Mechanical and microstructural studies in a polysaccharide-acrylate double network hydrogel.

Polymeric hydrogels continue to find a wide range of applications. However, a major drawback of hydrogels is the lack of mechanical strength. In this regard, "Double Network Hydrogels" (DN) have shown great promise recently. The toughness in DN hydrogels originates from the synergistic effect of two polymeric networks. In this work, we have synthesized a DN hydrogel consisting of a tightly cross linked carboxymethylcellulose (CMC) as the first network and loosely cross linked poly(hydroxyethylacrylate) (PHEA) as a second network (CMC-PHEA-DN). The required flexibility in the second network (PHEA) was induced by the presence of a small amount of stearyl methacrylate (SM) as a co-monomer in hydroxyl ethyl acrylate (HEA). The compressive strength of the CMC-PEHA-DN hydrogel was found to be 280 times more than that of CMC-SN hydrogel, and the presence of SM in DN hydrogels showed better recovery after deformation. Cell viability studies showed the biocompatibility of DN hydrogels. The micro-structural analysis of DN xerogels by 3D X-ray Microtomography indicated the presence of oriented pores in size range of 30-40 µm. To the best of our knowledge, Microtomography was used for the first time to study the DN gels. These hydrogels can be used to develop implants that can withstand prolonged stress and expand the life span of implants.

Design and synthesis of a new topical agent for halting blood loss rapidly: A multimodal chitosan-gelatin xerogel composite loaded with silica nanoparticles and calcium.

Uncontrolled hemorrhage often causes death during traumatic injuries and halting exsanguination topically is a challenge. Here, an efficient multimodal topical hemostat was developed by (i) ionically crosslinking chitosan and gelatin with sodium tripolyphosphate for (ii) fabricating a robust, highly porous xerogel by lyophilization having 86.7 % porosity, by micro-CT and large pores ∼30 µm by SEM (iii) incorporating 0.5 mg synthesized silica nanoparticles (SiNPs, 120 nm size, -22 mV charge) and 2.5 mM calcium in xerogel composite that was confirmed by FTIR analysis with peaks at 3372, 986 and 788 cm-1, respectively. XPS analysis displayed the presence of SiNPs (Si2p peak for silicon) and calcium (Ca2p1, Ca2p3 transition peaks) in the composite. Interestingly, in silico percolation simulation for composite revealed interlinked 800 µm long-conduits predicting excellent absorption capacity and validated experimentally (640 % of composite dry weight). The composite achieved >16-fold improved blood clotting in vitro than commercial Celox and Gauze through multimodal interaction of its components with RBCs and platelets. The composite displayed good platelet activation and thrombin generation activities. It displayed high compressive strength (2.45 MPa) and withstood pressure during application. Moreover, xerogel composite showed high biocompatibility. In vivo application of xerogel composite to lethal femoral artery injury in rats achieved hemostasis (2.5 min) significantly faster than commercial Celox (3.3 min) and Gauze (4.6 min) and was easily removed from the wound. The gamma irradiated composite was stable till 1.5 yr. Therefore, the xerogel composite has potential for application as a rapid topical hemostatic agent.

An In Situ Cross-Linked Nonaqueous Polymer Electrolyte for Zinc-Metal Polymer Batteries and Hybrid Supercapacitors.

This work reports the facile synthesis of nonaqueous zinc-ion conducting polymer electrolyte (ZIP) membranes using an ultraviolet (UV)-light-induced photopolymerization technique, with room temperature (RT) ionic conductivity values in the order of 10-3 S cm-1 . The ZIP membranes demonstrate excellent physicochemical and electrochemical properties, including an electrochemical stability window of >2.4 V versus Zn|Zn2+ and dendrite-free plating/stripping processes in symmetric Zn||Zn cells. Besides, a UV-polymerization-assisted in situ process is developed to produce ZIP (abbreviated i-ZIP), which is adopted for the first time to fabricate a nonaqueous zinc-metal polymer battery (ZMPB; VOPO4 |i-ZIP|Zn) and zinc-metal hybrid polymer supercapacitor (ZMPS; activated carbon|i-ZIP|Zn) cells. The VOPO4 cathode employed in ZMPB possesses a layered morphology, exhibiting a high average operating voltage of ≈1.2 V. As compared to the conventional polymer cell assembling approach using the ex situ process, the in situ process is simple and it enhances the overall electrochemical performance, which enables the widespread intrusion of ZMPBs and ZMPSs into the application domain. Indeed, considering the promising aspects of the proposed ZIP and its easy processability, this work opens up a new direction for the emergence of the zinc-based energy storage technologies.

