[Investigation of Cytotoxic and Antileishmanial Activity of Hybrid Silver Nanoparticle Complexes: Potential Drug Candidates against Leishmania Species]. / Hibrit Gümüs Nanoparçacik Komplekslerinin Sitotoksik ve Antilaysmanyal Aktivitesinin Arastirilmasi: Leishmania Türlerine Karsi Potansiyel Ilaç Adaylari.

In recent years, isolation of resistant Leishmania species to drugs in use has made it necessary to search alternative molecules that may be drug candidates. In this study, it was aimed to investigate the cytotoxic and in vitro antileishmanial activity of hybrid silver nanoparticle (AgNP) complexes. In this study, three types of nanoparticles (NPs), oxidized amylose-silver (OA-Ag) NPs, oxidized amylose-curcumin (OA-Cur) NPs and oxidized amylose-curcumin-silver (OA-CurAgNP) nanoparticles were synthesized. The cytotoxic activity of the synthesized nanoparticles was determined against L929 mouse fibroblasts and the in vitro antileishmanial activity was determined against Leishmania tropica, Leishmania infantum and Leishmania donovani isolates by the broth microdilution method. It was observed that the hybrid OA-CurAgNP complex obtained by combining curcumin and silver nanoparticles showed cytotoxic effects against L929 mouse fibroblasts at concentrations of 1074 µg/mL and above. IC50 values expressing the antileishmanial activity of the hybrid OA-CurAgNP complex against L.tropica, L.infantum and L.donovani isolates, were found to vary between 95-121 µg/mL, 202-330 µg/mL and 210-254 µg/mL, respectively. Resistance development has emerged as a major challenge in the treatment of leishmaniasis in recent times. Metallic nanoparticles are considered excellent candidates for medical applications due to their chemical and physical properties, as well as their prolonged circulation in the body. The current drugs used for leishmaniasis treatment are highly toxic, while nanoparticles offer advantages such as low toxicity and easy cellular uptake due to their nanoscale dimensions. The identification of strong efficacy in these particles may contribute scientific evidence for their potential use in leishmaniasis treatment. Therefore, the therapeutical value of OA-CurAgNP complex alone in combination with existing drugs should be examined.

Removal of Cd(II), Co(II), Cr(III), Ni(II), Pb(II) and Zn(II) ions from wastewater using polyethyleneimine (PEI) cryogels.

The removal of the target analytes, Cd(II), Co(II), Cr(III), Ni(II), Pb(II), and Zn(II) from contaminated waters was achieved using super porous polyethyleneimine (PEI) cryogels as adsorbent. The optimum values of the sample pH and contact time were determined as 4.0 and 90 min, respectively, for the removal of the analytes. The adsorption capacities of the sorbent were between 19.88 and 24.39 mgg-1 from 10 mL of 50 mgL-1 target metal ion solutions. The sorption kinetics of metal ions were fitted with the pseudo-second-order model. The adsorption isotherms of the target analytes into PEI cryogel were well-fitted to the Langmuir isotherm model as expected from the material homogeneity. The selectivity of the PEI cryogel in the presence of Na+, Ca2+, Mg2+, NO3-, K+ and Cl- ions even at high concentrations was tested, and the tolerance limits were satisfactory enough, e.g., the adsorption of the target analytes was even not affected in the presence of 2000 mgL-1 Ca2+, K+, Na+, Cl- and 5000 mgL-1 NO3- ions. The PEI cryogels were successfully utilized in different industrial wastewater samples that were spiked with a known amount of analytes. The removal of the analytes from wastewater samples was in the following ranges 91.94-99.86% for Cd(II), 89.59-99.89% for Co(II), 80.35-99.76% for Cr(III), 92.02-99.84% for Ni(II), 83.28-99.86% for Pb(II), and 82.94-98.24% for Zn(II), respectively. The presented novel removal strategy offers a selective, efficient, and easy application for target metal ions from industrial wastewater samples.

A novel and simple approach to element fractionation analysis: Single step fractionation of milk.

A novel single step fractionation of cow's milk was achieved using ethyl ether, n-hexane and isopropyl alcohol (3:3:4) mixture via solubility difference and precipitation. Milks were separated into lipid, serum and protein fractions. The distribution of elements was determined by ICP OES and validated by the analysis of NIST-1549a. The applicability of the scheme was tested by the analysis of whole, skimmed, semi-skimmed and infant formula. The distribution tendency of each element was variable. The lipid and protein bound element concentrations ranged from 0.053 to 5.3 mg L-1 and 0.046-1111.2 mg L-1, respectively, whereas it was between 0.064 and 954.5 mg L-1 for the serum fraction. The trend of element distributions were in the order: protein > serum > lipid for the most elements, except for Mg, Na and K. This study provide practical and innovative way to elucidate the distribution of elements which may provide information to be applied in health and nutrition strategies.

