Evaluation biodegradable films with green tea extract for interleafing sliced meat products.

A selection of formulations with different polymers and concentrations of green tea extract was conducted for application as interleafs in sliced meat products. Films were formulated using cellulose acetate, corn starch, and chitosan with the addition of 1.0, 2.5, and 5.0% green tea extract. Higher antioxidant activity was observed with the 1.0% concentration of green tea extract (P < 0.05), regardless of the formulation, with continuous release of the extract for up to 60 days and average IC50 of 0.09 and 0.31 mg/mL for the corn starch and chitosan active films, respectively. Interleafing the sliced ham resulted in lower lipid oxidation after 60 days of storage (P < 0.05). Starch-based films with green tea extract were effective, significantly reducing lipid oxidation in sliced and interleafed cooked ham, suggesting their potential to extend the shelf life of these refrigerated products.

Validation of a popsicle as a clear fluid to abbreviate preoperative fasting.

BACKGROUND & AIMS: This study is based on the development and validation of a popsicle to reduce preoperative fasting time. METHODS: The study was carried out in two stages, pre-clinical and clinical validation. The first stage consisted of producing a water-based, fat-free, high-calorie fruit-flavored popsicle, characterized by proximal composition and sensory analysis. In the second stage, clinical validation was performed in patients aged between 18 and 65 years before elective surgery, evaluating the incidence of aspiration during anesthesia and the patient's experience in relation to hunger, thirst, anxiety and palatability of the popsicle. RESULTS: The results of the study showed that the use of popsicle 2 h before the surgical procedure did not cause any adverse reaction in patients and in the anesthetic procedure. Furthermore, the full acceptability of the product by the participants and the control of thirst and satiety during the preoperative period were observed. CONCLUSIONS: The present study showed that with the use of popsicles it was possible to reduce safely the preoperative fasting time to up to 2 h before the surgical procedure.

Malolactic fermentation of lactic acid bacteria isolated from southern Brazilian red wine.

The objective was to isolate lactic acid bacteria (LAB) from southern Brazil's wines and investigate their potential as starter cultures for malolactic fermentation (MLF) in Merlot (ME) and Cabernet Sauvignon (CS) wines through the fermentative capacity. The LAB were isolated from CS, ME, and Pinot Noir (PN) wines in the 2016 and 2017 harvests and evaluated for morphological (color and shape of the colonies), genetic, fermentative (increase in pH, acidity reduction, preservation of anthocyanins, decarboxylation of L-malic acid, yield of L-lactic acid, and content of reduced sugars), and sensory characteristics. Four strains were identified as Oenococcus oeni [CS(16)3B1, ME(16)1A1, ME(17)26, and PN(17)65], one as Lactiplantibacillus plantarum [PN(17)75], and one as Paucilactobacillus suebicus [CS(17)5]. Isolates were evaluated in the MLF and compared to a commercial strain (O. oeni), as well as a control (without inoculation and spontaneous MLF), and standard (without MLF). CS(16)3B1 and ME(17)26 isolates finished the MLF for CS and ME wines, respectively, after 35 days, similar to the commercial strain, and CS(17)5 and ME(16)1A1 isolates ended the MLF in 45 days. In the sensory analysis, ME wines with isolated strains received better scores for flavor and overall quality than the control. Compared to the commercial strain, CS(16)3B1 isolate obtained the highest scores for buttery flavor and taste persistence. CS(17)5 isolate received the higher scores for a fruity flavor and overall quality and the lowest for a buttery flavor. The native LAB displayed MLF potential, regardless of the year and grape species from which they were isolated.

Active edible films based on green tea extract and gelatin for coating of fresh sausage.

The objective of this work was to develop, characterize and evaluate the application of active edible films based on gelatin and green tea extract in coating of fresh sausages. The green tea extract showed IC50 of 0.088 mg/mL and minimum inhibitory concentrations of 0.05 mg/mL for Listeria monocytogenes, 0.025 mg/mL for Staphylococcus aureus, 0.04 mg/mL for Escherichia coli, and >1.0 mg/mL for Salmonella enterica serovar Choleraesuis. The formulation with 15% (w/v) of gelatin and 30% (w/w) of glycerol showed better adhesion and appearance in the coating of the product. When using 1.0% of green tea extract, the lowest IC50, was obtained and the antioxidant activity was maintained for 35 days. There was a more accentuated decrease in pH and an increase in acidity and peroxide index in fresh sausages without film compared to those coated with the active film (1.0% of green tea extract) during storage. In addition, it was found that the use of active gelatin film (1.0% of green tea extract) kept the TBARS indexes of fresh sausage samples lower than the standard (without coating) and of films containing only gelatin, after 48 days of storage.

