Spectral Characteristics and Displacement Sensing of U-Shaped Single-Mode-Multimode-Single-Mode Fiber Structure.

The U-shaped fiber configuration represents the elementary form of micro-displacement sensing, characterized by its exceptional freedom and flexibility. The study proposes the U-shaped bent single-mode-multimode-single-mode (SMS) fiber structure that integrates the multimode interference (MMI) effect for enhanced mode dispersion and the Mach-Zönder interference (MZI) effect for spectral sensitivity improvement. The transmission spectral properties of the U-shaped SMS fiber structure with a bent radius over 1 cm are experimentally measured as the change in displacement varied within the range of 5 mm in this work. As the radius decreases, the spectrum shows redshift, which is related to the central wavelength of the peak or dips-a smaller wavelength results in a stronger redshift for the same displacement change. The average sensitivity of micro-displacement measurement within a range of 5 mm is 5.41 pm/µm, and the linearity is 99.62%. The maximum sensitivity of U-shaped SMS fiber structure is 34.46 pm/µm, with the minimum displacement change of approximately 5.804 nm. The transmission spectral properties of the U-shaped SMS fiber structure within the ranges of 50 µm, 500 µm, and 5 mm are experimentally measured in this work. This experiment observed a relatively uniform spectral drift pattern in a large range of micro-displacement sensing. The measurement range is limited by the limited spectral range of the light source and the discontinuous variation in the effective refractive index. This provides an experimental reference for further understanding the characteristics of U-shaped fiber structures and applying its application in micro-displacement sensing.

Dental Pulp Stem Cells for Bone Tissue Engineering: A Literature Review.

Bone tissue engineering (BTE) is a promising approach for repairing and regenerating damaged bone tissue, using stem cells and scaffold structures. Among various stem cell sources, dental pulp stem cells (DPSCs) have emerged as a potential candidate due to their multipotential capabilities, ability to undergo osteogenic differentiation, low immunogenicity, and ease of isolation. This article reviews the biological characteristics of DPSCs, their potential for BTE, and the underlying transcription factors and signaling pathways involved in osteogenic differentiation; it also highlights the application of DPSCs in inducing scaffold tissues for bone regeneration and summarizes animal and clinical studies conducted in this field. This review demonstrates the potential of DPSC-based BTE for effective bone repair and regeneration, with implications for clinical translation.

The mechanical and clinical influences of prosthetic index structure in Morse taper implant-abutment connection: a scoping review.

AIM: The implant-abutment connection is a crucial factor in determining the long-term stability of dental implants. The use of a prosthetic index structure in the Morse taper implant-abutment connection has been proposed as a potential solution to improve the accuracy of this connection. This study aimed to provide a scoping review of the mechanical and clinical effects of the prosthetic index structure in the Morse taper implant-abutment connection. METHODS: A systematic scoping review of articles related to "dental implants," "Morse taper," and "index" was conducted using PubMed/MEDLINE, Web of Science, Cochrane, and Scopus databases, as well as a comprehensive literature search by two independent reviewers. Relevant articles were selected for analysis and discussion, with a specific focus on investigating the impact of prosthetic index structure on the mechanical and clinical aspects of Morse taper implant-abutment connections. RESULTS: Finally, a total of 16 articles that met the inclusion criteria were included for data extraction and review. In vitro studies have demonstrated that the use of a prosthetic index structure in the Morse taper implant-abutment connection can affect stress distribution, biomechanical stability, and reverse torque values, which may reduce stress within cancellous bone and help limit crestal bone resorption. However, retrospective clinical studies have shown that this structure is also associated with a higher risk of mechanical complications, such as abutment fracture and abutment screw loosening. CONCLUSIONS: Therefore, the clinical trade-off between preventing crestal bone resorption and mechanical complications must be carefully considered when selecting appropriate abutments. The findings suggest that this structure can improve the accuracy and stability of the implant-abutment connection, but its use should be carefully evaluated in clinical practice.

Alveolar ridge preservation in sockets with severe periodontal destruction using autogenous partially demineralized dentin matrix: A randomized controlled clinical trial.

