Assessment of the changes in product characteristics, total ascorbic acid, total flavonoid content, total polyphenol content and antioxidant activity of dried soursop fruit tea (Annona muricata L.) during product storage.

Soursop (Annona muricata L.) fruit tea is a health-beneficial product that promotes economic development and addresses the issue of excessive agricultural waste. Prolonging the shelf-life of soursop fruit tea has been of scientific interest currently. This study evaluated the effects of three types of packaging materials of soursop fruit tea (e.g., paper, paper-combined Polyetylen (PE), and aluminum-combined PE) and different storage temperatures (5, 15, 30, and 45°C) on various product characteristics, total polyphenol content (TPC), total flavonoid content (TFC), total ascorbic acid (TAA), and 2,2-diphenyl-1-picryl hydrazyl (DPPH)/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical scavenging capacity during 4 weeks of storage. The results revealed that the sample stored in aluminum-combined PE packaging at 30°C retained most of the product's characteristics and nutritional values. This was evidenced by the moisture content of 2.49%, TAA of 3.9 ± 1.4 mg/100 g dry weight, TPC of 12.89 ± 0.47 mgGAE/g, TFC of 0.54 ± 0.004 mgQE/g, DPPH scavenging activity of 4.06 ± 0.02 mgAA/g, and ABTS scavenging activity of 13.34 ± 0.32 mgAA/g. Additionally, the microbiological quality of the sample met the standard of TCVN 9740:2013. Overall, the study highlights the importance of packaging materials and storage temperatures to maintain the nutritional quality of soursop fruit tea. It provides valuable insights into the suitable storage conditions for preserving the quality and health-promoting effects of this product.

Assessment of changes in product quality and antioxidant activity of dried soursop (Annona muricata L.) during product storage.

Innovations for product preservation have attracted interest as they may increase the shelf-life of items when stored properly. In this study, the effects of various storage conditions, including four types of packaging (paper packaging, paper combined PE packaging, aluminum combined PE packaging, and plastic jar packaging) and temperatures (5, 15, 30, and 45 °C) on the quality of dried soursop were evaluated. The results demonstrated that the combination of plastic jar packaging and a storage temperature of 15 °C retained a significant portion of the initial total ascorbic acid content, total polyphenol content, and total flavonoid content. After four weeks of storage, the dried soursop preserve packaged in a plastic jar and stored at 15 °C exhibited a moisture content of 22.977 ± 0.093 %, total ascorbic acid content of 9.7 ± 0.46 mg/100gDW, total polyphenol content of 8.12 ± 0.06 mgGAE/gDW, total flavonoid content of 0.18 ± 0.02 mgQE/gDW, DPPH and ABTS scavenging activity of 0.69 ± 0.01 mgAA/gDW and 0.82 ± 0.01 mgAA/gDW, respectively. Moreover, the product meets the requirements of decision 46/2007/QD-BYT regulating the limits on biological and chemical contamination in food. The study offers valuable insights for the food industry in optimizing packaging and storage conditions to ensure the storage of quality and health-beneficial properties of this product.

Influence of spray drying parameters on the physicochemical characteristics of microencapsulated pomelo (Citrus grandis (L.) Osbeck) essential oil.

This study aimed to evaluate the encapsulation of pomelo (Citrus grandis (L.) Osbeck) essential oils using the spray drying technique. The parameters of the process include concentration of maltodextrin (20-35% by wt%/wt%), concentration of essential oil (1-2.5% by wt%/wt%), inlet temperature of spray drying (120-180 °C), and feed flow rates (120-240 mL/h) were soundly examined. The utilization of suitable parameters as the concentration of maltodextrin at 30% (by wt%/wt%), the concentration of essential oil at 1.5% (by wt%/wt%), the inlet temperature of 140 °C, and feed flow rate of 120 mL/h showed the highest drying yields (90.05%), microencapsulation yield (75.59%), and microencapsulation efficiency (89.44%). TGA and DSC results verified higher stability of Citrus grandis essential oil after encapsulation. The encapsulation of pomelo essential oils maintained most of the major components in comparison with the non-encapsulated essential oils without any significant changing in powder-obtained quality. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-022-01161-5.

