Effect of connector height and retainer occlusal thickness on the fracture resistance of posterior 4-unit monolithic 5Y-TZP fixed partial dentures after thermomechanical aging.

STATEMENT OF PROBLEM: The connector height and retainer occlusal thickness of fixed partial dentures (FPDs) may affect restoration longevity. PURPOSE: The purpose of this in vitro study was to determine and compare the fracture resistance of 4-unit monolithic 5% yttria tetragonal zirconia polycrystal (5Y-TZP) FPDs made with different connector heights and retainer occlusal thicknesses after thermomechanical aging. MATERIAL AND METHODS: Forty test metal dies were duplicated from a master metal die containing 2 anatomic abutment preparations of the mandibular right first premolar and second molar for a 4-unit FPD. The dies were divided into 2 groups of 20 each for the fabrication of 4-unit FPDs, with 2-mm and 4-mm uniform connector heights at all 3 connectors, resulting in 6.3-mm2 and 12.6-mm2 connector areas. Each of these groups was further divided into 2 subgroups based on the occlusal thickness of the 2 retainers of 1 mm and 2 mm (n=10). Polyvinyl siloxane impressions of the test metal dies were made and poured in Type V dental stone. Laboratory scans were performed on all the stone dies, and 40 5Y-TZP FPDs (Ceramill Zolid FX) were designed and fabricated. Subsequently, all the FPDs were luted on to the metal dies with a self-adhesive resin cement. The FPDs were preloaded (400 000 mechanical cycles; 4000 thermocycles) using a mastication simulator and tested for axial compressive strength. Two-way analysis of variance (ANOVA) was used to examine the effect of connector and occlusal thicknesses on the fracture load (α=.05). The data were further assessed using the post hoc Tukey HSD multiple comparison test (α=.05). RESULTS: The mean fracture load values were between 737 N and 1563 N. Significant differences in the mean fracture load were found between the connector heights (601 N; P<.001) and occlusal thicknesses (225 N; P=.002), but the interaction of the 2 factors was not significant (P=.132) The Tukey post hoc analysis showed significant differences between the connector thicknesses groups (P<.01), but the occlusal thicknesses were found to be similar for the same connector height (P=.609) CONCLUSIONS: Connector height and occlusal retainer thickness influenced the fracture load of 4-unit monolithic 5Y-TZP FPDs after thermomechanical aging.

Graftless Immediate Dual Implant Anatomic Placement With Immediate Provisional Passive Loading and Definitive Hybrid Crown for the Restoration of Mandibular Molar: A Clinical Report.

Immediate implant placement is well-known science and treatment in implant dentistry. It is a multitasking treatment consisting of surgical, prosthodontic, and periodontal aspects, implemented to obtain long-term clinically esthetic and functioning prosthesis. Immediate placement enables clinicians to reduce the number of surgical steps and shorter treatment duration. It has become a standard surgical protocol in modern implant practice. According to existing literature, dual implant placement can be done to avoid any cantilever effect in a single implant and to distribute masticatory forces. This clinical report describes the extraction of an infected mandibular right first molar, (46, Federation Dentaire Internationale) followed by immediate dual placement of dental implants in the rinsed and cleansed sockets. The tooth was atraumatically extracted from the socket, and the latter was prepared to the required depth, and endosseous implants were placed in both the mesial and distal sockets. This atraumatic graft-free operating technique and immediate placement resulted in the preservation of hard and soft tissues. It also increased the patient's comfort, acceptance, and satisfaction due to immediate loading with a provisional removable prosthesis. This was later replaced with a dual screw-retained hybrid implant crown.

The Effect of Nanosilver Sodium Fluoride on the Mechanical and Physiochemical Properties of Artificially Demineralised Dentin.