BACKGROUND: The preservation and reconstruction of alveolar ridge volume in extraction sockets of molars affected by severe periodontitis is a critical challenge that requires clinical attention. PURPOSE: This randomized controlled clinical trial was designed to evaluate the efficiency of autogenous partially demineralized dentin matrix (APDDM) for alveolar ridge preservation (ARP) in severely periodontally compromised sockets compared to spontaneous healing (SH) on radiographic and histomorphometric outcomes. MATERIALS AND METHODS: Thirty-two patients with 32 periodontally compromised molars were randomized into either the test group, which received ARP using APDDM covered with a collagen sponge, or the control group, which underwent SH. Linear and volumetric changes were assessed using superimposed cone-beam computed tomography (CBCT) acquired pre-extraction and after a 4-month healing time. Histomorphometric evaluation was performed on trephine cores harvested during implant placement. RESULTS: All sites healed uneventfully. The ridge width at 1 mm apical to the bone crest increased by 5.03, 4.50, and 5.20 mm in the mesial, middle, distal area in the APDDM group, while decreasing by -1.98, -2.19, and -1.98 mm in the SH group, respectively (p < 0.05). The height increase of the central bone was significantly higher in the APDDM group than in the SH group (p < 0.05). The height decrease of the buccal (mesial, middle, distal) bone plate was lower in the APDDM group than in the SH group (p < 0.05). After a 4-month healing time, bone volume increased by 37.07% in the APDDM group and by only 2.33% in the SH group (p < 0.05). Histomorphometric analysis revealed that APDDM particles were surrounded by newly formed bone, with partially absorbed residual APDDM materials observed. New bone, APDDM remnants, and connective tissue occupied 39.67 ± 8.28%, 23.66 ± 9.22%, and 36.67 ± 17.05% of the areas in the APDDM group, respectively. CONCLUSIONS: ARP using APDDM was effective, resulting in a significant increase in both linear and volumetric changes in severely periodontally compromised extraction sockets compared to SH. These findings suggest that APDDM may serve as a promising new clinical option for the reconstruction of alveolar ridge dimensions.

The effect of an extra hydrophobic resin layer on the bond strength and durability of one-step universal adhesives used as a primer.

OBJECTIVES: To determine the effect of an extra hydrophobic resin layer (EHL) on the bond strength and durability of three different pH one-step universal adhesives (UAs) utilized in self-etch (SE) mode, and to explore whether UAs can be used as a primer in two-step bonding system. METHODS: Three different pH UAs were utilized: G-Premio Bond (GPB), Scotchbond Universal (SBU), All-Bond Universal (ABU), while the bonding agent of Clearfil SE Bond 2 (SE2) was selected as the EHL. For the EHL groups, EHL was applied after the air blow of each UA and before light curing. The microtensile bond strength (µTBS), fracture modes, interfacial structures and nanoleakage (NL) were evaluated after 24 h water storage and after 15,000 thermal cycling (TC). Elastic modulus (EM) and hardness (H) was tested by a nanoindenter after 24 h. RESULTS: Significantly higher µTBS was achieved in the GPB+EHL group compared with GPB both at 24 h and after 15,000 TC, while the additional use of EHL did not improve the µTBS of SBU and ABU significantly both at 24 h and after 15,000 TC. GPB+EHL demonstrated lower NL than GPB. The mean EM and H of the adhesive layer in GPB+EHL was significantly decreased compared with GPB. CONCLUSIONS: The results indicated that the bond strength and durability of low pH one-step UA (GPB) were significantly improved by additional application of EHL both at 24 h and after 15,000 TC, while no significant improvement was observed for ultra-mild one-step UAs (SBU and ABU). CLINICAL SIGNIFICANCE: This study indicates that GPB can be used as a primer in a two-step bonding system, while SBU and ABU may not be as effective. These findings may help guide clinicians in selecting the appropriate UAs and bonding techniques for different clinical scenarios.

Comparison the accuracy of a novel implant robot surgery and dynamic navigation system in dental implant surgery: an in vitro pilot study.