Biofilm formation to inhibition: Role of zinc oxide-based nanoparticles.

Zinc oxide nanoparticles have received much attention worldwide as they possess unique properties like varied morphology, large surface area to volume ratio, potent antibacterial activity, and biocompatibility. Biofilm contains homogenous or heterogeneous microorganisms that remain enclosed in a matrix of an extracellular polymeric substance on biotic or abiotic surfaces. Bacterial biofilm formed on medical devices such as central venous catheters, urinary catheters, prosthetic joints, cardiovascular implantable devices, dental implants, contact lenses, intrauterine contraceptive devices and breast implants cause persistent infections. Such biofilm-associated infections in medical implants cause serious problems for public health and affect the function of medical implants. So, there is an urgent need for the use of an antimicrobial agent that will inhibit biofilm, including such antibiotic-resistant bacterial strains as bacteria, to develop multiple drug-resistances resulting in failure of the antibiotic's action. The antimicrobial agent used should be ideal in terms of biocompatibility, antimicrobial activity, stability at different environmental conditions, with less sensitivity to the development of resistance towards micro-organisms, safe for in vivo and in vitro use, and remain non-hazardous to the environment, etc. The first objective of the review discusses the insights into the formation of biofilm on a medical device with the current strategies to inhibit. The second purpose is to review the recent progress in ZnO- based nanostructure including composites for antibacterial and anti-biofilm activities. This will offer a new opportunity for the application of Zinc oxide-based material in the prevention of biofilm on the medical devices.

Studies on the use of sodium polyacrylate (SPA) for low-salt animal skin preservation.

Salt-based preservation is practiced for decades in the leather industry because of its versatility, cost-effectiveness, and availability. The salt removed from the soaking process causes significant pollution including organic and elevated total dissolved solids (TDS). Hence, a low-salt skin preservation method using commercial sodium polyacrylate with a reduced quantity of sodium chloride aiming to retain leather properties and pollution reduction was the principal focus of the study. Commercial sodium polyacrylate initially characterized for water absorption capacity along with structural and functional properties is confirmed by NMR and IR spectroscopic techniques. In preliminary experiments, the process parameters attained optimized conditions of sodium polyacrylate (SPA) quantity (5%), a minimal amount of salt (15%), and contact time (4 h) required for skin preservation. Besides, reusability studies after SPA recovery (95%) were applied to skins with an optimized quantity of SPA and salt subsequently stored for 15 days along with control (40% salt). The results revealed that SPA with low salt aided an adequate curing efficiency with a substantial reduction (> 65%) of TDS and comparable physical and organoleptic properties on par with the conventional method. Overall, SPA supported low-salt skin preservation reduces pollutant load (TDS) caused due to using of 40% sodium chloride in the conventional curing process.

Self-assemblies of nucleolipid supramolecular synthons show unique self-sorting and cooperative assembling process.

The inherent control of the self-sorting and co-assembling process that has evolved in multi-component biological systems is not easy to emulate in vitro using synthetic supramolecular synthons. Here, using the basic component of nucleic acids and lipids, we describe a simple platform to build hierarchical assemblies of two component systems, which show an interesting self-sorting and co-assembling behavior. The assembling systems are made of a combination of amphiphilic purine and pyrimidine ribonucleoside-fatty acid conjugates (nucleolipids), which were prepared by coupling fatty acid acyl chains of different lengths at the 2'-O- and 3'-O-positions of the ribose sugar. Individually, the purine and pyrimidine nucleolipids adopt a distinct morphology, which either supports or does not support the gelation process. Interestingly, due to the subtle difference in the order of formation and stability of individual assemblies, different mixtures of supramolecular synthons and complementary ribonucleosides exhibit a cooperative and disruptive self-sorting and co-assembling behavior. A systematic morphological analysis combined with single crystal X-ray crystallography, powder X-ray diffraction (PXRD), NMR, CD, rheological and 3D X-ray microtomography studies provided insights into the mechanism of the self-sorting and co-assembling process. Taken together, this approach has enabled the construction of assemblies with unique higher ordered architectures and gels with remarkably enhanced mechanical strength that cannot be derived from the respective single component systems.