PURPOSE: To synthesise and characterise nanosilver sodium fluoride (NSSF) and assess the effect of applying this formulation in vitro on artificially demineralised root dentin lesions, compared with the application of silver diamine fluoride (SDF), sodium fluoride (NAF) or no treatment, in terms of mechanical, chemical and ultrastructural properties. MATERIALS AND METHODS: NSSF was prepared using 0.5 wt% chitosan solution. On 40 extracted human molars, the buccal aspect of the cervical thirds of roots were prepared and divided into 4 groups of 10 each: control (no treatment), NSSF, SDF and NaF (n = 10). The specimens were examined using scanning electron microscopy (SEM), atomic force microscopy (AFM), and x-ray photoelectron spectroscopy (XPS). Fourier transform infrared spectroscopy (FTIR), surface and cross-sectional microhardness and nano-indentation tests were performed to determine the mineral and carbonate content, microhardness, and nanohardness, respectively. Statistical analysis was performed to determine the differences between the different treatment groups for the set parameters using parametric and non-parametric tests. Tukey's and Dunnet's T3 post-hoc tests were further used for multiple comparisons between groups (α = 0.05). RESULTS: The control group (no treatment) was found to have statistically significantly lower mean scores for surface and cross-sectional microhardness compared with all other test groups (NaF, NSSF and SDF) (p < 0.05). Spearman's rank correlation test showed statistically insignificant differences between the mineral-to-matrix ratio (M:M) and carbonate content of all groups (p < 0.05). CONCLUSIONS: Treatment of root lesions with NSSF yielded comparable results to SDF and NaF under in-vitro conditions.

Double Crown-Retained Removable Prostheses Supported by Implants or Teeth and Implants: A Long-Term Clinical Retrospective Evaluation.

OBJECTIVES: The objective of this retrospective clinical study was to investigate the survival rates and complications of implant (I)-retained or tooth-implant (TI)-retained prostheses and abutments (teeth, implants) over a mean observation period of 11.26 years. The study also aimed to analyze the differences and complication rates between implant-retained double crown removable dental prostheses (I-DC-RDPs) versus tooth-implant-retained double crown removable dental prostheses (TI-DC-RDPs). MATERIAL AND METHODS: We reviewed the clinical data of 110 nonsmokers (mean age = 53.9 years) who received DC-RDPs in maxillary or mandibular arches. 153 teeth and 508 implants were used to restore partially edentulous (PE; TI-DC-RDPs; n = 53) and completely edentulous (CE; TI-DC-RDPs; n = 57) arches. Two designs of the distal extension were used: cantilevers (CANs) and saddles (SADs). Restorations were examined for abutment survival, mechanical, or biological complications. RESULTS: The 10-year survival rates were 99.3% (95% CI: 95.4-99.9%) for teeth and 99.3% (95% CI: 97.5-99.7%) for implants. The cumulative rates of TI- and I-RDPs free of technical complications were 77% and 86%, respectively. The risk of complications was not significantly different between the CAN and SAD subgroups of I-RDPs (p > 0.05). However, for TI-RDPs, technical complication risk was significantly higher in SAD type compared with CAN restorations (p = 0.02). CONCLUSIONS: I- and TI-DC-RDPs seem to be recommendable for restoration of CE or PE arches. The technical and biological complication rates were lower for I-DC-RDPs in the CE arches than for TI-DC-RDPs in the PE arches. Regarding the RDP design, CAN prostheses produced significantly fewer technical complications than did SAD prostheses.

Treatment Intricacies in Mandibular Implant-Supported Rehabilitation of a Patient With Down Syndrome: A Clinical Report.

Edentulism is considered a poor health condition and may compromise the quality of life. Prosthodontic replacement of missing teeth results in significant improvement of oral functions. Treating a patient with Down syndrome can pose clinical challenges in handling the emotional aspect as well as in rendering treatment. Careful oral analysis and diagnosis of the existing conditions in such patients will enable and pave the way for clinically acceptable treatment results. This clinical report describes the challenges encountered in the prosthodontic management of an edentulous young patient with Down syndrome.

Clinical outcomes of single crown and 3-unit bi-layered zirconia-based fixed dental prostheses: An upto 6- year retrospective clinical study: Clinical outcomes of zirconia FDPs.

