Evaluation of the performance of the IQ-Check kits and the USDA Microbiology Laboratory Guidebook methods for detection of Shiga toxin-producing Escherichia coli (STEC) and STEC and Salmonella simultaneously in ground beef.

AIMS: To evaluate the performance of the IQ-Check kits and the USDA Microbiology Laboratory Guidebook (MLG) methods for detection of the top seven Shiga toxin-producing Escherichia coli (STEC) (O157:H7, O26, O45, O103, O111, O121 and O145) in ground beef and both STEC and Salmonella in co-inoculated samples. METHODS AND RESULTS: Ground beef samples inoculated with ~10 CFU of STEC or both STEC and Salmonella Typhimurium were stored at 4°C for 72 h, followed by screening with the IQ-Check and BAX System kit (MLG) methods that employ different enrichment media. STEC and S. Typhimurium were detected after 12 and 18 h and their presence was confirmed by colony isolation. CONCLUSIONS: Both methods were able to detect STEC in ground beef after 12 h of enrichment in samples inoculated with low levels of the pathogen. STEC and S. Typhimurium can be detected and isolated in co-inoculated ground beef samples. SIGNIFICANCE AND IMPACT OF THE STUDY: The IQ-Check methods are comparable to the MLG methods for detection of STEC and simultaneous detection of STEC and S. Typhimurium in seeded ground beef after a short enrichment time, thus the IQ-Check method can be useful for the food industry for rapid detection of these pathogens.

Shiga toxin-producing E. coli (STEC) in swine: prevalence over the finishing period and characteristics of the STEC isolates.

This descriptive longitudinal study was conducted to investigate the faecal shedding of Shiga toxin-producing E. coli (STEC) in finishing swine and to characterize the swine STEC isolates that were recovered. Three cohorts of finishing swine (n = 50/cohort; total 150 pigs) were included in the longitudinal study. Individual faecal samples were collected every 2 weeks (8 collections/pig) from the beginning (pig age 10 weeks) to the end (pig age 24 weeks) of the finishing period. STEC isolates were recovered in at least one sample from 65·3% (98/150) of the pigs, and the frequency distribution of first-time STEC detection during the finishing period resembled a point-source outbreak curve. Nineteen O:H serotypes were identified among the STEC isolates. Most STEC isolates (n = 148) belonged to serotype O59:H21 and carried the stx 2e gene. One O49:H21 STEC isolate carried the stx 2e and eae genes. High prevalence rates of STEC during the finishing period were observed, and STEC isolates in various non-O157 serogroups were recovered. These data enhance understanding of swine STEC epidemiology, and future research is needed to confirm whether or not swine STEC are of public health concern.

Modeling the lag phase of Listeria monocytogenes.

An estimate of the lag phase duration is an important component for predicting the growth of a bacterium and for creating process models and risk assessments. Most current research and data for predictive modeling programs initiated growth studies with cells grown to the stationary phase in a favorable pH, nutrient and temperature environment. In this work, Listeria monocytogenes Scott A cells were grown in brain heart infusion (BHI) broth at different temperatures from 4 to 37 degrees C to the exponential growth or stationary phases. Additional cells were suspended in a dilute broth, desiccated or frozen. These cells were then transferred to BHI broth at various temperatures from 4 to 37 degrees C and the lag phase durations were determined by enumerating cells at appropriate time intervals. Long lag phases were observed for cells initially grown at high temperatures and transferred to low temperatures. In general, exponential growth cells had the shortest lag phases, stationary phase and starved cells had longer, frozen cells had slightly longer and desiccated cells had the longest lag phases. These data were from immediate temperature transitions. When a computer-controlled water bath linearly changed the temperature from 37 to 5 degrees C over a 3.0- or 6.0-h period, the cells had short lags and grew continuously with declining growth rates. Transitions of 0.75 or 1.0 h had 20-h lag phases, essentially that of immediate transitions. When the transition was 1.5 h, an intermediate pattern of less than 1 log of growth followed by no additional growth for 20 h occurred.

Comparison of an immunochromatographic method and the TaqMan E. coli O157:H7 assay for detection of Escherichia coli O157:H7 in alfalfa sprout spent irrigation water and in sprouts after blanching.