Anti-arthritic activity and phytochemical composition of "Cao Khai" (Aqueous extracts of Coptosapelta flavescens Korth.).

For a long time, ethnic minorities in Ninh Thuan province have combined "Day Khai" (Coptosapelta flavescens Korth) with many other medicinal herbs, creating an esoteric remedy called "Cao Khai"-an aqueous extract from Day Khai. This study tested an aqueous extract from "Day Khai" for total phenolics, total flavonoids, antioxidant, and anti-inflammatory activity in an in vivo mice model. The aqueous extracts of raw materials C. flavescens collected in different regions were found to have phenolics, flavonoids, and antioxidant capacity in vitro according to DPPH, ABTS, RP, TAC, and FRAP methods. This study evaluated the effect of C. flavescens on arthritis of Complete Freund's adjuvant (CFA) induced-mice by observing changes in the degree of edema in the leg joints blood index and histology. The findings indicated that the "Cao Khai" had anti-inflammatory benefits and lowered the inflammatory symptoms in mice equivalent to Mobic medications (p < 0.05) while also limiting cartilage tissue damage after 14 days of usage. As a result, it is clear that "Cao Khai" can be considered a medicinal herb with tremendous potential for usage as an addition to illness therapy that should be protected and cultivated.

Effects of antibiotics on Vietnam koi, Anabas testudineus, exposed to Aeromonas dhakensis as a co-infection.

The dietary effects of antibiotics on aquatic disease is circumstantial and has not been investigated under infections. the efficacy of erythromycin, after 10 days in use and 10 days off, on the survival and infection rate of (Anabas testudineus) after co-infection with antibiotic-resistant Aeromonas dhakensis (isolate NV5M or V7L). The mortality rate observed in non-medicated groups of co-infected fish (93.3 and 100%) was significantly higher (p < 0.05) than that in the medicated group of naturally infected fish (NIF) (53.3%) but not significantly different to that in medicated groups of co-infected fish (66.6% and 86.6%). In particular, the loads of invasive erythromycin-resistant bacteria (ERB) were markedly higher (p < 0.05, 3.5-4.8 times) in the kidney of co-infected fish medicated for 5 days than those in NIF. The measure of ERB in the kidney of fish co-infected with isolate V7L, whether medicated or not for 10 days, was significantly higher (p < 0.05) than that in non-medicated NIF and also that in the medicated group of fish co-infected with isolate NV5M. In addition to the elevation of gut-derived ERB invasion and colonization in the kidney, synergistic effects of the competition between mixed pathogens caused by co-infection and medication might result in a high fish mortality rate. Further investigation of antibiograms and/or new strategies for aquatic disease control should be undertaken with mixed infections and interaction of pathogens to achieve the optimal treatment effect.

Facile Fabrication of Novel NiFe2O4@Carbon Composites for Enhanced Adsorption of Emergent Antibiotics.

Water purification is becoming one of the most pertinent environmental issues throughout the world. Among common types of water pollution involving heavy metals, pharmaceutical drugs, textile dyes, personal care products, and other persistent organic pollutants, the pollution of antibiotic drugs is increasingly emerging due to their adverse effects on microorganisms, aquatic animals, and human health. Therefore, the treatment of such contaminants is very necessary to reduce the concentration of antibiotic pollutants to permissible levels prior to discharge. Herein, we report the use of NiFe2O4@C composites from a bimetallic-based metal-organic framework Ni-MIL-88B(Fe) for removal of ciprofloxacin (CFX) and tetracycline (TCC). The effect of production temperatures (600-900 °C), solution pH (2-10), NiFe2O4@C dose (0.05-0.2 g/L), concentration of antibiotics (10-60 mg/L), and uptake time (0-480 min) was investigated systematically. Response surface methodology and central composite design were applied for quadratic models to discover optimum conditions of antibiotic adsorption. With high coefficients of determination (R2 = 0.9640-0.9713), the proposed models were significant statistically. Under proposed optimum conditions, the adsorption capacity for CFX and TCC were found at 256.244, and 105.38 mg/g, respectively. Recyclability study was employed and found that NiFe2O4@C-900 could be reused for up to three cycles, offering the potential of this composite as a good adsorbent for removal of emergent antibiotics.

