Broadband wavelength and angle-resolved scattering characterization for nanophotonics investigations.

The characterization of scattered light is complex and relatively nonstandardized despite being of great importance to many optical technologies. While total scatter can be efficiently measured using integrating-sphere-based techniques, a detailed determination of the full bidirectional scattering distribution function is far more challenging, often requiring complicated and expensive equipment as well as substantial measurement time. Due to this, many research groups rely on simpler, angle-resolved scattering (ARS) measurements, yet these are typically carried out using a single wavelength source, therefore providing limited information. Here, we demonstrate a custom-built broadband angle-resolved optical spectrometer, which utilizes a supercontinuum white light laser source combined with a custom automated goniometer and a Si CCD array spectrometer in order to carry out broad spectral measurements of ARS. The use of a collimated supercontinuum allows for small area measurements that are often crucial for investigation of nanophotonic samples created using expensive fabrication techniques. The system has been tested and calibrated, and accuracy and reproducibility have been verified by integrating wavelength and ARS data over the angular range and comparing to calibrated integrating sphere measurements.

Helium ion beam milling to create a nano-structured domain wall magnetoresistance spin valve.

We have fabricated and measured single domain wall magnetoresistance devices with sub-20 nm gap widths using a novel combination of electron beam lithography and helium ion beam milling. The measurement wires and external profile of the spin valve are fabricated by electron beam lithography and lift-off. The critical bridge structure is created using helium ion beam milling, enabling the formation of a thinner gap (and so a narrower domain wall) than that which is possible with electron beam techniques alone. Four-point probe resistance measurements and scanning electron microscopy are used to characterize the milled structures and optimize the He ion dose. Successful operation of the device as a spin valve is demonstrated, with a 0.2% resistance change as the external magnetic field is cycled. The helium ion beam milling efficiency as extracted from electrical resistance measurements is 0.044 atoms/ion, about half the theoretical value. The gap in the device is limited to a maximum of 20 nm with this technique due to sub-surface swelling caused by injected ions which can induce catastrophic failure in the device. The fine patterning capabilities of the helium ion microscope milling technique indicate that sub-5 nm constriction widths could be possible.

Broken time reversal of light interaction with planar chiral nanostructures.

We report unambiguous experimental evidence of broken time-reversal symmetry for the interaction of light with an artificial nonmagnetic material. Polarized color images of planar chiral gold-on-silicon nanostructures consisting of arrays of gammadions show intriguing and unusual symmetry: structures, which are geometrically mirror images, lose their mirror symmetry in polarized light. The symmetry of images can be described only in terms of antisymmetry (black-and-white symmetry) appropriate to a time-odd process. The effect results from a transverse chiral nonlocal electromagnetic response of the structure and has some striking resemblance with the expected features of light scattering on anyon matter.

Optical manifestations of planar chirality.

We report that planar chiral structures affect the polarization state of light in a manner similar to three-dimensional chiral (optical active) media. In experiments with artificial metal-on-silicon chiral planar gratings of 442 wallpaper group symmetry, containing millions of chiral elements per square centimeter, we observed rotation of the polarization azimuth in excess of 30 degrees of light diffracted from it. The rotation was found to change its sign for two enantiomeric forms of the media and to have components associated with both the structural arrangement and the chirality of individual structural elements.

Microcavity lasing of optically excited cadmium sulfide thin films at room temperature.

We report what is believed to be the first observation of lasing of an optically pumped thin CdS film formed by laser ablation on glass. Laser action is observed at room temperature, and the emission peak is at 501 nm. X-ray diffraction shows that the polycrystalline films are of wurtzite structure and have (002) preferred orientation. Fabry-Perot laser modes are spaced 16 nm apart, indicating a cavity length of 2.9mum . The cavity is formed by consistently self-formed microcavities within the hexagonal lattice.