In Vivo Wound Healing Performance of Halloysite Clay and Gentamicin-Incorporated Cellulose Ether-PVA Electrospun Nanofiber Mats.

Wound healing is a dynamic and complex process that requires a suitable environment to enhance the rapid healing process. In this context, fabrications of nanofibrous materials with antibiotic and antibacterial properties are becoming extremely important. In this present work, we report on the fabrication and characterization of electro-spun cellulose ether-PVA nanofiber mats loaded with halloysite clay (HNT) and gentamicin sulfate (GS) for faster wound healing applications. The morphology of nanofiber mats was examined by SEM and TEM. The average diameter of the nanofiber mats were in the range of 325 ± 30 nm. The physicochemical characterizations were done by FT-IR and XRD, which reveal the presence of HNT and GS into the nanofibers. The incorporation of halloysite gave good mechanical strength to the nanofiber mats. Swelling studies indicated the hydrophilicity of the mats. In vitro studies revealed that HNTs are nontoxic to L929 fibroblast cells and also promote cell growth and proliferation. The antibacterial property of HNT was also studied. The slow release of GS from the nanofiber mats was observed for a period of 18 days. The in vivo wound healing studies on the wistar rats for 21 days revealed the wound healing faster within 2 weeks by the incorporation of HNT and GS into the nanofiber mats and hence these nanofiber mats show great potential in acute and chronic wound healing applications.

Synthesis and characterization of zinc oxide nanoparticles by using polyol chemistry for their antimicrobial and antibiofilm activity.

The present investigation deals with facile polyol mediated synthesis and characterization of ZnO nanoparticles and their antimicrobial activities against pathogenic microorganisms. The synthesis process was carried out by refluxing zinc acetate precursor in diethylene glycol(DEG) and triethylene glycol(TEG) in the presence and in the absence of sodium acetate for 2 h and 3 h. All synthesized ZnO nanoparticles were characterized by X-ray diffraction (XRD), UV visible spectroscopy (UV), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy(FESEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) technique. All nanoparticles showed different degree of antibacterial and antibiofilm activity against Gram-positive Staphylococcus aureus (NCIM 2654)and Gram-negative Proteus vulgaris (NCIM 2613). The antibacterial and antibiofilm activity was inversely proportional to the size of the synthesized ZnO nanoparticles. Among all prepared particles, ZnO nanoparticles with least size (~ 15 nm) prepared by refluxing zinc acetate dihydrate in diethylene glycol for 3 h exhibited remarkable antibacterial and antibiofilm activity which may serve as potential alternatives in biomedical application.

Mechanism of the formation of microphase separated water clusters in a water-mediated physical network of perfluoropolyether tetraol.

Perfluoropolyether tetraol (PFPE tetraol) possesses a hydrophobic perfluoropolyether chain in the backbone and two hydroxyl groups at each chain terminal, which facilitates the formation of hydrogen bonds with water molecules resulting in the formation an extended physical network. About 3 wt% water was required for the formation of the microphase separated physical network of PFPE tetraol. The mechanism responsible for the microphase separation of water clusters in the physical network was studied using a combination of techniques such as NMR spectroscopy, molecular dynamics (MD) simulations and DSC. MD simulation studies provided evidence for the formation of clusters in the PFPE tetraol physical network and the size of these clusters increased gradually with an increase in the extent of hydration. Both MD simulations and NMR spectroscopy studies revealed that these clusters position themselves away from the hydrophobic backbone or vice versa. The presence of intra- and inter-chain aggregation possibility among hydrophilic groups was evident. DSC results demonstrated the presence of tightly and loosely bound water molecules to the terminal hydroxyl groups of PFPE tetraol through hydrogen bonding. The data from all the three techniques established the formation of a physical network driven by hydrogen bonding between the hydrophilic end groups of PFPE tetraol and water molecules. The flexible nature of the PFPE tetraol backbone and its low solubility parameter favour clustering of water molecules at the terminal groups and result in the formation of a gel.

Electrospinning of non-ionic cellulose ethers/polyvinyl alcohol nanofibers: Characterization and applications.