Engineering conversion of Asteraceae plants into biochars for exploring potential applications: A review.

Asteraceae presents one of the most globally prevalent, cultivated, and fundamental plant families. However, a large amount of agricultural wastes has been yearly released from Asteraceae crops, causing adverse impacts on the environment. The objective of this work is to have insights into their biomass potentials and technical possibility of conversion into biochars. Physicochemical properties are systematically articulated to orientate environmental application, soil amendment, and other utilizations. Utilizations of Asteraceae biochars in wastewater treatment can be categorized by heavy metal ions, organic dyes, antibiotics, persistent organic pollutants (POPs), and explosive compounds. Some efforts were made to analyze the production cost, as well as the challenges and prospects of Asteraceae-based biochars.

Lipid composition and molecular species of phospholipid in oyster Crassostrea lugubris (Sowerby, 1871) from Lang Co Beach, Hue Province, Vietnam.

Oysters are widely distributed worldwide, but are mainly concentrated in tropics and subtropics. Total lipid (TL), fatty acid (FA) composition of TL and polar lipid (PoL) fractions, phospholipid (PL) class, and molecular species composition in soft tissues of Crassostrea lugubris were investigated for the first time from Vietnam. Phosphatidylglycolic acid (PGA) is the new phospholipid class first identified in marine species in general and Crassostrea lugubris in particular. Main eight classes of PL were determined in PoL fraction: diphosphatidylglycerol (DPG), phosphatidylethanolamine (PE), phosphatidylcholine (PC), phosphatidylinositol (PI), phosphatidylserine (PS), ceramide aminoethylphosphonate (CAEP), CAEP with hydroxylated FAs (CAEP-OH), and lysophosphatidylcholine. PE and PC accounted for approximately 63% of total known PL. Polyunsaturated FAs accounted for more than 30% of TL. Ninety molecular species of glycerophospholipids, including PGA, PE, PC, PS, PI, DPG, and PG, and sphingophosphonolipids (CAEP) were identified in PoL. Alkenyl-acyl forms of glycerophospholipids were predominated in the molecular species of PGA, PE, and PS. PGA 38:1 (p18:0/20:1), PE 40:6 (p18:0/22:6 and p18:1/22:5), PC 30:0 (14:0/16:0), PS 38:1 (p18:0/20:1), PI 40:5 (20:1/20:4), PG 32:0 (16:0/16:0), DPG 88:24 (22:6/22:6/22:6/22:6), and CAEP 34:2 (d18:2/16:0) were major molecular species.

Multifunctional ZnO nanoparticles bio-fabricated from Canna indica L. flowers for seed germination, adsorption, and photocatalytic degradation of organic dyes.

The potential of green nanomaterials for environmental and agricultural fields is emerging due to their biocompatible, eco-friendly, and cost-effective performance. We report the use of Canna indica flowers extract as new capping and stabilizing source to bio-fabricate ZnO nanoparticles (ZnO NPs for dyes removal, seed germination. ZnO NPs was biosynthesized by ultrasound-assisted alkaline-free route to reach the critical green strategy. The physicochemical findings of ZnO revealed small crystallite size (27.82 nm), sufficient band-gap energy (3.08 eV), and diverse functional groups. Minimum­run resolution IV approach found the most pivotal factors influencing on removal of Coomassie Brilliant Blue G-250. Uptake studies pointed out that pseudo second-order, and Langmuir were the best fitted models. Dye molecules behaved monolayer adsorption on ZnO surface layers, and controlled by chemisorption. Natural solar light was used as effective source for photocatalytic degradation of methylene blue (94.23% of removal and 31.09 mg/g of uptake capacity). Compared with H2O and ZnSO4, ZnO NPs positively affected the growth of shoot and root lengths (10.2-27.8%) of bean seedlings in most cases. ZnO acts an agrochemical for boosting weight gain, and germination ratio. This study may be promising for developing the recyclable, multifunctional ZnO nanoparticles for environmental and agricultural applications.