OBJECTIVES: The aim of this retrospective clinical study was to evaluate the survival and the occurrence of technical and biological complications in bi-layered zirconia-based (Zi) single crown and 3-unit fixed dental prostheses (FDPs). Also, the study aimed to analyze the effects of tooth vitality (vital versus non-vital), abutment location (anterior versus posterior), and luting cement (self-adhesive resin versus resin-reinforced glass ionomer) on clinical outcomes. METHODS: A total of 147 prostheses (in 94 patients) placed by undergraduate dental students in a university dental center during the period 2015-2021 were examined clinically using modified United States Public Health Service (USPHS) and California Dental Association (CDA) criteria. The mean duration of follow-up was 37 months (range, 6 - 63 months) for the single crowns (n = 77) and 25 months (range, 6 - 68 months) for the 3-unit FDPs (n = 70). Data were descriptively analyzed to determine the types and rates of complications based on USPHS and CDA criteria. The Kaplan-Meier survival estimation method was used to determine the cumulative survival and success rates of the prostheses (α=0.05). Differences in clinical outcomes (survival or failure) according to tooth vitality, luting cement, and location were statistically analyzed using cross-tabulations and Ð¥2 test (α=0.05). RESULTS: The Kaplan-Meier cumulative survival rate was estimated as 96% for the Zi 3-unit FDPs after 5.5 years, and 90% for the Zi single crowns after 4.8 years. The 5-year estimated success rate was 68% for both 3-unit FDPs and single crowns. Seven (9.1%) 77Zi single crowns and 70 2 (2.9%) Zi 3-unit FDPs were recorded as failures with occlusal roughness being the most commonly-observed complication (crowns: 4 [5.6%]; 3-unit FDPs: 8 [11.4%]). In terms of clinical outcomes, statistically significant differences were found between all included vital and non-vital teeth (p = .006), and cement types (p = .028). Taking single crowns alone, significant differences in clinical outcomes according to tooth vitality were noted (p = .036), but not for PFDPs. The location of the prostheses did not produce any significant differences in the clinical outcomes, for both prostheses types independently or combined (p > .05). CONCLUSIONS: The estimated cumulative survival rates in this study for single crowns and 3-unit Zi FDPs concurred with the ranges reported in systematic reviews. Zi-based prostheses on vital teeth produced better clinical outcomes than those placed on non-vital teeth, and type of luting cement influenced the final clinical outcome. CLINICAL SIGNIFICANCE: Zi crowns and 3-unit PFDPs fabricated using the specific CAD-CAM system used in the controlled environment of this study showed good clinical performance with minimal veneer porcelain chipping. Root canal treated teeth seem to be at higher risk for failure of Zi prostheses compared with vital teeth.

Marginal and internal fit of porcelain laminate veneers: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Marginal integrity and internal adaptation are key to the long-term success of porcelain laminate veneers. Evidence for their marginal and internal fit is unclear, and the factors affecting such fit have not been identified. PURPOSE: The purpose of this systematic review and meta-analysis was to summarize the scientific literature assessing the effects of various parameters on the marginal and internal fit of porcelain laminate veneers. MATERIAL AND METHODS: An electronic search was conducted to identify all relevant published articles on the fit accuracy of ceramic veneers between January 2000 and June 2021 in the PubMed-MEDLINE, Scopus, Embase, Google Scholar, and Web of Science databases. Information, including the study outcomes, in terms of the mean marginal gap, internal gap, and absolute marginal discrepancies of porcelain laminate veneers, was extracted from the selected studies. The inverse-variance random effects model was used to analyze the pooled results and estimate the overall effect based on the heterogeneity of studies (α=.05). RESULTS: Twenty-one studies were selected for analysis, 2 clinical and 19 in vitro. The risk of bias was "medium" for most studies (19 of 21), and only 2 studies were classified as "high risk." A mean difference of -4.53 µm (95% CI: -21.46 to 12.41) was found, with no statistically significant difference in marginal gap between the pressed and milled fabrication modes (P=.600). As for the internal gap, significant differences were found (mean difference=-40.56 µm; 95% CI: -76.54 to -4.58), with pressed veneers performing better (P=.030). Butt joint preparation design produced significantly (P=.002) lower marginal gaps than the palatal chamfer (mean difference=-14.02 µm; 95% CI: -23.07 to -4.98). CONCLUSIONS: No significant differences were found between the pressed and milled porcelain laminate veneers for marginal gap, but for the internal gap, the differences were significantly in favor of the pressed type. The butt joint veneer preparation design was significantly better than the palatal chamfer design in terms of marginal fit.

Evaluation of the marginal fit of a CAD/CAM zirconia-based ceramic crown system.