BACKGROUND: To compare the accuracy of dental implant placement using a novel dental implant robotic system (THETA) and a dynamic navigation system (Yizhimei) by a vitro model experiment. METHODS: 10 partially edentulous jaws models were included in this study, and 20 sites were randomly assigned into two groups: the dental implant robotic system (THETA) group and a dynamic navigation system (Yizhimei) group. 20 implants were placed in the defects according to each manufacturer's protocol respectively. The implant platform, apex and angle deviations were measured by fusion of the preoperative design and the actual postoperative cone-beam computed tomography (CBCT) using 3D Slicer software. Data were analyzed by t - test and Mann-Whitney U test, p < 0.05 was considered statistically significant. RESULTS: A total of 20 implants were placed in 10 phantoms. The comparison deviation of implant platform, apex and angulation in THETA group were 0.58 ± 0.31 mm, 0.69 ± 0.28 mm, and 1.08 ± 0.66° respectively, while in Yizhimei group, the comparison deviation of implant platform, apex and angulation were 0.73 ± 0.20 mm, 0.86 ± 0.33 mm, and 2.32 ± 0.71° respectively. The angulation deviation in THETA group was significantly smaller than the Yizhimei group, and there was no significant difference in the deviation of the platform and apex of the implants placed using THETA and Yizhimei, respectively. CONCLUSION: The implant positioning accuracy of the robotic system, especially the angular deviation was superior to that of the dynamic navigation system, suggesting that the THETA robotic system could be a promising tool in dental implant surgery in the future. Further clinical studies are needed to evaluate the current results.

The Effect of Geometric Parameters on Flow and Heat Transfer Characteristics of a Double-Layer Microchannel Heat Sink for High-Power Diode Laser.

The effect of the geometric parameters on the flow and heat transfer characteristics of a double-layer U-shape microchannel heat sink (DL-MCHS) for a high-power diode laser was investigated in this work. FLUENT 19.2 based on the finite volume method was employed to analyze the flow and heat transfer performance of DL-MCHS. A single variable approach was used to fully research the impact of different parameters (the number of channels, the channel cross-sectional shape, and the aspect ratio) on the temperature distribution, pressure drop, and thermal resistance of the DL-MCHS. The rectangular DL-MCHS heat transfer performance and pressure drop significantly increased with the rise in the channel's aspect ratio due to there being a larger wet perimeter and convective heat transfer area. By comparing the thermal resistance of the DL-MCHS at the same power consumption, it was found that the rectangular DL-MCHS with an aspect ratio in the range of 5.1180-6.389 had the best overall performance. With the same cross-sectional area and hydraulic diameter (AC = 0.36 mm, Dh = 0.417 mm), the thermal resistance of the trapezoidal microchannel heat sink was 32.14% and 42.42% lower than that of the triangular and rectangular ones, respectively, under the condition that the pumping power (Wpp) was 0.2 W. Additionally, the thermal resistance was reduced with the increment of the number of channels inside the DL-MCHS, but this would induce an increased pressure drop. Thus, the channel number has an optimal range, which is between 50 and 80 for the heat sinks in this study. Our study served as a simulation foundation for the semiconductor laser double-layer U-shaped MCHS optimization method using geometric parameters.

An Up-To-Date Overview of Dental Tissue Regeneration Using Dental Origin Mesenchymal Stem Cells: Challenges and Road Ahead.

Stem cells (SCs) research has experienced exponential growth in recent years. SC-based treatments can enhance the lives of people suffering from cardiac ischemia, Alzheimer's disease, and regenerative drug conditions, like bone or loss of teeth. Numerous kinds of progenitor/SCs have been hypothesized to depend on their potential to regain and/or heal wounded tissue and partly recover organ function. Growing data suggest that SCs (SCs) are concentrated in functions and that particular tissues have more SCs. Dental tissues, in particular, are considered a significant cause of mesenchymal stem cells (MSCs) cells appropriate for tissue regeneration uses. Tissue regeneration and SCs biology have particular attention in dentistry because they may give a novel method for creating clinical material and/or tissue redevelopment. Dental pulp, dental papilla, periodontal ligament, and dental follicle contain mesenchymal SCs. Such SCs, which must be identified and cultivated in specific tissue culture environments, may be used in tissue engineering applications such as tooth tissue, nerve regeneration, and bone redevelopment. A new cause of SCs, induced pluripotent SCs, was successfully made from human somatic cells, enabling the generation of the patient and disease-specific SCs. The dental SC's (DSCs) multipotency, rapid proliferation rate, and accessibility make it an ideal basis of MSC for tissue redevelopment. This article discusses current advances in tooth SC investigation and its possible application in tissue redevelopment.

Single-frequency 1.7-µm Tm-doped fiber laser with optical bistability of both power and longitudinal mode behavior.