Bioactive compounds from the aerial parts of Hypericum sampsonii.

Hypericum sampsonii is an important medicinal plant used in Vietnam to treat many diseases such as backache, burns, diarrhea, and swelling. In order to study the chemical constituents in the aerial parts of H. sampsonii, five compounds, including two xanthones (1-2), and three benzophenones (3-5) were isolated from the aerial parts of the H. sampsonii with various chromatographic separations. Their chemical structures were established on the basis of spectroscopic data such as 1D- and 2D-NMR, HR-ESI-MS. Their anti-inflammatory activities were investigated by measuring nitric oxide (NO) production in lipopolysaccharide (LPS)-induced RAW264.7 cells. Moreover, the DPPH radical scavenging was evaluated. As the obtained results, compound 5 showed the strongest inhibitory activity against LPS-stimulated NO production in RAW264.7 cells with IC50 value ranging from 2.00 ± 0.34 µM.

Identification Of Potential Cytotoxic Inhibitors From Physalis Minima.

A phytochemical investigation of Physalis minima led to the isolation of six withanolides, including withanolide E (1), withaperuvin C (2), 4ß-hydroxywithanolide E (3), 28-hydroxywithaperuvin C (4), physaperuvin G (5), and 4-deoxywithaperuvin (6). Their chemical structures were elucidated by 1 D-NMR and 2 D-NMR data, as well as comparison with the data reported in the literature. All isolated compounds were evaluated for their cytotoxic activity against HepG2, SK-LU-1, and MCF7 cancer cell lines. As the obtained results, compounds 1 and 3 displayed the strongest cytotoxicity against HepG2, SK-LU-1, and MCF7 cell lines with IC50 value ranging from 0.051 ± 0.004 to 0.86 ± 0.09 µg/mL.

Biogenic synthesis of MgO nanoparticles from different extracts (flower, bark, leaf) of Tecoma stans (L.) and their utilization in selected organic dyes treatment.

The occurrence and influence of dyes-containing effluents are alarmingly serious; hence, the treatment of such wastewater needs to be undertaken. Here, we report the biosynthesis strategy and utilisation of MgO nanoparticles (MgO NPs) from distinct Tecoma stans (L.) plant extracts (flower, bark, and leaf). The FT-IR spectroscopy revealed the dominance of chemical bonds as well as functional groups on MgO NPs surfaces. For adsorption experiments, the impact of pH, contact time, concentration, and pH on uptake efficiency of congo red (CR) and crystal violet (CV) dyes were investigated and then optimized using response surface methodology and Box-Behnken design. Under the optimal conditions, 99.7% CR (at Ci = 9.33 mg/L, Dos = 0.22, pH = 7.9) and 90.8% CV (at Ci = 5.0 mg/L, Dos = 0.3, pH = 6.3) were attained. The maximum adsorption capacities were calculated from 89.24 to 150.49 mg/g, where MgO NPs derived from flower extract gave better adsorption efficiency than those from other extracts. Therefore, MgO NPs material from Tecoma stans (L.) flower extract is expected as a perspective adsorbent for the effective remediation of organic dyes.

Bioactive compounds from Physalis angulata and their anti-inflammatory and cytotoxic activities.

A new compound, physalucoside A (1), together with seven withanolides (2-8) and three flavonoids (9-11), were isolated from Physalis angulata L. (Solanaceae), a medicinal plant native to Vietnam. The chemical structures of these compounds were elucidated by one- and two-dimensional NMR spectra, high-resolution electrospray ionization mass spectrometry analyses, and chemical reactivity. The anti-inflammatory and cytotoxic activities of isolated compounds were also evaluated. These data suggest that the anti-inflammatory activity of P. angulata is due primarily to its withanolide content. This study demonstrates the potential of withanolides as promising candidates for the development of new anti-inflammatory drugs.