PURPOSE: To evaluate the marginal fit of zirconia (Zi) CAD/CAM crowns in terms of gap and overhang compared to lithium disilicate (LDS) computer-aided design crowns, as well as the effect of finish line design on marginal accuracy. MATERIALS AND METHODS: Stone dies were acquired from two master metal dies (n = 20 each) with two different finish lines and were scanned to produce digital models. Ceramic crowns (ZS-Ronde Zi, KaVo and IPS e.max CAD LDS, Ivoclar Vivadent) were designed and milled on the resulting 40 dies: 10 Zi-shoulder, 10 Zi-chamfer, 10 LDSshoulder, and 10 LDS-chamfer. Marginal gap and overhang were evaluated at six designated margin locations. The data were obtained, and the influence of material and finish line on the marginal fit of crowns was assessed using two-way analysis of variance and Bonferroni multiple comparisons test (α = .05). RESULTS: Mean marginal gap and overhang on Zi crowns were 30 ± 14 µm and 79 ± 27 µm for the shoulder, respectively, and were 68 ± 34 µm and 104 ± 34 µm for the chamfer. The corresponding values for LDS crowns were 57 ± 22 µm and 74 ± 29 µm for the shoulder, and 62 ± 12 µm and 59 ± 27 µm for the chamfer. ANOVA revealed that the differences in marginal gap between the two materials were not significant (P > .05), but that the finish line effect and interaction were significant (P < .05). With regard to marginal overhang, significant differences were found between Zi and LDS crowns (P < .05), although the finish line geometries did not show any significant differences (P > .05). LDS crowns showed no differences between shoulder and chamfer margins for gap or overhang (P > .05), whereas significant differences were found in marginal gap between the Zi shoulder and chamfer margins (P lt; .005). CONCLUSION: In terms of marginal accuracy, shoulder margins produced smaller marginal gaps compared to chamfers for Zi CAD/CAM crowns.

Evaluation of Marginal and Internal Fit of a CAD/CAM Monolithic Zirconia-Reinforced Lithium Silicate Porcelain Laminate Veneer System.

PURPOSE: To evaluate the marginal and internal fit of monolithic computer-aided design/computer-aided manufacturing (CAD/CAM) ZLS (Vita Suprinity) glass ceramic porcelain laminate veneers (PLVs), in terms of marginal and internal gap widths, in comparison to monolithic lithium disilicate (LDS) [IPS e.max CAD] CAD/CAM veneers, and, also, to analyze the effect of incisal preparation designs (butt joint and chamfer), on the marginal and internal fit accuracy. MATERIALS AND METHODS: Forty dental stone dies poured from impressions made of two master metal dies with different incisal preparation designs were scanned to produce digital models. Forty ceramic veneers were designed and milled using the virtual models-10 ZLS butt joint, 10 ZLS chamfer, 10 LDS butt joint, and 10 LDS chamfer. The monolithic ceramic veneers produced were then subjected to marginal and internal gap width evaluation using X-ray nano-computed tomography and computerized digital analysis (n = 10). Descriptive analyses of data were performed and the influence of "material" and "preparation design" on the marginal and internal fit of veneers was assessed using 2-way ANOVA (α = 0.05). Bonferroni post-hoc multiple comparison tests were used to further analyze the interactions between the material and preparation design after adjusting the α value by Holm-Bonferroni method (α = 0.01). RESULTS: Mean marginal and internal gaps for ZLS PLVs were 65 ±11 µm and 112 ±14 µm for butt joint, and 100 ±24 µm and 100 ±21 µm for chamfer, respectively. Corresponding values for LDS PLVs were 78 ±25 µm and 114 ±17 µm for butt joint, and 104 ±18 µm and 106 ±7 µm for chamfer. Marginal gap and internal gap differences between ZLS and LDS PLVs were not significant (marginal gap: F = 1.786, p = 0.190; internal gap: F = 0.807, p = 0.375). However, the preparation designs (butt joint and chamfer) differed significantly in terms of marginal gaps (F = 23.797, p = 0.000), but not internal gaps (F = 3.703; p = 0.059). CONCLUSIONS: Butt joint margins produced better marginal accuracy in terms of marginal gap, compared to chamfers, for ZLS CAD/CAM laminate veneers.