Newly Isolated Penicillium sp. for Cellulolytic Enzyme Production in Soybean Hull Residue

Abstract (1) Background: The aim of this study was to evaluate the production and partial characterization of xylanase and avicelase by a newly isolated Penicillium sp. in solid-state fermentation, using soybean hulls as substrate. (2) Methods: Temperature, time, number of spores, and substrate moisture on xylanase and avicelase bioproduction were evaluated, maximizing activity with 30°C, 1x106 spores/g substrate, 14 and 7 days of fermentation with 70 and 76% substrate moisture contents, for xylanase and avicelase, respectively. (3) Results: Different solvents, temperatures, and agitation in the enzymatic extraction were evaluated, obtaining higher activities, 430.77 and 26.77 U/g for xylanase and avicelase using 30 min extraction and 0.05 M citrate buffer solution (pH 4.5 ), respectively at 60°C and 175 rpm and 50°C and 125 rpm. The optimum pH and temperature for enzymatic activity determination were 5.3 and 50°C. Enzyme extract stability was evaluated, obtaining higher stability with pH between 4.5 and 5.5, higher temperature of up to 40°C. The kinetic thermal denaturation (Kd), half-life time, D-value, and Z-value were similar for both enzymes. The xylanase Ed value (89.1 kJ/mol) was slightly lower than the avicelase one (96.7 kJ/mol), indicating higher thermostability for avicelase. (4) Conclusion: In this way, the production of cellulases using alternative substrates is a way to reduce production costs, since they represent about 10% of the world demand of enzymes, with application in animal feed processing, food production and breweries, textile processing, detergent and laundry production, pulp manufacturing and the production of biofuels.

Structural and Techno-Functional Properties of BovineCollagen and Its Application in Hamburgers.

The objective of this work is to characterize two types of bovine collagen (fibre and powder), evaluating its application in mixed hamburger formulations, as well as the quality characteristics of the products. The collagen fibre had a fibrillar structure, molecular mass 100 kDa and greater gel strength (146 315 Pa) and protein content (97.81%) than the powdered collagen, which had molecular mass from 50 to 100 kDa, greater hydroxyproline content, and a morphological structure with spherical microparticles more amorphous than the collagen fibre. In this study we found that the addition of 1.5% powdered collagen and 2.5% flocculated soybean flour and/or 0.75% powdered collagen and 3.5% flocculated soybean flour did not deteriorate the technological properties or the sensory attributes of hamburgers. The use of collagen is a promising alternative, since it has functional properties, improves the texture characteristics of a product, and is of low cost.

High pressure extraction of olive leaves (Olea europaea): bioactive compounds, bioactivity and kinetic modelling.

In this study, the extraction yield, the mathematical modeling of pressurized liquid extraction (PLE) kinetics with sub- and supercritical carbon dioxide (SC-CO2) of olive leaves (Olea europaea) and the biological activity of the extracts were evaluated. The extraction with PLE was conducted isobarically (10.3 MPa), varying the temperature (20, 40 and 60 °C) and the solvent (ethyl acetate, acetone, ethanol, ethanol:water-80:20, v:v), solvent flow (2 mL min-1) and time (110 min) and the extractions with SC-CO2, varying the temperature between 20 and 60 °C and the pressure between 8 and 25 MPa, keeping the time constant (210 min) and the CO2 flow of 2 mL min-1. In the extracts, antioxidant activity, total phenolic and flavonoid contents and oleuropein were evaluated. The highest total extract yield in the PLE was 30.91% at 60 °C, 10.3 MPa using ethanol:water (80:20, v:v). The yield obtained using the supercritical fluid was 0.68% at 60 °C and 25 MPa. The PLE extract obtained with ethanol at 60 °C presented the highest concentration of total phenolic content (386.42 mg GAE g-1 extract), total flavonoids content (33.43 mg CAT g-1 extract), oleuropein (73.65 mg g-1 extract) and antioxidant activity (82.87%). The overall extraction curves were modeled using the well-established Sovová model and kinetic extraction model based on the Brunauer-Emmett-Teller theory of adsorption. Both kinetic models used were able to correlate well with the experimental data with slightly better results obtained by the former. The alternative PLE extraction technique investigated in this work was found to be suitable for the extraction of olive leaves after short times of extraction obtaining an extract with high biological activities.