Schiff base functionalized silica gel for simultaneous separation and preconcentration of Cu(II), Ni(II), and Cd(II) in pharmaceuticals and water samples.

A method for separation and preconcentration of Cu(II), Ni(II), and Cd(II) using N-N'-bis(5-methoxsalicylidene)-2-hydroxy-1,3-propanediamine modified silica gel was improved for aqueous samples and pharmaceuticals. Determination of the analytes was achieved by inductively coupled plasma optic emission spectrometry. The experimental conditions including pH value, sample volume, eluent type and volume, sorbent mass, sample, and eluent flow rates were optimized with univariate and multivariate optimization tools. The relative standard deviations of the method were 2.9% for Cu(II), 3.0% for Ni(II), and 3.3% for Cd(II) with recovery values between 98.8 ± 3.2-101.5 ± 3.0%. The limits of detection were found to be 62.4, 39.5, and 28.2 ng L-1 for Cu(II), Ni(II), and Cd(II), respectively. The accuracy of the suggested procedure was tested with the certified reference material (Certipur ICP multi-element standard solution IV) and addition-recovery experiments. The method was successfully applied to eye drop, anesthetic, serum, tap water, mineral water, and spring water samples.

A novel vortex assisted dispersive solid phase extraction of some trace elements in essential oils and fish oil.

In this paper, a novel vortex assisted solid phase extraction procedure combined with inductively coupled plasma optic emission spectrometry was presented for determination of Mn, Cu, Ni, Cr, Cd and Pb directly in oily matrix. The suggested separation and preconcentration method was based on simultaneous sorption of the target analytes from real essential oil matrix onto γ-Al2O3 functionalized with fluorescein (Al-Flr) and transfer to aqueous eluent prior to quantification. The effect of different parameters including sorption and elution time, sample volume, eluent type and concentration and interfering ions were investigated. The working conditions were given as follows, vortex agitation for sorption and elution 40 s, sample volume 20 mL, eluent type HCl, eluent concentration 0.3 mol L-1. The detection limits were found to be 0.7 µg L-1 for Mn, 4.1 µg L-1 for Cu, 1.0 µg L-1 for Ni, 1.6 µg L-1 for Cr, 0.7 µg L-1 Cd and 1.0 µg L-1 Pb. The evaluation of the accuracy and precision of the method was tested via metallo-organic certified reference material. The recovery values have warranted the accuracy and found between 98.4 and 103.3% with 2.6-6.4% relative standard deviation (RSD, %). The sampling frequency of the procedure was calculated as 11.25 h-1. Finally, the proposed analytical method was successfully applied on analyte spiked and unspiked apricot, black cumin, pine turpentine, thyme, mint essential oils and fish oil samples without any need of performing mineralization pretreatments.

Preconcentration of Cu(II), Co(II), and Ni(II) using an Optimized Enrichment Procedure: Useful and Alternative Methodology for Flame Atomic Absorption Spectrometry.

In this paper, a new solid phase extraction procedure is described for Cu(II), Co(II), and Ni(II). Silica gel which was coated with N,N'-bis(4-methoxysalicylidene) ethylenediamine (MSE) is used as a sorbent. Three independent variables were optimized using central composite design (CCD) for sorption and elution of metal ions. The optimum values of sorption and elution variables allowed simultaneous preconcentration of the ions in same conditions as follows, for sorption, pH 6.9, flow rate 5.4 mL min(-1), sample volume 50.0 mL, and for elution, flow rate 2.6 mL min(-1), eluent concentration 1.0 mol L(-1), eluent volume 5.0 mL. The detection limits (LOD) were found to be 1.1 µg L(-1) for Cu(II), 7.4 µg L(-1) for Co(II), and 7.5 µg L(-1) for Ni(II) and preconcentration factor was 200 for each of the ions. The accuracy of the method was tested with Lake Ontario water and multi-element standard solution. The proposed method was also applied to various water samples. The proposed method can be alternatively suggested as accurate, precise, easy, and a cheap method for Cu(II), Co(II), and Ni(II) determination.

Extraction of nickel from edible oils with a complexing agent prior to determination by FAAS.

In the present work, a new extraction method for separation of nickel from edible oils and determination by FAAS is reported. This method is based on extraction of Ni(II) ions from the oil to aqueous phase with N,N'-bis(4-methoxysalicylidene) ethylenediamine (MSE) and determination by FAAS. Properties of the complex formed between MSE and Ni(II) were investigated spectrophotometrically. Central composite design (CCD) was utilized for optimization of MSE to oil, stirring time and temperature, which were 0.97 mL g(-1), 15.4 min, and 29.7°C, respectively. The developed method was tested with an oil-based metal standard and the recovery was 93.8±3.9%. The proposed method was applied with five different edible oils.