The morphology of spin-coated films and electrospun fibers of ethyl hydroxy ethyl cellulose (EHEC), hydrophobically modified ethyl hydroxy ethyl cellulose (HM-EHEC) and their blends with Poly(vinyl alcohol) (PVA) was examined by AFM, SEM and contact angle measurements. These polysaccharides upon blending with PVA exhibited smooth surface which was evidenced by Atomic Force Microscopy (AFM) observation. The electrospinnability of above polysaccharides with PVA was demonstrated for the first time. The oriented fibers could be obtained using a rotating disc collector. Contact angles of spin-coated films and electrospun fibers were discussed in terms of hydrophobicity and wetting characteristics. Further, The nanofibers of EHEC/PVA were in-situ crosslinked using citric acid and were used for controlled release of an antibacterial drug, Chlorhexidine Digluconate (ChD). In-vitro studies of cytotoxicity, cell growth and cell proliferation were performed using L929 mouse fibroblast cells. These nanofiber mats show potential in drug delivery and as scaffolds in tissue engineering applications.

Carboxymethyl Cellulose-Grafted Mesoporous Silica Hybrid Nanogels for Enhanced Cellular Uptake and Release of Curcumin.

Mesoporous silica nanoparticles (MSNs) with ordered pore structure have been synthesized and used as carriers for the anticancer drug curcumin. MSNs were functionalized with amine groups and further attached with carboxymethyl cellulose (CMC) using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) coupling chemistry, which increased the hydrophilicity and biocompatibility of MSNs. The functionalized MSNs (MSN-NH2 and MSN-CMC) were characterized using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS), N2 adsorption, X-Ray Diffraction (XRD), Thermo Gravimetric Analysis (TGA) and Fourier Transform Infrared Spectroscopy (FT-IR). The in vitro release of curcumin from the ⁻NH2 and CMC functionalized MSNs (MSN-cur-NH2 and MSN-cur-CMC) was performed in 0.5% aqueous solution of sodium lauryl sulphate (SLS). The effect of CMC functionalization of MSNs towards cellular uptake was studied in the human breast cancer cell line MDA-MB-231 and was compared with that of MSN-NH2 and free curcumin (cur). Both MSN-NH2 and MSN-CMC showed good biocompatibility with the breast cancer cell line. The MTT assay study revealed that curcumin-loaded MSN-cur-CMC showed better uptake as compared to curcumin-loaded MSN-cur-NH2. Free curcumin was used as a control and was shown to have much less internalization as compared to the curcumin-loaded functionalized MSNs due to poor bioavailability. Fluorescence microscopy was used to localize the fluorescent drug curcumin inside the cells. The work demonstrates that CMC-functionalized MSNs can be used as potential carriers for loading and release of hydrophobic drugs that otherwise cannot be used effectively in their free form for cancer therapy.

High-Performance Flexible Solid-State Supercapacitor with an Extended Nanoregime Interface through in Situ Polymer Electrolyte Generation.

Here, we report an efficient strategy by which a significantly enhanced electrode-electrolyte interface in an electrode for supercapacitor application could be accomplished by allowing in situ polymer gel electrolyte generation inside the nanopores of the electrodes. This unique and highly efficient strategy could be conceived by judiciously maintaining ultraviolet-triggered polymerization of a monomer mixture in the presence of a high-surface-area porous carbon. The method is very simple and scalable, and a prototype, flexible solid-state supercapacitor could even be demonstrated in an encapsulation-free condition by using the commercial-grade electrodes (thickness = 150 µm, area = 12 cm(2), and mass loading = 7.3 mg/cm(2)). This prototype device shows a capacitance of 130 F/g at a substantially reduced internal resistance of 0.5 Ω and a high capacitance retention of 84% after 32000 cycles. The present system is found to be clearly outperforming a similar system derived by using the conventional polymer electrolyte (PVA-H3PO4 as the electrolyte), which could display a capacitance of only 95 F/g, and this value falls to nearly 50% in just 5000 cycles. The superior performance in the present case is credited primarily to the excellent interface formation of the in situ generated polymer electrolyte inside the nanopores of the electrode. Further, the interpenetrated nature of the polymer also helps the device to show a low electron spin resonance and power rate and, most importantly, excellent shelf-life in the unsealed flexible conditions. Because the nature of the electrode-electrolyte interface is the major performance-determining factor in the case of many electrochemical energy storage/conversion systems, along with the supercapacitors, the developed process can also find applications in preparing electrodes for the devices such as lithium-ion batteries, metal-air batteries, polymer electrolyte membrane fuel cells, etc.

Drug-Drug Molecular Salt Hydrate of an Anticancer Drug Gefitinib and a Loop Diuretic Drug Furosemide: An Alternative for Multidrug Treatment.

