Low-cost scanning LIDAR architecture with a scalable frame rate for autonomous vehicles.

Autonomous vehicles need accurate 3D perception with a decent frame rate and high angular resolution to detect obstacles reliably and avoid collisions. We developed a low-cost scanning multichannel light detection and ranging sensor architecture allowing scalable frame rates by adjusting the number of laser and detector pairs. Scanning is achieved by a pair of micro-electro-mechanical system (MEMS) mirrors. A control pattern for the MEMS mirrors to maximize the frame rate is presented. A built prototype based on the proposed architecture achieves a frame rate of 11.5 Hz, a field of view of 70∘×30∘, and an angular resolution of 0.4°. The distance resolution is 6 cm. Reliable single-shot detection for low-reflective objects up to 19 m indoors and 11 m under direct sunlight exposure is achieved. A performance assessment based on the presented measurement system for recently available vertical-cavity surface-emitting laser arrays with power densities up to 1k W/m m 2 shows promising improvement potential.

MEMS-Scanner Testbench for High Field of View LiDAR Applications.

LiDAR sensors are a key technology for enabling safe autonomous cars. For highway applications, such systems must have a long range, and the covered field of view (FoV) of >45° must be scanned with resolutions higher than 0.1°. These specifications can be met by modern MEMS scanners, which are chosen for their robustness and scalability. For the automotive market, these sensors, and especially the scanners within, must be tested to the highest standards. We propose a novel measurement setup for characterizing and validating these kinds of scanners based on a position-sensitive detector (PSD) by imaging a deflected laser beam from a diffuser screen onto the PSD. A so-called ray trace shifting technique (RTST) was used to minimize manual calibration effort, to reduce external mounting errors, and to enable dynamical one-shot measurements of the scanner's steering angle over large FoVs. This paper describes the overall setup and the calibration method according to a standard camera calibration. We further show the setup's capabilities by validating it with a statically set rotating stage and a dynamically oscillating MEMS scanner. The setup was found to be capable of measuring LiDAR MEMS scanners with a maximum FoV of 47° dynamically, with an uncertainty of less than 1%.