Evaluation of Pallet Covers Performance for Produce Protection in Cold Chain Logistics for Chard, Cucumbers and Carrots.

Cold chain disruption and refrigeration failures are common issues in the logistics of perishable food products. In these cases, the use of pallet covers should be very useful, delaying the increase of product temperatures inside the pallets until cooling conditions are restored. However, there are no studies about the performance of pallet covers in these types of situations, which could persist for hours. This paper evaluates the performance of three different types of cold chain covers versus having no cover for three different types of vegetables (chard, cucumbers, and carrots). A refrigeration failure during the cold chain was simulated. The three covers presented an improvement in temperature loss compared to the no-cover situation, with the average time for the temperature to increase from 4 to 10 °C with a cover being a range of 214 to 506 min, while for no cover, from 162 to 211 min. Relative humidity (RH) always presented improved preservation with a cover than with no cover, except for one case. The correlation between the thermal images and sensor temperatures was also studied.

Refrigerated fruit storage monitoring combining two different wireless sensing technologies: RFID and WSN.

Every day, millions of tons of temperature-sensitive goods are produced, transported, stored or distributed worldwide, thus making their temperature and humidity control essential. Quality control and monitoring of goods during the cold chain is an increasing concern for producers, suppliers, logistic decision makers and consumers. In this paper we present the results of a combination of RFID and WSN devices in a set of studies performed in three commercial wholesale chambers of 1848 m3 with different set points and products. Up to 90 semi-passive RFID temperature loggers were installed simultaneously together with seven motes, during one week in each chamber. 3D temperature mapping charts were obtained and also the psychrometric data model from ASABE was implemented for the calculation of enthalpy changes and the absolute water content of air. Thus thank to the feedback of data, between RFID and WSN it is possible to estimate energy consumption in the cold room, water loss from the products and detect any condensation over the stored commodities.