Highway Regional Classification Method Based on Traffic Flow Characteristics for Highway Safety Assessment.

Accurate regional classification of highways is a critical prerequisite to implement a tailored safety assessment. However, there has been inadequate research on objective classification considering traffic flow characteristics for highway safety assessment purposes. We propose an objective and easily applicable classification method that considers the administrative divisions of South Korea. We evaluated the feasibility of this method through various theoretical analysis techniques using the data collected from 536 permanent traffic volume counting stations for the national highways in South Korea in 2019. The ratio of the annual average hourly traffic volume to the annual average daily traffic was used as the explanatory variable. The corresponding results of factor and cluster analyses with this ratio showed a 61% concordance with the urban, suburban, and rural areas classified by the administrative divisions. The results of two-sample goodness-of-fit tests also confirmed that the difference in the three distributions of hourly volume ratios was statistically significant. The results of this study can help enhance highway safety and facilitate the development and application of more appropriate highway safety assessment tools, such as Road Assessment Programs or crash prediction models, for specific regions using the proposed method.

Two-Dimensional LiDAR Sensor-Based Three-Dimensional Point Cloud Modeling Method for Identification of Anomalies inside Tube Structures for Future Hypersonic Transportation.

The hyperloop transportation system has emerged as an innovative next-generation transportation system. In this system, a capsule-type vehicle inside a sealed near-vacuum tube moves at 1000 km/h or more. Not only must this transport tube span over long distances, but it must be clear of potential hazards to vehicles traveling at high speeds inside the tube. Therefore, an automated infrastructure anomaly detection system is essential. This study sought to confirm the applicability of advanced sensing technology such as Light Detection and Ranging (LiDAR) in the automatic anomaly detection of next-generation transportation infrastructure such as hyperloops. To this end, a prototype two-dimensional LiDAR sensor was constructed and used to generate three-dimensional (3D) point cloud models of a tube facility. A technique for detecting abnormal conditions or obstacles in the facility was used, which involved comparing the models and determining the changes. The design and development process of the 3D safety monitoring system using 3D point cloud models and the analytical results of experimental data using this system are presented. The tests on the developed system demonstrated that anomalies such as a 25 mm change in position were accurately detected. Thus, we confirm the applicability of the developed system in next-generation transportation infrastructure.

Piezoelectric Impedance-Based Non-Destructive Testing Method for Possible Identification of Composite Debonding Depth.

Detecting the depth and size of debonding in composite structures is essential for assessing structural safety as it can weaken the structure possibly leading to a failure. As composite materials are used in various fields up to date including aircrafts and bridges, inspections are carried out to maintain structural integrity. Although many inspection methods exist for detection damage of composites, most of the techniques require trained experts or a large equipment that can be time consuming. In this study, the possibility of using the piezoelectric material-based non-destructive method known as the electromechanical impedance (EMI) technique is used to identify the depth of debonding damage of glass epoxy laminates. Laminates with various thicknesses were prepared and tested to seek for the possibility of using the EMI technique for identifying the depth of debonding. Results show promising outcome for bringing the EMI technique a step closer for commercialization.

Damage Detection Performance of the Electromechanical Impedance (EMI) Technique with Various Attachment Methods on Glass Fibre Composite Plates.

Composite materials such as glass and carbon fibre composites have become popular and the preferred choice in various applications due to their many advantages such as corrosion resistance, design flexibility, high strength and light weight. Combining materials with different mechanical properties make composites more difficult to evaluate where the damage mechanisms for composites are more complex than traditional materials such as steel. A relatively new non-destructive testing (NDT) method known as the electromechanical impedance (EMI) technique has been studied by various researchers, but the damage detection performance of the method on composite structures still requires more investigations before it can be accepted for field application, especially in aerospace industry due to the high standard of safety. In this paper, the detection capabilities and performance of the EMI technique subjected to different PZT attachment methods have been investigated. To this end, glass fibre composite plates with various attachment methods for the sensor have been prepared and detection of common defects such as delamination and crack with the EMI technique under study has been performed. The performance of each attachment method for identifying different damage types has been analysed and finite element analysis (FEA) was carried out for verification of the experimental results.

A Review of the Piezoelectric Electromechanical Impedance Based Structural Health Monitoring Technique for Engineering Structures.

The birth of smart materials such as piezoelectric (PZT) transducers has aided in revolutionizing the field of structural health monitoring (SHM) based on non-destructive testing (NDT) methods. While a relatively new NDT method known as the electromechanical (EMI) technique has been investigated for more than two decades, there are still various problems that must be solved before it is applied to real structures. The technique, which has a significant potential to contribute to the creation of one of the most effective SHM systems, involves the use of a single PZT for exciting and sensing of the host structure. In this paper, studies applied for the past decade related to the EMI technique have been reviewed to understand its trend. In addition, new concepts and ideas proposed by various authors are also surveyed, and the paper concludes with a discussion of the potential directions for future works.

Adhesive Defect Monitoring of Glass Fiber Epoxy Plate Using an Impedance-Based Non-Destructive Testing Method for Multiple Structures.

The emergence of composite materials has revolutionized the approach to building engineering structures. With the number of applications for composites increasing every day, maintaining structural integrity is of utmost importance. For composites, adhesive bonding is usually the preferred choice over the mechanical fastening method, and monitoring for delamination is an essential factor in the field of composite materials. In this study, a non-destructive method known as the electromechanical impedance method is used with an approach of monitoring multiple areas by specifying certain frequency ranges to correspond to a certain test specimen. Experiments are conducted using various numbers of stacks created by attaching glass fiber epoxy composite plates onto one another, and two different debonding damage types are introduced to evaluate the performance of the multiple monitoring electromechanical impedance method.