Effect of Finish Line Design on the Fit Accuracy of CAD/CAM Monolithic Polymer-Infiltrated Ceramic-Network Fixed Dental Prostheses: An In Vitro Study.

A polymer-infiltrated ceramic network (PICN) material has recently been introduced for dental use and evidence is developing regarding the fit accuracy of such crowns with different preparation designs. The aim of this in vitro study was to evaluate the precision of fit of machined monolithic PICN single crowns in comparison to lithium disilicate crowns in terms of marginal gap, internal gap, and absolute marginal discrepancies. A secondary aim was to assess the effect of finish line configuration on the fit accuracy of crowns made from the two materials. Two master metal dies were used to create forty stone dies, with twenty each for the two finish lines, shoulder and chamfer. The stone dies were scanned to produce virtual models, on which ceramic crowns were designed and milled, with ten each for the four material-finish line combinations (n = 10). Marginal gaps and absolute marginal discrepancies were evaluated at six pre-determined margin locations, and the internal gap was measured at 60 designated points using a stereomicroscope-based digital image analysis system. The influence of the material and finish line on the marginal and internal adaptation of crowns was assessed by analyzing the data using two-way analysis of variance (ANOVA), non-parametric, and Bonferroni multiple comparison post-hoc tests (α = 0.05). ANOVA revealed that the differences in the marginal gaps and the absolute marginal discrepancies between the two materials were significant (p < 0.05), but that those the finish line effect and the interaction were not significant (p > 0.05). Using the Mann-Whitney U test, the differences in IG for 'material' and 'finish line' were not found to be significant (p > 0.05). In conclusion, the finish line configuration did not seem to affect the marginal and internal adaptation of PICN and lithium disilicate crowns. The marginal gap of PICN crowns was below the clinically acceptable threshold of 120 µm.

Evaluation of Marginal/Internal Fit and Fracture Load of Monolithic Zirconia and Zirconia Lithium Silicate (ZLS) CAD/CAM Crown Systems.

Fit accuracy and fracture strength of milled monolithic zirconia (Zi) and zirconia-reinforced lithium silicate (ZLS) crowns are important parameters determining the success of these restorations. This study aimed to evaluate and compare the marginal and internal fit of monolithic Zi and ZLS crowns, along with the fracture load, with and without mechanical aging. Thirty-two stone dies acquired from a customized master metal molar die were scanned, and ceramic crowns (16 Zi Ceramill Zolid HT+ and 16 ZLS Vita Suprinity) were designed and milled. Absolute marginal discrepancies (AMD), marginal gaps (MG), and internal gaps (IG) of the crowns, in relation to the master metal die, were evaluated using x-ray nanotomography (n = 16). Next, thirty-two metal dies were fabricated based on the master metal die, and crowns (16 Zi; 16 ZLS) cemented and divided into four groups of eight each; eight Zi with mechanical aging (MA), eight Zi without mechanical aging (WMA), eight ZLS (MA), and eight ZLS (WMA). Two groups of crowns (Zi-MA; ZLS-MA) were subjected to 500,000 mechanical cycles (200 ± 50 N, 10 Hz) followed by axial compressive strength testing of all crowns, until failure, and the values were recorded. Independent sample t tests (α = 0.05) revealed no significant differences between Zi and ZLS crowns (p > 0.05); for both internal and marginal gaps, however, there were significant differences in AMD (p < 0.005). Independent samples Mann-Whitney U and Kruskal-Wallis tests revealed significant differences between the two materials, Zi and ZLS, regardless of fatigue loading, and for the individual material groups based on aging (α = 0.05). Multiple comparisons using Bonferroni post-hoc analysis showed significant differences between Zi and ZLS material groups, with or without aging. Within the limitations of this study, the ZLS crown fit was found to be on par with Zi, except for the AMD parameter. As regards fracture resistance, both materials survived the normal range of masticatory forces, but the Zi crowns demonstrated greater resistance to fracture. The monolithic Zi and ZLS crowns seem suitable for clinical application, based on the fit and fracture strength values obtained.

Highly Segregated Biocomposite Membrane as a Functionally Graded Template for Periodontal Tissue Regeneration.