The single-frequency operation of a thulium fiber laser at a short wavelength of 1720 nm is investigated in a ring resonator. Powerful single-longitudinal-mode operation was realized by utilizing an unpumped thulium-doped fiber as the saturable absorber. The fiber laser delivered 407 mW single-frequency output with a spectral linewidth of 4.4 kHz under 2.7-W launched pump power at 1570 nm, which turned to multi-longitudinal-mode operation at higher pump powers. Additionally, optical bistability of both output power and longitudinal mode behavior, originating from the saturable absorption effect, were observed and discussed. To the best of our knowledge, this is the first efficient 1.7-µm single-frequency fiber laser as well as the first demonstration of optical bistability in thulium-doped fiber lasers.

Efficient multi-watt 1720 nm ring-cavity Tm-doped fiber laser.

Using commercial Tm-doped silica fiber and 1570-nm in-band pump source, we demonstrated an efficient 1720-nm all-fiber laser with ring-cavity configuration. The theoretical model based on rate equations was built up to analyze the laser performance of Tm-doped fiber, which exhibits strong absorption in the 1.7-µm region. The results show that efficient laser operation can be achieved through the optimization of output coupling and the length of Tm-doped fiber. An experimental investigation was performed and agreed with the calculation. By using homemade couplers, we experimentally achieved 2.36-W laser output at 1720 nm under a 6-W launched pump. The slope efficiency with respect to the absorbed pump power and optical efficiency were 50.2% and 39.3%, respectively. Due to the employment of a ring resonator, a narrow laser linewidth of ∼4 GHz at maximum output power was observed.

Improving the acetic acid tolerance and fermentation of Acetobacter pasteurianus by nucleotide excision repair protein UvrA.

Acetic acid bacteria (AAB) are widely used in acetic acid fermentation due to their remarkable ability to oxidize ethanol and high tolerance against acetic acid. In Acetobacter pasteurianus, nucleotide excision repair protein UvrA was up-regulated 2.1 times by acetic acid when compared with that without acetic acid. To study the effects of UvrA on A. pasteurianus acetic acid tolerance, uvrA knockout strain AC2005-ΔuvrA, uvrA overexpression strain AC2005 (pMV24-uvrA), and the control strain AC2005 (pMV24), were constructed. One percent initial acetic acid was almost lethal to AC2005-ΔuvrA. However, the biomass of the UvrA overexpression strain was higher than that of the control under acetic acid concentrations. After 6% acetic acid shock for 20 and 40 min, the survival ratios of AC2005 (pMV24-uvrA) were 2 and 0.12%, respectively; however, they were 1.5 and 0.06% for the control strain AC2005 (pMV24). UvrA overexpression enhanced the acetification rate by 21.7% when compared with the control. The enzymes involved in ethanol oxidation and acetic acid tolerance were up-regulated during acetic acid fermentation due to the overexpression of UvrA. Therefore, in A. pasteurianus, UvrA could be induced by acetic acid and is related with the acetic acid tolerance by protecting the genome against acetic acid to ensure the protein expression and metabolism.

Acetobacter pasteurianus metabolic change induced by initial acetic acid to adapt to acetic acid fermentation conditions.

Initial acetic acid can improve the ethanol oxidation rate of acetic acid bacteria for acetic acid fermentation. In this work, Acetobacter pasteurianus was cultured in ethanol-free medium, and energy production was found to increase by 150% through glucose consumption induced by initial acetic acid. However, oxidation of ethanol, instead of glucose, became the main energy production pathway when upon culturing ethanol containing medium. Proteome assay was used to analyze the metabolism change induced by initial acetic acid, which provided insight into carbon metabolic and energy regulation of A. pasteurianus to adapt to acetic acid fermentation conditions. Results were further confirmed by quantitative real-time PCR. In summary, decreased intracellular ATP as a result of initial acetic acid inhibition improved the energy metabolism to produce more energy and thus adapt to the acetic acid fermentation conditions. A. pasteurianus upregulated the expression of enzymes related to TCA and ethanol oxidation to improve the energy metabolism pathway upon the addition of initial acetic acid. However, enzymes involved in the pentose phosphate pathway, the main pathway of glucose metabolism, were downregulated to induce a change in carbon metabolism. Additionally, the enhancement of alcohol dehydrogenase expression promoted ethanol oxidation and strengthened the acetification rate, thereby producing a strong proton motive force that was necessary for energy production and cell tolerance to acetic acid.

Effect of aspartic acid and glutamate on metabolism and acid stress resistance of Acetobacter pasteurianus.