Water absorption and dripping of chicken breast and carcasses during pre-cooling in an industrial system.

This study aimed to evaluate the parameters that influence the water absorption and drip of chicken carcasses due to the processing and pre-cooling of the meat in an industrial chiller. A total of 1,179 chickens were sampled during industrial processing to evaluate the influence of variables, validate the parameters, and conduct histological analysis. The best parameters for guaranteeing absorption levels and drip tests within acceptable limits on chicken carcasses were total residence time of 60 min (in the pre-chiller, chiller 1, and chiller 2); air pressure of chillers at 0.5 bar; the abdominal opening of carcasses at a maximum of 2 cm. These parameters did not influence the protein content, moisture/protein ratio, pH, or lipid content. The validation of the parameters and the histological analysis performed after each cooling stage showed that the most significant structural changes occurred in the pre-chiller, where the temperature of carcasses and water was higher, which contributes to greater absorption.

Evaluation of the TLC quantification method and occurrence of deoxynivalenol in wheat flour of southern Brazil.

The study evaluated a QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction method for use with a TLC quantification procedure for deoxynivalenol (DON). It also surveyed DON occurrence in wheat flour from the southern region of Brazil. Forty-eight wheat flour samples were analysed, divided into 2 different harvest lots, each consisting of 24 different brands. The detection and quantification limits of the method were 30 and 100 ng of DON on the TLC plate. The various concentrations of DON presented high linearity (R2 = 0.99). A negative matrix effect (-28%) of the wheat flour was verified, with suppression of the chromatographic signal of DON, and 80.2-105.4% recovery. The TLC method was reliable for DON evaluation, with a coefficient of variation of less than 10%. High-performance liquid chromatography of lot 2 samples confirmed the presence of DON in all samples identified DON-positive by the TLC technique. Of the 48 wheat flour samples in lots 1 and 2 analysed by TLC, 33.3 and 45.8% of the samples respectively were above the Brazilian legislation limit. Correlations were observed between the water activity and DON content, and between the fungal count and moisture content of the wheat flours.

Biomimetic Mineralization of the Alginate/Gelatin/Calcium Oxalate Matrix for Immobilization of Pectinase: Influence of Matrix on the Pectinolytic Activity.

Pectinases catalyze the degradation of pectic substances and are used in several processes, mainly in food and textile industries. In this study, a biomimetic matrix of alginate/gelatin/calcium oxalate (AGOCa) was synthesized for the in situ immobilization via encapsulation of crude pectinase from Aspergillus niger ATCC 9642, obtaining an immobilization efficiency of about 61.7 %. To determine the performance of AGOCa matrix, this was compared to control matrices of alginate/calcium oxalate (AOxal) and alginate/water (ACa). By the evaluation of pH and temperature effects on the enzyme activity, it was observed an increase on pectinolytic activity for both three tested matrices with an increase on pH and temperature. The kinetic parameters for pectinase immobilized in the three matrices were determined using citric pectin as substrate. Values of K m of 0.003, 0.0013, and 0.0022 g mL(-1) and V max of 3.85, 4.32, and 3.17 µmol min(-1) g(-1) for AGOCa, AOxal, and ACa matrices were obtained, respectively. After 33 days of storage, the pectinase immobilized in the three different matrices kept its initial activity, but that immobilized in AGOCa presented high stability to the storage with a relative activity of about 160 %. The enzyme immobilized in AGOCa, AOxal, and ACa could be used in 10, 8, and 7 cycles, respectively, keeping 40 % of its initial activity.