Guided tissue regeneration (GTR) membranes are used for treating chronic periodontal lesions with the aim of regenerating lost periodontal attachment. Spatially designed functionally graded bioactive membranes with surface core layers have been proposed as the next generation of GTR membranes. Composite formulations of biopolymer and bioceramic have the potential to meet these criteria. Chitosan has emerged as a well-known biopolymer for use in tissue engineering applications due to its properties of degradation, cytotoxicity and antimicrobial nature. Hydroxyapatite is an essential component of the mineral phase of bone. This study developed a GTR membrane with an ideal chitosan to hydroxyapatite ratio with adequate molecular weight. Membranes were fabricated using solvent casting with low and medium molecular weights of chitosan. They were rigorously characterised with scanning electron microscopy, Fourier transform infrared spectroscopy in conjunction with photoacoustic sampling accessory (FTIR-PAS), swelling ratio, degradation profile, mechanical tensile testing and cytotoxicity using human osteosarcoma and mesenchymal progenitor cells. Scanning electron microscopy showed two different features with 70% HA at the bottom surface packed tightly together, with high distinction of CH from HA. FTIR showed distinct chitosan dominance on top and hydroxyapatite on the bottom surface. Membranes with medium molecular weight showed higher swelling and longer degradation profile as compared to low molecular weight. Cytotoxicity results indicated that the low molecular weight membrane with 30% chitosan and 70% hydroxyapatite showed higher viability with time. Results suggest that this highly segregated bilayer membrane shows promising potential to be adapted as a surface layer whilst constructing a functionally graded GTR membrane on its own and for other biomedical applications.

Association of fit of partial denture metal framework with various framework design features using alginate as a final impression material: A prospective clinical study.

OBJECTIVES: To assess the fit of PRDP frameworks fabricated using alginate as a final impression material in metal stock trays, in terms of number of fabricated frameworks needed until realization of clinically adequate fit. Also, any association of framework fit achieved with its design features, namely major connector design, and numbers of guide plates and occlusal/incisal rests was investigated. METHODS: 147 partially dentate patients were provided with Co-Cr PRDPs, in single or both arches, by undergraduate dental students. Final impressions were made with alginate in metal stock trays. At metal framework try-in, clinical examinations were carried out by two prosthodontists and relevant information noted with regard to proper fit. The relationship between three PRDP design features and number of frameworks that needed to be made in each case to achieve satisfactory fit was determined using factorial analysis of variance (ANOVA) (α = 0.05). RESULTS: 86% (148) of the 173 frameworks fabricated were found to be clinically satisfactory at the first try-in visit (with or without any chairside adjustment). The remaining 14% (25) required new impressions for re-fabrication and passed at the second attempt. None of the examined design features were significantly associated with the number of construction attempts needed, for all 173 arches, or when maxillary and mandibular arches were considered independently (p > 0.05). CONCLUSIONS: PRDP design features were not associated with the level of accuracy of fit achieved. CLINICAL SIGNIFICANCE: Alginate in metal stock trays seems to be acceptable for final impressions of all types of Co-Cr PRDP designs with just 1 in 7 castings not fitting after chairside adjustment.

Peri-implant mucosal response to implant-supported overdentures: A systematic review and meta-analysis.

OBJECTIVES: To systematically review and evaluate the effects of different types of attachments, implant numbers and loading protocols on the peri-implant mucosa of implant-supported overdentures (ISODs). BACKGROUND: The impact of peri-implant tissue health on the ISOD treatment outcome is unclear, and current evidence is inadequate on this aspect. MATERIALS AND METHODS: A systematic literature search for randomised controlled trials or prospective studies was conducted in indexed databases from 1995 to April 2020. The focused question was as follows: How does the peri-implant mucosa respond to implant-supported or implant-tissue-supported complete overdentures based on different types of attachments, implant numbers, and loading protocols, in terms of clinical outcomes achieved [plaque index (PI), gingival index (GI), probing pocket depth (PD) and bleeding index (BI)]? A random- or fixed-effects model was applied to measure the significance of standardised mean differences (SMD) of PD between the groups. RESULTS: Seventeen studies met the eligibility criteria. The SMD for PD between splinted/bar and unsplinted/stud attachments was 0.10 mm (95% CI: -0.27 to 0.47; P = .60) and between 2- and 4-implant groups was 0.15 mm (95% CI: -0.16 to 0.45; P = .34), which were not statistically significant. Significant difference (P = .003) was observed between immediate/early loading and delayed loading (SMD = 0.46 mm [95% CI: 0.16 to 0.75]). CONCLUSIONS: Probing depth for the immediate loaded implants was significantly higher than for the delayed loading group. No attachment type, implant number or loading protocol seemed to have a clear advantage over the other, in terms of other peri-implant mucosal outcome measures.

