Gemcitabine hydrochloride microspheres used for intravesical treatment of superficial bladder cancer: a comprehensive in vitro/ex vivo/in vivo evaluation.

INTRODUCTION: Bladder cancer is responsible for more than 130,000 deaths annually worldwide. Intravesical delivery of chemotherapeutic agents provides effective drug localization to the target area to reduce toxicity and increase efficacy. This study aimed to develop an intravesical delivery system of gemcitabine HCl (Gem-HCl) to provide a sustained-release profile, to prolong residence time, and to enhance its efficiency in the treatment of bladder cancer. MATERIALS AND METHODS: For this purpose, bioadhesive microspheres were successfully prepared with average particle size, encapsulation efficiency, and loading capacity of 98.4 µm, 82.657%±5.817%, and 12.501±0.881 mg, respectively. For intravesical administration, bioadhesive microspheres were dispersed in mucoadhesive chitosan or in situ poloxamer gels and characterized in terms of gelation temperature, viscosity, mechanical, syringeability, and bioadhesive and rheological properties. The cytotoxic effects of Gem-HCl solution, Gem-HCl microspheres, and Gem-HCl microsphere-loaded gel formulations were evaluated in two different bladder cancer cell lines: T24 (ATCC HTB4TM) and RT4 (ATCC HTB2TM). RESULTS: According to cell-culture studies, Gem-HCl microsphere-loaded poloxamer gel was more cytotoxic than Gem-HCl microsphere-loaded chitosan gel. Antitumor efficacy of newly developed formulations were investigated by in vivo studies using bladder-tumor-induced rats. CONCLUSION: According to in vivo studies, Gem-HCl microsphere-loaded poloxamer gel was found to be an effective and promising alternative for current intravesical delivery-system therapies.

Mucoadhesive in situ gel formulation for vaginal delivery of clotrimazole: formulation, preparation, and in vitro/in vivo evaluation.

The purpose of this study was to develop a suitable mucoadhesive in situ gel formulation of clotrimazole (CLO) for the treatment of vaginal candidiasis. For this aim, the mixture of poloxamer (PLX) 407 and 188 were used to prepare in situ gels. Hydroxypropyl methylcellulose (HPMC) K100M or E50 was added to in situ gels in 0.5% ratio to improve the mucoadhesive and mechanical properties of formulations and to prolong the residence time in vaginal cavity. After the preparation of mucoadhesive in situ gels; gelation temperature/time, viscosity, mechanical, mucoadhesive, syringeability, spreadibility and rheological properties, in vitro release behavior, and anticandidal activities were determined. Moreover vaginal retention of mucoadhesive in situ gels was investigated with in vivo distribution studies in rats. Based on the obtained results, it was found that gels prepared with 20% PLX 407, 10% PLX 188 and 0.5% HPMC K100M/E50 might be suitable for vaginal administration of CLO. In addition, the results of in vivo distribution studies showed that gel formulations remained on the vaginal mucosa even 24 h after application. In conclusion, the mucoadhesive in situ gels of CLO would be alternative candidate for treatment of vaginal candidiasis since it has suitable gel properties with good vaginal retention.

Design and evaluation of an intravesical delivery system for superficial bladder cancer: preparation of gemcitabine HCl-loaded chitosan-thioglycolic acid nanoparticles and comparison of chitosan/poloxamer gels as carriers.

This study aimed to develop an intravesical delivery system of gemcitabine HCl for superficial bladder cancer in order to provide a controlled release profile, to prolong the residence time, and to avoid drug elimination via urination. For this aim, bioadhesive nanoparticles were prepared with thiolated chitosan (chitosan-thioglycolic acid conjugate) and were dispersed in bioadhesive chitosan gel or in an in situ gelling poloxamer formulation in order to improve intravesical residence time. In addition, nanoparticle-loaded gels were diluted with artificial urine to mimic in vivo conditions in the bladder and were characterized regarding changes in gel structure. The obtained results showed that chitosanthioglycolic acid nanoparticles with a mean diameter of 174.5±3.762 nm and zeta potential of 32.100±0.575 mV were successfully developed via ionotropic gelation and that the encapsulation efficiency of gemcitabine HCl was nearly 20%. In vitro/ex vivo characterization studies demonstrated that both nanoparticles and nanoparticle-loaded chitosan and poloxamer gels might be alternative carriers for intravesical administration of gemcitabine HCl, prolonging its residence time in the bladder and hence improving treatment efficacy. However, when the gel formulations were diluted with artificial urine, poloxamer gels lost their in situ gelling properties at body temperature, which is in conflict with the aimed formulation property. Therefore, 2% chitosan gel formulation was found to be a more promising carrier system for intravesical administration of nanoparticles.

Evaluation of chitosan based vaginal bioadhesive gel formulations for antifungal drugs.

The aim of the present study was to evaluate chitosan as a vaginal mucoadhesive gel base for econazole nitrate and miconazole nitrate. To this aim, different types of chitosan with different molecular masses and viscosity properties [low molecular mass chitosan (viscosity: 20,000 mPa s), medium molecular mass chitosan (viscosity: 200,000 mPa s), high molecular mass chitosan (viscosity: 800,000 mPa s)] have been used. First, rheological studies were conducted on chitosan gels. Mechanical, syringeability and mucoadhesive properties of chitosan gels were determined. Release profiles of econazole nitrate and miconazole nitrate from chitosan gels were obtained and evaluated kinetically. In addition, anticandidal activities of formulations were determined. Finally, vaginal retention of chitosan gels in rats was evaluated by in vivo distribution studies. Based on the results, it can be concluded that gels prepared with medium molecular mass chitosan might be effectively used for different antifungal agents in the treatment of vaginal candidiosis, since it has high mucoadhesiveness, suitable mechanical and release properties with good vaginal retention.