A 1:1 monohydrate salt containing gefitinib, an orally administrated chemotherapy treatment for lung and breast cancers and furosemide, a loop diuretic drug, commonly used in the treatment of hypertension and edema, has been prepared. The molecular salt crystallized in triclinic P-1 space group. The C-O bond lengths (~1.26 Å) in the COOH group show that proton transfer has occurred from furosemide to morpholine moiety of the gefitinib suggesting cocrystal to be ionic. The morpholine moiety of the gefitinib showed significant conformational change because of its involvement in conformation dictating the strong N-H···O hydrogen bonding interaction. The strong hydrogen bonding interaction between gefitinib and furosemide places their benzene rings in stacking mode to facilitate the generation of π-stack dimers. The neighboring dimers are bridged to each other via water molecule through N-H···O, C-H···O, O-H···N, and O-H···O interactions. The remarkable stability of the salt hydrate could be attributed to the strong hydrogen bonding interactions in the crystal structure. Interestingly, release of water from the lattice at 140°C produced new anhydrous salt that has better solubility and dissolution rate than salt hydrate. The drug-drug molecular salt may have some bearing on the treatment of patient suffering from anticancer and hypertension.

Synthesis and characterization of PEPO grafted carboxymethyl guar and carboxymethyl tamarind as new thermo-associating polymers.

New thermo associating polymers were designed and synthesized by grafting amino terminated poly(ethylene oxide-co-propylene oxide) (PEPO) onto carboxymethyl guar (CMG) and carboxymethyl tamarind (CMT). The grafting was performed by coupling reaction between NH2 groups of PEPO and COOH groups of CMG and CMT using water-soluble EDC/NHS as coupling agents. The grafting efficiency and the temperature of thermo-association, T(assoc) in the copolymer were studied by NMR spectroscopy. The graft copolymers, CMG-g-PEPO and CMT-g-PEPO exhibited interesting thermo-associating behavior which was evidenced by the detailed rheological and fluorescence measurements. The visco-elastic properties (storage modulus, G'; loss modulus, G") of the copolymer solutions were investigated using oscillatory shear experiments. The influence of salt and surfactant on the T(assoc) was also studied by rheology, where the phenomenon of "Salting out" and "Salting in" was observed for salt and surfactant, respectively, which can give an easy access to tunable properties of these copolymers. These thermo-associating polymers with biodegradable nature of CMG and CMT can have potential applications as smart injectables in controlled release technology and as thickeners in cosmetics and pharmaceutical formulations.

Electrodeposited polyethylenedioxythiophene with infiltrated gel electrolyte interface: a close contest of an all-solid-state supercapacitor with its liquid-state counterpart.

We report the design of an all-solid-state supercapacitor, which has charge storage characteristics closely matching that of its liquid-state counterpart even under extreme temperature and humidity conditions. The prototype is made by electro-depositing polyethylenedioxythiophene (PEDOT) onto the individual carbon fibers of a porous carbon substrate followed by intercalating the matrix with polyvinyl alcohol-sulphuric acid (PVA-H2SO4) gel electrolyte. The electrodeposited layer of PEDOT maintained a flower-like growth pattern along the threads of each carbon fiber. This morphology and the alignment of PEDOT led to an enhanced surface area and electrical conductivity, and the pores in the system enabled effective intercalation of the polymer-gel electrolyte. Thus, the established electrode-electrolyte interface nearly mimics that of its counterpart based on the liquid electrolyte. Consequently, the solid device attained very low internal resistance (1.1 Ω cm(-2)) and a high specific capacitance (181 F g(-1)) for PEDOT at a discharge current density of 0.5 A g(-1). Even with a high areal capacitance of 836 mF cm(-2) and volumetric capacitance of 28 F cm(-3), the solid device retained a mass-specific capacitance of 111 F g(-1) for PEDOT. This is in close agreement with the value displayed by the corresponding liquid-state system (112 F g(-1)), which was fabricated by replacing the gel electrolyte with 0.5 M H2SO4. The device also showed excellent charge-discharge stability for 12 000 cycles at 5 A g(-1). The performance of the device was consistent even under wide-ranging humidity (30-80%) and temperature (-10 to 80 °C) conditions. Finally, a device fabricated by increasing the electrode area four times was used to light an LED, which validated the scalability of the process.