Assessment of Factors Affecting Partial Removable Dental Prostheses Framework Fit: A Clinical Prospective Study.

PURPOSE: To prospectively evaluate the effects of impression material, impression tray type, and partially dentate arch classification on the accuracy of fit of partial removable dental prostheses (PRDP) cobalt-chromium (Co-Cr) frameworks, as inferred from the number of fabricated frameworks required for achievement of acceptable fit. MATERIALS AND METHODS: A total of 103 partially dentate patients provided with Co-Cr PRDP treatment for one or both arches (n = 142) by undergraduate dental students were clinically assessed by two examiners at the metal framework try-in stage, and the relevant data were recorded. Statistical analyses of data were performed using factorial analysis of variance (ANOVA) to study the associations of impression material (alginate, polyvinyl siloxane [PVS]), Kennedy class, and impression tray type (stock, custom) with the number of frameworks that needed to be fabricated for each patient (α = .05). RESULTS: Statistical analyses of data derived from 142 (65 maxillary and 77 mandibular) treated partially edentulous arches revealed no significant correlation between the impression material, Kennedy class, or tray type with respect to the number of framework construction attempts needed (P ≥ .05). Post hoc Tukey test also did not demonstrate any significant differences between the different Kennedy classes in relation to the set outcome measure (P ≥ .05). CONCLUSION: Alginate as an alternative option to PVS and modified metal stock trays can be used for making final impressions to produce PRDP Co-Cr frameworks. Framework fit is unaffected by class of partial edentulism (Kennedy class).

Effect of Multiple Use of Impression Copings and Scanbodies on Implant Cast Accuracy.

PURPOSE: There are currently no clear guidelines on the reuse of metal implant impression copings and scanbodies in implant dentistry. Manufacturers generally recommend single use, which has cost and ecological implications. The objectives of this study were to examine the effect of multiple use of implant impression copings and scanbodies on the accuracy of partially dentate implant casts. MATERIALS AND METHODS: Ten direct polyether impressions were made of a partially dentate mandibular acrylic resin master model fitted with two internal connection implants (Straumann RC bone level) in the positions of right first premolar and molar, to produce 10 dental stone casts. A single set of impression copings was utilized for the 10 impressions. The sample casts and the master model were digitized using a laboratory scanner. Ten digital scans were then performed on an implant stone cast with two bone-level internal connection implant analogs using one set of scanbodies to produce scans 1 to 10. Measurements were made on all the digitized casts using computer software and discrepancies calculated in the x-, y-, and z-axes, and in the overall three-dimensional position (R). Data were statistically analyzed using paired t tests (α = .05), and P values were adjusted using Holm-Bonferroni sequential correction. RESULTS: The outcomes were mixed, in that no significant differences were found between the casts or scans produced by reusing impression copings (P > .05) and scanbodies (P > .005), respectively, in all dimensions, for most repetition cycles; however, significant differences were noted in the y-axis for cast 6, and in 2 relation to R, for casts 2, 4 (P < .05), and 8 (P < .005), and the scanbody reuse elicited significant differences in 3D(R) with scan 2 alone (P < .005). CONCLUSION: Reuse of impression copings and scanbodies up to 10 times did not seem to consistently affect the accuracy of partially dentate multi-implant dental casts and digital models.

Multi-Implant Impressions. To Splint or Not to Splint: A Critical Review.

This invited commentary reviews the use of splinting vs nonsplinting in implant impressions.

Effects of Impression Material, Impression Tray Type, and Type of Partial Edentulism on the Fit of Cobalt-Chromium Partial Denture Frameworks on Initial Clinical Insertion: A Retrospective Clinical Evaluation.