Design, synthesis, structure, in vitro cytotoxic activity evaluation and docking studies on target enzyme GSK-3ß of new indirubin-3'-oxime derivatives.

The addition of chalcone and amine components into indirubin-3'-oxime resulted in 15 new derivatives with high yields. Structures of new derivatives were also elucidated through 1D, 2D-NMR and HR-MS(ESI) spectra and X-ray crystallography. All designed compounds were screened for cytotoxic activity against four human cancer cell lines (HepG2, LU-1, SW480 and HL-60) and one human normal kidney cell line (HEK-293). Compound 6f exhibited the most marked cytotoxicity meanwhile cytotoxicity of compounds 6e, 6h and 6l was more profound toward cancer cell lines than toward normal cell. These new derivatives were further analyzed via molecular docking studies on GSK-3ß enzyme. Docking analysis shows that most of the derivatives exhibited potential inhibition activity against GSK-3ß with characteristic interacting residues in the binding site. The fast pulling of ligand scheme was then employed to refine the binding affinity and mechanism between ligands and GSK-3ß enzyme. The computational results are expected to contribute to predicting enzyme target of the trial inhibitors and their possible interaction, from which the design of new cytotoxic agents could be created in the future.

Effects of microwave blanching conditions on the quality of green asparagus (Asparagus officinalis L.) butt segment.

Blanching is a pretreatment method that is often applied in fruit and vegetable processing to inhibit enzyme activity and reduce loss of food quality. It was recently discovered that well-controlled microwave volumetric heating could improve the blanching efficiency and retain nutritional and sensorial values of product. This study was conducted to investigate effects of microwave blanching conditions on the quality of green asparagus (Asparagus officinalis L.) butt segments, a rich source of fiber and antioxidants but are often discarded during processing. The experiments were designed by one-factor-at-a-time method with two varying factors including blanching time (2, 4, 6, and 8 min) and microwave power output (150, 300, 450, and 600 W). Quality of product was evaluated by sensory, retention of phenolics, and free-radical scavenging activity retention. The results showed that longer blanching time or higher microwave power was associated with reduced quality of green asparagus butt segment. Besides, the appropriate parameters for microwave blanching of the green asparagus butt segment was found at 300 W for 4 min.

Wire-like Pt on mesoporous Ti0.7W0.3O2 Nanomaterial with Compelling Electro-Activity for Effective Alcohol Electro-Oxidation.

Finding out robust active and sustainable catalyst towards alcohol electro-oxidation reaction is major challenges for large-scale commercialization of direct alcohol fuel cells. Herein, a robust Pt nanowires (NWs)/Ti0.7W0.3O2 electrocatalyst, as the coherency of using non-carbon catalyst support and controlling the morphology and structure of the Pt nanocatalyst, was fabricated via an effortless chemical reduction reaction approach at room temperature without using surfactant/stabilizers or template to assemble an anodic electrocatalyst towards methanol electro-oxidation reaction (MOR) and ethanol electro-oxidation reaction (EOR). These observational results demonstrated that the Pt NWs/Ti0.7W0.3O2 electrocatalyst is an intriguing anodic electrocatalyst, which can alter the state-of-the-art Pt NPs/C catalyst. Compared with the conventional Pt NPs/C electrocatalyst, the Pt NWs/Ti0.7W0.3O2 electrocatalyst exhibited the lower onset potential (~0.1 V for MOR and ~0.2 for EOR), higher mass activity (~355.29 mA/mgPt for MOR and ~325.01 mA/mgPt for EOR) and much greater durability. The outperformance of the Pt NWs/Ti0.7W0.3O2 electrocatalyst is ascribable to the merits of the anisotropic one-dimensional Pt nanostructure and the mesoporous Ti0.7W0.3O2 support along with the synergistic effects between the Ti0.7W0.3O2 support and the Pt nanocatalyst. Furthermore, this approach may provide a promising catalytic platform for fuel cell technology and a variety of applications.

Effective Photocatalytic Activity of Sulfate-Modified BiVO4 for the Decomposition of Methylene Blue Under LED Visible Light.

