ABSTRACT
Optical parametric chirped-pulse amplification (OPCPA) using high-energy Nd:glass lasers has the potential to produce ultra-intense pulses (>1023 W/cm2). We report on the performance of the final high-efficiency amplifier in an OPCPA system based on large-aperture (63 × 63-mm2) partially deuterated potassium dihydrogen phosphate (DKDP) crystals. The seed beam (180-nm bandwidth, 110 mJ) was provided by the preceding OPCPA stages. A maximum pump-to-signal conversion efficiency of 41% and signal energy up to 13 J were achieved with a 52-mm-long DKDP crystal due to the flattop super-Gaussian pump beam profile and flat-in-time pulse shape.
ABSTRACT
We present a theoretical and experimental analysis of the signal phase introduced by the pump-beam wavefront and spatial profile during optical parametric amplification (OPA) process. The theory predicts the appearance of an additional wavefront in the amplified signal beam that is proportional to the spatial derivative of the pump-beam wavefront. The effect of the pump-beam profile on the signal-beam wavefront is also investigated. Our experiments tested these theoretical predictions by comparing the wavefront of the signal beam before and after amplification in a multi-joule broadband OPA. The measured signal wavefront was shown to have the expected dependence on the pump-beam profile and wavefront. These results can be considered when designing petawatt-scale ultrabroadband optical parametric chirped-pulse-amplification systems.
ABSTRACT
The multiterawatt (MTW) laser, built initially as the prototype front end for a petawatt laser system, is a 1053 nm hybrid system with gain from optical parametric chirped-pulse amplification (OPCPA) and Nd:glass. Compressors and target chambers were added, making MTW a complete laser facility (output energy up to 120 J, pulse duration from 20 fs to 2.8 ns) for studying high-energy-density physics and developing short-pulse laser technologies and target diagnostics. Further extensions of the laser support ultrahigh-intensity laser development of an all-OPCPA system and a Raman plasma amplifier. A short summary of the variety of scientific experiments conducted on MTW is also presented.
ABSTRACT
We describe the design and alignment of an unobscured reflective image relay for use in an ultra-broadband half-petawatt laser system in development at the University of Rochester's Laboratory for Laser Energetics. The design consists of four spherical mirrors in an unobscured configuration. We show the theoretical basis for such a four-mirror design using first-order optical matrix methods and nodal aberration theory. We also describe the process of aligning this design in a test bed and show the results of this alignment method. We were able to achieve a diffraction-limited nominal design. Upon aligning the design in our test bed, we were able to successfully align the design to achieve our target wavefront error of less than 0.3 waves peak to valley and 0.07 waves rms at the central laser-operating wavelength of 910 nm.
ABSTRACT
Quantitative wavefront measurements are demonstrated using a Hartmann mask re-imaged onto a camera. The wavefront is reconstructed using standard algorithms applied to the difference of beamlet centroids determined from fluence distributions obtained for two different longitudinal locations of the mask. The wavefront of the optical wave in the object plane is measured independently of imaging-system collimation. Apodization obtained with spatially dithered distributions of small transparent or opaque pixels improves the measurement accuracy by reducing the spatial-frequency content of the mask holes. Simulations and experiments demonstrate the excellent accuracy of this diagnostic over a wide range of parameters, making it suitable, for example, to characterize laser systems.
ABSTRACT
Spatio-temporal coupling in the field of ultrashort optical pulses is a technical enabler for applications but can result in detrimental effects such as increased on-target pulse duration and decreased intensity. Spectrally resolved spatial-phase measurements of a broadband field are demonstrated using a custom multispectral camera combined with two different wavefront sensors: a multilateral spatial shearing interferometer based on an amplitude checkerboard mask and an apodized imaged Hartmann sensor. The spatially and spectrally resolved phase is processed to quantify the commonly occurring pulse-front tilt and radial group delay, which are experimentally found to be in good agreement with models.
ABSTRACT
Target-plane intensities on the short-pulse beamlines of OMEGA EP, a petawatt-class laser, are characterized on-shot using the focal-spot diagnostic (FSD), an indirect wavefront-based measurement. Phase-retrieval methods are employed using on-shot and offline camera-based far-field measurements to improve the wavefront measurements and yield more-accurate, repeatable focal-spot predictions. Incorporation of these techniques has improved the mean cross-correlation between the FSD predictions and direct far-field fluence measurements in the target chamber from 0.78 to 0.94.
ABSTRACT
An on-shot focal-spot diagnostic for characterizing high-energy, petawatt-class laser systems is presented. Accurate measurements at full energy are demonstrated using high-resolution wavefront sensing in combination with techniques to calibrate on-shot measurements with low-power sample beams. Results are shown for full-energy activation shots of the OMEGA EP Laser System.
Subject(s)
Equipment Failure Analysis/instrumentation , Lasers , Photometry/instrumentation , Radiometry/instrumentation , Equipment Design , Light , Radiation Dosage , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
We generated a record peak intensity of 0.7 x 10(22) W/cm2 by focusing a 45-TW laser beam with an f/0.6 off-axis paraboloid. The aberrations of the paraboloid and the low-energy reference laser beam were measured and corrected, and a focal spot size of 0.8 microm was achieved. It is shown that the peak intensity can be increased to 1.0 x 10(22) W/cm2 by correction of the wave front of a 45-TW beam relative to the reference beam. The phase and amplitude measurement provides for an efficient full characterization of the focal field.