PURPOSE: To evaluate the effects of impression material, impression tray type, and type of partial edentulism (ie, Kennedy class) on the accuracy of fit of cobalt-chromium (Co-Cr) partial removable dental prostheses (PRDP) in terms of the number of fabricated frameworks required until the attainment of adequate fit. MATERIALS AND METHODS: Electronic case documentations of 120 partially edentulous patients provided with Co-Cr PRDP treatment for one or both arches were examined. Statistical analyses of data were performed using analysis of variance and Tukey honest significant difference test to compare the relationships between the different factors and the number of frameworks that needed to be fabricated for each patient (α = .05). RESULTS: Statistical analysis of data derived from 143 records (69 maxillary and 74 mandibular) revealed no significant correlation between impression material, tray type, or Kennedy class and the number of construction attempts for the pooled or individual arch data (P ≥ .05). CONCLUSION: In PRDP treatment, alginate can be chosen as a first-choice material, and metal stock trays can be a preferred option for making final impressions to fabricate Co-Cr frameworks.

Effect of operators' experience and cement space on the marginal fit of an in-office digitally produced monolithic ceramic crown system.

OBJECTIVES: To investigate the marginal accuracy of Cerec three-dimensional (3D) all-ceramic crowns, in terms of gap and overhang, and to analyze the "operators' experience" and "cement space" effects on the marginal fit. METHOD AND MATERIALS: Thirty virtual models were obtained from a metal master die by scanning by three different operators: operator 1 (novice), operator 2 (beginner), and operator 3 (expert) (n = 10). These were further divided into two subgroups of five each, based on the cement space settings: 10 µm and 20 µm. Monolithic ceramic crowns (n = 10) were designed and milled for each virtual model and subjected to marginal gap and overhang evaluation at six designated margin locations. The influence of operators' experience and cement space on the marginal fit of the crowns was assessed by performing Box tests and MANOVA (multiple analysis of variance) (α = .05). Kruskal Wallis test was also used to analyze the interactions between the operators' experience and the cement space. RESULTS: The overall mean ± SD marginal gaps and overhangs for the Cerec 3D crowns, were 154 ± 56 µm and 74 ± 74 µm for novice, 158 ± 53 µm and 86 ± 66 µm for beginner, and 155 ± 52 µm and 47 ± 76 µm for expert, respectively. The MANOVA and Kruskal Wallis tests found no significant differences (P > .05) between the operators, in terms of gap and overhang, for all cement settings. CONCLUSION: The operator experience did not seem to influence the marginal accuracy of Cerec 3D fabricated crowns.

Patient-based and clinical outcomes of implant telescopic attachment-retained mandibular overdentures: a 1-year longitudinal prospective study.

PURPOSE: The purpose of this study was to evaluate and compare Oral Health-Related Quality of Life (OHRQoL), denture satisfaction, and masticatory performance in edentulous patients provided with mandibular implant-supported overdentures (ISODs) retained with telescopic attachments and those of conventional complete dentures (CCDs). Peri-implant soft tissue changes were also evaluated at various intervals during a 1-year observation period. MATERIALS AND METHODS: Participating patients received new CCDs and later received two mandibular interforaminal implants and had their mandibular CCDs converted into ISODs with telescopic attachments. Questionnaires were used to assess OHRQoL (Shortened Oral Health Impact Profile-14, Malaysian version) and denture satisfaction at different stages of treatment with CCDs and ISODs. Objective masticatory performance with the CCDs and ISODs was recorded with a mixing ability test. Evaluations were carried out at 3 months with the new CCDs, 3 months after mandibular ISOD provision, and 1 year after receiving the ISOD. Peri-implant parameters were additionally assessed at specific intervals during the treatment period. The data obtained were statistically analyzed and compared. RESULTS: In the 17 patients who completed the protocol, significant improvements were observed in OHRQoL and patient satisfaction when CCDs were modified to ISODs, after 3 months, and at 1 year. Significantly better mixing ability with the ISOD was noted, with the highest values observed at 1 year. Statistically insignificant differences were observed for all the peri-implant parameters, except for gingival recession, for which significant changes were observed 6 months after ISOD delivery (values had stabilized by 1 year). CONCLUSION: Telescopic crown attachment-retained mandibular ISODs improved OHRQoL, dental prosthesis satisfaction, and masticatory performance compared to CCDs. Peri-implant soft tissue response and implant stability were found to be favorable after 1 year.