An immunochromatographic-based assay (Quixtrade mark E. coli O157 Sprout Assay) and a polymerase chain reaction (PCR)-based assay (TaqMan E. coli O157:H7 Kit) were used to detect Escherichia coli O157:H7 strain 380-94 in spent irrigation water from alfalfa sprouts grown from artificially contaminated seeds. Ten, 25, 60, or 100 seeds contaminated by immersion for 15 min in a suspension of E. coli O157:H7 at concentrations of 10(6) or 10(8) cfu/ml were mixed with 20 g of non-inoculated seeds in plastic trays for sprouting. The seeds were sprayed with tap water for 15 s every hour and spent irrigation water was collected at intervals and tested. E. coli O157:H7 was detected in non-enriched water by both the TaqMan PCR (30 of 30 samples) and the immunoassay (9 of 24 samples) in water collected 30 h from the start of the sprouting process. However, enrichment of the spent irrigation water in brain heart infusion (BHI) broth at 37 degrees C for 20 h permitted detection of E. coli O157:H7 in water collected 8 h from the start of sprouting using both methods, even in trays containing as few as 10 inoculated seeds. The TaqMan PCR assay was more sensitive (more positive samples were observed earlier in the sprouting process) than the immunoassay; however, the immunoassay was easier to perform and was more rapid. At 72 h after the start of the sprouting process, the sprouts were heated at 100 degrees C for 30 s to determine the effectiveness of blanching for inactivation of E. coli O157:H7. All of the 32 samples tested with the TaqMan assay and 16 of 32 samples tested with the Quixtrade mark assay gave positive results for E. coli O157:H7 after enrichment of the blanched sprouts at 37 degrees C for 24 h. In addition, the organism was detected on Rainbow Agar O157 in 9 of 32 samples after 24 h of enrichment of the blanched sprouts. In conclusion, E. coli O157:H7 was detected in spent irrigation water collected from sprouts grown from artificially contaminated seeds by both the TaqMan and Quixtrade mark assays. The data also revealed that blanching may not be effective to completely inactivate all the E. coli O157:H7 that may be present in sprouts.

A multiplex polymerase chain reaction assay for rapid detection and identification of Escherichia coli O157:H7 in foods and bovine feces.

A multiplex polymerase chain reaction (PCR) assay was designed to simplify detection of Escherichia coli O157:H7 and to identify the H serogroup and the type of Shiga toxin produced by this bacterium. Primers for a plasmid-encoded hemolysin gene (hly933), and chromosomal flagella (fliCh7; flagellar structural gene of H7 serogroup), Shiga toxins (stx1, stx2), and attaching and effacing (eaeA) genes were used in a multiplex PCR for coamplification of the corresponding DNA sequences from enterohemorrhagic E. coli (EHEC) O157:H7. Enrichment cultures of ground beef, blue cheese, mussels, alfalfa sprouts, and bovine feces, artificially inoculated with various levels of E. coli O157:H7 strain 933, were subjected to a simple DNA extraction step prior to the PCR, and the resulting amplification products were analyzed by agarose gel electrophoresis. Sensitivity of the assay was < or = 1 CFU/g of food or bovine feces (initial inoculum level), and results could be obtained within 24 h. Similar detection levels were obtained with ground beef samples that underwent enrichment culturing immediately after inoculation and samples that were frozen or refrigerated prior to enrichment. The multiplex PCR facilitates detection of E. coli O157:H7 and can reduce the time required for confirmation of isolates by up to 3 to 4 days.

Expansion of response surface models for the growth of Escherichia coli O157:H7 to include sodium nitrite as a variable.

The previously published (Buchanan et al., 1993a) response surface models for estimating the aerobic and anaerobic growth of Escherichia coli O157:H7 as a function of temperature, initial pH, and sodium chloride content have been expanded to include sodium nitrite as a further variable. A fractional factorial design was employed to quantitate the effect of NaNO2 in conjunction with the four other variables by culturing a three-strain mixture in brain heart infusion broth. The activity of NaNO2 was strongly pH-dependent, with inhibition being significant at pH values < or = 5.5 and enhanced by lowering the incubation temperature. The effects of the variables on Escherichia coli O157:H7 growth kinetics were modeled by response surface analysis using quadratic and cubic polynomial models of the natural logarithm transformation of both the Gompertz B and M parameters (Gompertz parameters) and the lag phase duration (LPD) and generation time (GT) values (kinetics parameters) calculated for individual growth curves. All models provided reasonable estimates for most variable combinations; however, comparisons of predicted versus observed values indicated that overall the most useful models were the cubic models based on LPD and GT values. Although additional validation of the models is required, comparisons of predicted times to a 1000-fold increase in population density against those calculated from previously published growth studies indicate that the models are an effective means for acquiring 'first estimates' of the growth characteristics of E. coli O157:H7.