BACKGROUND: Acetic acid bacteria (AAB) are widely applied in food, bioengineering and medicine fields. However, the acid stress at low pH conditions limits acetic acid fermentation efficiency and high concentration of vinegar production with AAB. Therefore, how to enhance resistance ability of the AAB remains as the major challenge. Amino acids play an important role in cell growth and cell survival under severe environment. However, until now the effects of amino acids on acetic fermentation and acid stress resistance of AAB have not been fully studied. RESULTS: In the present work the effects of amino acids on metabolism and acid stress resistance of Acetobacter pasteurianus were investigated. Cell growth, culturable cell counts, acetic acid production, acetic acid production rate and specific production rate of acetic acid of A. pasteurianus revealed an increase of 1.04, 5.43, 1.45, 3.30 and 0.79-folds by adding aspartic acid (Asp), and cell growth, culturable cell counts, acetic acid production and acetic acid production rate revealed an increase of 0.51, 0.72, 0.60 and 0.94-folds by adding glutamate (Glu), respectively. For a fully understanding of the biological mechanism, proteomic technology was carried out. The results showed that the strengthening mechanism mainly came from the following four aspects: (1) Enhancing the generation of pentose phosphates and NADPH for the synthesis of nucleic acid, fatty acids and glutathione (GSH) throughout pentose phosphate pathway. And GSH could protect bacteria from low pH, halide, oxidative stress and osmotic stress by maintaining the viability of cells through intracellular redox equilibrium; (2) Reinforcing deamination of amino acids to increase intracellular ammonia concentration to maintain stability of intracellular pH; (3) Enhancing nucleic acid synthesis and reparation of impaired DNA caused by acid stress damage; (4) Promoting unsaturated fatty acids synthesis and lipid transport, which resulted in the improvement of cytomembrane fluidity, stability and integrity. CONCLUSIONS: The present work is the study to show the effectiveness of Asp and Glu on metabolism and acid stress resistance of A. pasteurianus as well as their working mechanism. The research results will be helpful for development of nutrient salts, the optimization and regulation of high concentration of cider vinegar production process.

In Vitro Antiviral Activity of Germacrone Against Porcine Reproductive and Respiratory Syndrome Virus.

Porcine reproductive and respiratory syndrome (PRRS) is one of the most serious diseases affecting the swine industry worldwide; however, there is no efficient control strategies against PRRSV at present. Therefore, development of new antiviral treatment strategies is urgently needed. As reported, germacrone can efficiently impair influenza virus replication. In this study, we exploited whether germacrone has the potential to inhibit PRRSV infection. Our results showed that the germacrone significantly inhibited replication of PRRSV in vitro and repressed the synthesis of viral RNA and protein. However, it did not block PRRSV binding and entry. Further studies confirmed that germacrone impaired PRRSV replication at an early stage, and inhibited infection of both classic and highly pathogenic type II PRRSV strains. Collectively, our findings imply that the germacrone has the potential to be used as an anti-PRRSV drug.

Inhibitory effects of lithium chloride on replication of type II porcine reproductive and respiratory syndrome virus in vitro.

BACKGROUND: Porcine reproductive and respiratory syndrome (PRRS) is one of the most serious diseases affecting the swine industry worldwide; however, there are no efficient control strategies against PRRS virus (PRRSV) at present. Therefore, development of new antiviral treatment strategies is urgently needed. As reported, lithium chloride (LiCl) can efficiently impair the replication of a variety of viruses, including infectious bronchitis coronavirus (IBV) and transmissible gastroenteritis coronavirus (TGEV). In this report, we explored whether LiCl had the potential to inhibit PRRSV infection. METHODS: MARC-145 cells were treated with LiCl at various stages of PRRSV life cycle. Virus titration assay was performed to determine the virus infectivity. The expression of viral mRNA and protein was measured by real-time PCR and indirect immunofluorescence assay, respectively. The transcript levels of cytokines were evaluated by real-time PCR. RESULTS: LiCl significantly suppressed the synthesis of viral RNA and protein; however, it did not block PRRSV binding and entry. Further studies confirmed that LiCl inhibited PRRSV replication at an early stage and TNF-α, an antiviral cytokine, was significantly increased after LiCl treatment. Thus, we suggested that LiCl inhibited PRRSV infection by up-regulating the level of antiviral cytokine TNF-α at an early infection stage. CONCLUSIONS: Our findings imply that the LiCl has the potential to be used as anti-PRRSV therapy.