Formation of methane nano-bubbles during hydrate decomposition and their effect on hydrate growth.

Molecular dynamic simulations are performed to study the conditions for methane nano-bubble formation during methane hydrate dissociation in the presence of water and a methane gas reservoir. Hydrate dissociation leads to the quick release of methane into the liquid phase which can cause methane supersaturation. If the diffusion of methane molecules out of the liquid phase is not fast enough, the methane molecules agglomerate and form bubbles. Under the conditions of our simulations, the methane-rich quasi-spherical bubbles grow to become cylindrical with a radius of ∼11 Å. The nano-bubbles remain stable for about 35 ns until they are gradually and homogeneously dispersed in the liquid phase and finally enter the gas phase reservoirs initially set up in the simulation box. We determined that the minimum mole fraction for the dissolved methane in water to form nano-bubbles is 0.044, corresponding to about 30% of hydrate phase composition (0.148). The importance of nano-bubble formation to the mechanism of methane hydrate formation, growth, and dissociation is discussed.

Why ice-binding type I antifreeze protein acts as a gas hydrate crystal inhibitor.

Antifreeze proteins (AFPs) prevent ice growth by binding to a specific ice plane. Some AFPs have been found to inhibit the formation of gas hydrates which are a serious safety and operational challenge for the oil and gas industry. Molecular dynamics simulations are used to determine the mechanism of action of the winter flounder AFP (wf-AFP) in inhibiting methane hydrate growth. The wf-AFP adsorbs onto the methane hydrate surface via cooperative binding of a set of hydrophobic methyl pendant groups to the empty half-cages at the hydrate/water interface. Each binding set is composed of the methyl side chain of threonine and two alanine residues, four and seven places further down in the sequence of the protein. Understanding the principle of action of AFPs can lead to the rational design of green hydrate inhibitor molecules with potential superior performance.

Molecular modeling of the dissociation of methane hydrate in contact with a silica surface.

We use constant energy, constant volume (NVE) molecular dynamics simulations to study the dissociation of the fully occupied structure I methane hydrate in a confined geometry between two hydroxylated silica surfaces between 36 and 41 Å apart, at initial temperatures of 283, 293, and 303 K. Simulations of the two-phase hydrate/water system are performed in the presence of silica, with and without a 3 Å thick buffering water layer between the hydrate phase and silica surfaces. Faster decomposition is observed in the presence of silica, where the hydrate phase is prone to decomposition from four surfaces, as compared to only two sides in the case of the hydrate/water simulations. The existence of the water layer between the hydrate phase and the silica surface stabilizes the hydrate phase relative to the case where the hydrate is in direct contact with silica. Hydrates bound between the silica surfaces dissociate layer-by-layer in a shrinking core manner with a curved decomposition front which extends over a 5-8 Å thickness. Labeling water molecules shows that there is exchange of water molecules between the surrounding liquid and intact cages in the methane hydrate phase. In all cases, decomposition of the methane hydrate phase led to the formation of methane nanobubbles in the liquid water phase.