C-terminal domain remains quite similar to wildtype (root-mean-square backbone shifts of 0.56 A), while the F and G helices undergo rotations of approximately 20 degrees and center-of-mass shifts of approximately 1.4 A. For up to six methionine substitutions the changes in stability are additive. Beyond this point, however, the multiple mutants are somewhat more stable than suggested from the sum of their constituents, especially for those including the replacement Val111-->Met. This is interpreted in terms of the larger structural changes associated with this substitution. The substituted sidechains in the mutant structures have somewhat higher crystallographic thermal factors than their counterparts in WT*. Nevertheless, the interiors of the mutant proteins retain a well-defined structure with little suggestion of molten-globule characteristics. Lysozymes in which selenomethionine has been incorporated rather than methionine tend to have increased stability. At the same time they also fold faster. This provides further evidence that, at the rate-limiting step in folding, the structure of the C-terminal domain of T4 lysozyme is similar to that of the fully folded protein.

A helix initiation signal in T4 lysozyme identified by polyalanine mutagenesis.

To better understand the relation between sequence and structure, and in an attempt to simplify the protein folding problem, a series of alanine substitutions was introduced into bacteriophage T4 lysozyme. In contrast to previous studies in this system, which were restricted to single alpha-helices, the present analysis included a helix-turn-helix region, a loop-helix region, and two alpha-helices that were well separated in the three-dimensional structure. It was shown previously that T4 lysozyme is very tolerant of alanine substitutions within alpha-helices, especially at solvent-exposed sites. The present study shows that the protein is also tolerant of such substitutions in turn and loop regions, although less than in helices. The results confirm that the structural information in the amino acid sequence is highly redundant. For example, the protein with the sequence 127AAAAAALAAAAWAAA141 folds normally, has melting temperature only 0.8 degrees C lower than wildtype, and has a crystal structure that is also very similar to wildtype. Polyalanine substitutions within turns or loops can, however, lead to differences in structure and in folding. In one example the triple substitution K35A/S36A/P37A caused this region of the molecule to change to a more helical conformation. In a second case the mutant with the sequence 34AAAAALAAAKAALAAA49, which spans a loop-helix region, had a dramatically altered thermal unfolding transition, suggesting that this region may tend to form a single, uninterrupted, helix. Substitution of Ala38 in the above construct with aspartic acid caused the unfolding to be more like wildtype, suggesting that residue 38, which is at a helix-capping position in the wildtype structure, provides an initiation signal that is essential in the polyalanine mutant for the correct formation of alpha-helix 39-50. In a typical protein, the information that codes for the 3D structure is presumably distributed over many amino acids. The present results suggest that in simplified sequences the key folding information may be restricted to a subset of critical residues, and so be more readily accessible to experimental analysis.