In this study, we investigated sulfate-modified BiVO4 with the high photocatalytic activity synthesized by a sol-gel method in the presence of thiourea, followed by the annealing process at different temperatures. Its structure was characterized by thermal gravimetric analysis (TGA), powder X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). The BiVO4 synthesized in the presence of thiourea and calcined at 600 °C (T-BVO-600) exhibited the highest photocatalytic degradation efficiency of methylene blue (MB) in water; 98.53% MB removal was achieved within 240 min. The reaction mechanisms that affect MB photocatalytic degradation on the T-BVO-600 were investigated via an indirect chemical probe method, using chemical agents to capture the active species produced during the early stages of photocatalysis, including 1,4-benzoquinone (scavenger for O2-), ethylenediaminetetraacetic acid disodium salt (scavenger for h+), and tert-butanol (scavenger for HO•). The results show that holes (h+) and hydroxyl radicals (HO•) are the dominant species of MB decomposition. Photoluminescence (PL) measurement results of terephthalic acid solutions in the presence of BiVO4 samples and BiVO4 powders confirm the involvement of hydroxyl radicals and the separation efficiency of electron-hole pairs in MB photocatalytic degradation. Besides, the T-BVO-600 exhibits good recyclability for MB removal, achieving a removal rate of above 83% after five cycles. The T-BVO-600 has the features of high efficiency and good recyclability for MB photocatalytic degradation. These results provide new insight into the purpose of improving the photocatalytic activity of BiVO4 catalyst.

Application of Fe-based metal-organic framework and its pyrolysis products for sulfonamide treatment.

The occurrence and fate of antibiotic compounds in water can adversely affect human and animal health; hence, the removal of such substrates from soil and water is indispensable. Herein, we described the synthesis method of mesoporous carbon (MPC) via the pyrolysis route from a coordination polymer Fe-based MIL-53 (or MIL-53, shortly). The MPC structure was analyzed by several physical techniques such as SEM, TEM, BET, FT-IR, VSM, and XRD. The response surface methodology (RSM) was applied to find out the effects of initial concentration, MPC dosage, and pH on the removal efficiency of trimethoprim (TMP) and sulfamethoxazole (SMX) antibiotics in water. Under the optimized conditions, the removal efficiencies of TMP and SMX were found to be 87% and 99%, respectively. Moreover, the adsorption kinetic and isotherm studies showed that chemisorption and the monolayer adsorption controlled the adsorption process. The leaching test and recyclability studies indicated that the MPC structure was stable and can be reused for at least four times without any considerable change in the removal efficiency. Plausible adsorption mechanisms were also addressed in this study. Because of high maximum adsorption capacity (85.5 mg/g and 131.6 mg/g for TMP and SMX, respectively) and efficient reusability, MPC is recommended to be a potential adsorbent for TMP and SMX from water media.

A dual synergistic of curcumin and gelatin on thermal-responsive hydrogel based on Chitosan-P123 in wound healing application.

This study aimed to fabricate the potential therapeutic scaffold to efficiently and safely fastening skin wound healing. A biocompatible grafting polymer-based thermal sensitive hybrid hydrogel (Chitosan-P123, CP) containing gelatin and curcumin was designed to be suitable stiffness for tissue regeneration. A detailed in the rheological study found that the encapsulated agents induced the change in the stiffness of the hydrogel from the hard to the soft. Especial, the thermally induced phase transition of CP hydrogel was governed by the participant of gelatin rather than curcumin. For example, at 25 wt% gelatin, CP hydrogel exhibited a unique gel-sol-gel transition following the function of temperature. Moreover, in vitro investigation revealed that the hybrid hydrogel provides the capacity of especially induced curcumin release with a sustainable rate as well as the excellent biocompatibility scaffold. Altogether with in vivo study, the hybrid hydrogel highlighted the advance of the dual synergistic of curcumin and gelatin in development of smart scaffold system, which promoted the efficacy in the regeneration of the structure and the barrier's function of damaged skin such as wound or skin cancer.