Design of a high performance thin all-solid-state supercapacitor mimicking the active interface of its liquid-state counterpart.

Here we report an all-solid-state supercapacitor (ASSP) which closely mimics the electrode-electrolyte interface of its liquid-state counterpart by impregnating polyaniline (PANI)-coated carbon paper with polyvinyl alcohol-H2SO4 (PVA-H2SO4) gel/plasticized polymer electrolyte. The well penetrated PVA-H2SO4 network along the porous carbon matrix essentially enhanced the electrode-electrolyte interface of the resulting device with a very low equivalent series resistance (ESR) of 1 Ω/cm(2) and established an interfacial structure very similar to a liquid electrolyte. The designed interface of the device was confirmed by cross-sectional elemental mapping and scanning electron microscopy (SEM) images. The PANI in the device displayed a specific capacitance of 647 F/g with an areal capacitance of 1 F/cm(2) at 0.5 A/g and a capacitance retention of 62% at 20 A/g. The above values are the highest among those reported for any solid-state-supercapacitor. The whole device, including the electrolyte, shows a capacitance of 12 F/g with a significantly low leakage current of 16 µA(2). Apart from this, the device showed excellent stability for 10000 cycles with a coulombic efficiency of 100%. Energy density of the PANI in the device is 14.3 Wh/kg.

Controlled release of nutrients to mammalian cells cultured in shake flasks.

Though cell culture-based protein production processes are rarely carried out under batch mode of operation, cell line and initial process development operations are usually carried out in batch mode due to simplicity of operation in widely used scale down platforms like shake flasks. Nutrient feeding, if performed, is achieved by bolus addition of concentrated feed solution at different intervals, which leads to large transient increases in nutrient concentrations. One negative consequence is increased waste metabolite production. We have developed a hydrogel-based nutrient delivery system for continuous feeding of nutrients in scale down models like shake flasks without the need for manual feed additions or any additional infrastructure. Continuous delivery also enables maintaining nutrient concentrations at low levels, if desired. The authors demonstrate the use of these systems for continuous feeding of glucose and protein hydrolysate to a suspension Chinese Hamster Ovary (CHO) culture in a shake flask. Glucose feeding achieved using the glucose-loaded hydrogel resulted in a 23% higher integral viable cell density and an 89% lower lactate concentration at the end of the culture when compared with a bolus-feed of glucose.

Molecular origins of wettability of hydrophobic poly(vinylidene fluoride) microporous membranes on poly(vinyl alcohol) adsorption: Surface and interface analysis by XPS.

Irreversible adsorption of poly(vinyl alcohol) (PVA) on hydrophobic, porous poly(vinylidene fluoride) (PVDF) membranes was carried out using aqueous PVA solution. Water permeation was observed in PVDF microporous membranes after PVA adsorption, and maximum permeability was obtained after treatment with 4% PVA solution. Water permeability increased linearly with increasing PVA concentration up to 4%, and then a marginal decrease with a further increase in PVA concentration occurred. PVA adsorbed PVDF membranes were subjected to intense physicochemical analysis, especially with XPS. XPS results display the presence of an interface between PVA and PVDF, and the binding energy (BE) of the interface is low for the PVDF membranes treated with 4% PVA. Carbon from CF2-groups and F 1s core level clearly showed a decrease in its content on the surface after PVA adsorption and showed a minimum fluorine content at 4% PVA. F 1s BE shifts by 0.5 eV upon PVA adsorption and is independent of PVA concentration. EDAX analysis indicates that the bulk oxygen content remains within 4.5 +/- 0.6% and is independent of the PVA concentration. Nonetheless, a large amount of surface atom percentage of oxygen (20 +/- 4%) from O 1s core level shows an increase in PVA content on the surface of PVDF, and it is restricted mostly to the surface. The 4% PVA treated PVDF membrane clearly shows a broadening of O 1s core level to lower BE and indicates the interaction between PVDF and PVA which is significantly different compared to any other compositions. A new valence band feature at low BE, which is nonexistent on PVDF, develops after PVA adsorption. This indicates that the shift in the nature of the highest occupied molecular orbital (HOMO) derived mostly from oxygen; simultaneously, a suppression in the PVDF derived band indicates the change in nature of the PVA adsorbed surfaces from hydrophobic to hydrophilic. The above observations also suggest an irreversible electronic interaction between PVA and PVDF, possibly through charge transfer.