Pressure-activated microsyringe (PAM) fabrication of bioactive glass-poly(lactic-co-glycolic acid) composite scaffolds for bone tissue regeneration.

The aim of this work was the fabrication and characterization of bioactive glass-poly(lactic-co-glycolic acid) (PLGA) composite scaffolds mimicking the topological features of cancellous bone. Porous multilayer PLGA-CEL2 composite scaffolds were innovatively produced by a pressure-activated microsyringe (PAM) method, a CAD/CAM processing technique originally developed at the University of Pisa. In order to select the optimal formulations to be extruded by PAM, CEL2-PLGA composite films (CEL2 is an experimental bioactive SiO2 -P2 O5 -CaO-MgO-Na2 O-K2 O glass developed at Politecnico di Torino) were produced and mechanically tested. The elastic modulus of the films increased from 30 to > 400 MPa, increasing the CEL2 amount (10-50 wt%) in the composite. The mixture containing 20 wt% CEL2 was used to fabricate 2D and 3D bone-like scaffolds composed by layers with different topologies (square, hexagonal and octagonal pores). It was observed that the increase of complexity of 2D topological structures led to an increment of the elastic modulus from 3 to 9 MPa in the composite porous monolayer. The elastic modulus of 3D multilayer scaffolds was intermediate (about 6.5 MPa) between the values of the monolayers with square and octagonal pores (corresponding to the lowest and highest complexity, respectively). MG63 osteoblast-like cells and periosteal-derived precursor cells (PDPCs) were used to assess the biocompatibility of the 3D bone-like scaffolds. A significant increase in cell proliferation between 48 h and 7 days of culture was observed for both cell phenotypes. Moreover, qRT-PCR analysis evidenced an induction of early genes of osteogenesis in PDPCs. Copyright © 2015 John Wiley & Sons, Ltd.

Urban biowaste-derived sensitizing materials for caffeine photodegradation.

Caffeine-photosensitized degradation has been studied in the presence of bio-based materials derived from urban biowaste after aerobic aging. A peculiar fraction (namely bio-based substances (BBSs)), soluble in all the pH range, has been used as photosensitizing agent. Several caffeine photodegradation tests have been performed, and positive results have been obtained in the presence of BBSs and H2O2, without and with additional Fe(II) (photo-Fenton-like process). Moreover, hybrid magnetite-BBS nanoparticles have been synthesized and characterized, in order to improve the sensitizer recovery and reuse after the caffeine degradation. In the presence of such nanoparticles and H2O2 and Fe(II), the complete caffeine degradation has been attained in very short time. Both homogeneous and heterogeneous processes were run at pH = 5, milder condition compared to the classic photo-Fenton process.

Evaluation of the relationship between the body positioning and the postural comfort of non-professional cyclists: a new approach.

AIM: Most biomechanical studies on bicycle ergonomics focused on racing efficiency and often neglected the investigation of cycling comfort, due to the difficulties related to the people's subjective feelings. This research work aims at analyzing the comfort on bicycle from an objective viewpoint; specifically, an attempt to relate subject's preferences, determined in a dynamic way, with his/her physical features, acquired by means of anthropometric measurements, was carried out. The validity of some existing and commonly used "rules of thumb" for bicycle fitting is discussed and investigated, and new indications are also proposed to achieve an optimal bike configuration. METHODS: A group of 120 volunteers was considered in this study; they were non-professional cyclists. First, the participants' anthropometric features were acquired; afterwards, the volunteers were asked to cycle on a bicycle fitting system (adjustable gym bike) and then to modify the simulator settings till the optimal subjective feelings of comfort are reached. The linear correlation coefficient between the measured anthropometric features and the geometrical preferences adopted on the cycling simulator was calculated. RESULTS: On one hand, the data analysis allows to propose new indications to achieve an optimal postural comfort on the basis of the physical features of the subject, but, on the other hand, the results confirm that the comfort on bicycles is highly related to personal preferences and, therefore, it is strongly subjective. CONCLUSION: The main conclusions and implications of this study can be summarized as follows: 1) the comfort on bicycle is strongly subjective as it is highly related to personal preferences; 2) an optimal bicycle setting can be achieved only by taking in to account the most relevant anthropometric features of every single cyclist; 3) a station for acquiring cyclists' anthropometric measurements and a bicycle simulator (adjustable gym bike) can act as very useful tools for designing optimal and custom-made bicycle configurations.

Response of human bone marrow stromal cells to a resorbable P(2)O(5)-SiO(2)-CaO-MgO-Na(2)O-K(2)O phosphate glass ceramic for tissue engineering applications.

This work focuses on the synthesis and characterization of a novel bioresorbable glass ceramic phosphate-based material (GC-ICEL). More specifically, its solubility in different aqueous media (water, Tris-HCl and acellular simulated body fluid) and the response of human stromal cells cultured on it were investigated. X-ray diffraction analysis showed the presence of two crystalline phases identified as Na(2)Mg(PO(4))(3) and Ca(2)P(2)O(7) and dissolution tests highlighted a preferential dissolution of the Na(2)Mg(PO(4))(3) phase and of the residual amorphous phase in all the chosen media. Soaking tests in simulated body fluid showed precipitation of a hydroxyapatite layer, demonstrating the bioactivity of GC-ICEL, which is partially due to the reported bioactivity of Ca(2)P(2)O(7). The effect of GC-ICEL on adhesion, proliferation and osteoblastic gene expression of human bone marrow-derived stromal cells was also studied. Combining molecular and biochemical analyses, it was found that bone marrow cell differentiation was stimulated over proliferation on GC-ICEL. Moreover, the expression of bone-related genes in cells cultured on GC-ICEL confirmed the bioactivity of this phosphate-based glass ceramic, which might have a stimulatory effect on osteogenesis.