In-situ gel formulations of econazole nitrate: preparation and in-vitro and in-vivo evaluation.

OBJECTIVES: This study describes the in-situ gelling of econazole nitrate containing thermosensitive polymers composed of poloxamer 407 and 188 as a novel treatment platform for vaginal candidiasis. METHODS: Aqueous thermosensitive formulations containing 1% of econazole nitrate and poloxamer 407 and/or 188 were prepared and their rheological, mechanical and drug-release properties determined at 20 ± 0.1°C and/or 37 ± 0.1°C. Based on their biologically suitable thermorheological properties, formulations containing the mixtures of poloxamer 407 and 188 in ratios of 15:15 (F1), 15:20 (F2) and 20:10 (F3) were chosen for comprehensive analysis. KEY FINDINGS: Formulations based on F3 exhibited typical gel-type mechanical spectra (G' > G″) at 37°C whereas formulations based on F1 and F2 exhibited properties akin to weakly cross-linked gels. Texture profile analysis demonstrated that F3 showed the highest cohesiveness, adhesiveness, hardness and compressibility. No statistically significant differences (P > 0.5) were observed in the release of econazole nitrate from the formulations at pH 4.5, which in all cases followed anomalous diffusion kinetics. Formulations based on 20% poloxamer 407:10% poloxamer 188 were chosen for in-vivo studies and were shown to be effective for the treatment of the vaginal candidiasis. Histopathologic evaluation also supported the effectiveness of the thermosensitive formulation administered intravaginally. CONCLUSION: By careful engineering of the rheological properties, in-situ thermosensitive gel formulations of econazole nitrate were prepared and were shown to be efficacious in the treatment of vaginal candidiasis.

In vitro evaluation of mucoadhesive vaginal tablets of antifungal drugs prepared with thiolated polymer and development of a new dissolution technique for vaginal formulations.

The main objective of this work was to develop antifungal matrix tablet for vaginal applications using mucoadhesive thiolated polymer. Econazole nitrate (EN) and miconazole nitrate (MN) were used as antifungal drugs to prepare the vaginal tablet formulations. Thiolated poly(acrylic acid)-cysteine (PAA-Cys) conjugate was synthesized by the covalent attachment of L-cysteine to PAA with the formation of amide bonds between the primary amino group of L-cysteine and the carboxylic acid group of the polymer. Vaginal mucoadhesive matrix tablets were prepared by direct compression technique. The investigation focused on the influence of modified polymer on water uptake behavior, mucoadhesive property and release rate of drug. Thiolated polymer increased the water uptake ratio and mucoadhesive property of the formulations. A new simple dissolution technique was developed to simulate the vaginal environment for the evaluation of release behavior of vaginal tablets. In this technique, daily production amount and rate of the vaginal fluid was used without any rotational movement. The drug release was found to be slower from PAA-Cys compared to that from PAA formulations. The similarity study results confirmed that the difference in particle size of EN and MN did not affect their release profile. The release process was described by plotting the fraction released drug versus time and n fitting data to the simple exponential model: M(t)/M(∞)=kt(n). The release kinetics were determined as Super Case II for all the formulations prepared with PAA or PAA-Cys. According to these results the mucoadhesive vaginal tablet formulations prepared with PAA-Cys represent good example for delivery systems which prolong the residence time of drugs at the vaginal mucosal surface.

Rheological and mechanical properties of poloxamer mixtures as a mucoadhesive gel base.

This study described the thermosensitive formulations composed of poloxamer mixtures for use as drug delivery platform via mucosal route. It also characterized the poloxamer mixtures' rheological, mechanical and mucoadhesive properties. Poloxamer (Plx) 407 and Plx 188 were used alone and together for preparing the mucosal drug delivery platform. The mixtures of Plx 407 and Plx 188 in ratio of 15:15 (F5); 15:20 (F6); 20:10 (F7) existed liquid at room temperature, but gelled at physiological temperature. Flow rheometry studies and oscillatory analysis of each formulation were performed at 20 ± 0.1°C and 37 ± 0.1°C. F5 and F7 formulations exhibited typical gel-type mechanical spectra (G' > G″) after the determined frequency value at 37°C whereas F6 behaved as weakly cross-linked gel. Texture profile analysis presented that F5 and F7 showed similar mechanical properties and can be used as base for mucosal dosage form. Mucoadhesion studies indicated the difference among the formulations and the effect of the mucosal surface on mucoadhesive properties. Mucin disc, bovine vaginal and buccal mucosa were used as mucosal platform for mucoadhesion studies. It is suggested that these investigations may be usefully combined to provide a more rational basis for selecting the ratio of Plx to prepare a topical thermosensitive drug delivery system for mucosal administration.

A design and evaluation of layered matrix tablet formulations of metoprolol tartrate.

The aim of this paper was to evaluate the performance of different swellable polymers in the form of layered matrix tablets to provide controlled therapeutic effect of metoprolol tartrate for twice daily administration. Seven different swellable polymers (carrageenan, hydroxypropylmethyl cellulose, pectin, guar gum, xanthan gum, chitosan, and ethyl cellulose) were evaluated alone or in combination as release-retardant layer. Tablets were tested for weight variation, hardness, diameter/thickness ratio, friability, and drug content uniformity and subjected to in vitro drug-release studies. In addition, the target-release profile of metoprolol tartrate was plotted using its clinical pharmacokinetic data, and the release profiles of the tablets were evaluated in relation to the plotted target release profile. Carrageenan was determined as the best polymer in two-layered matrix tablet formulations due to its better accordance to the target release profile and was selected for preparing three-layered matrix tablets. Carrageenan formulations exhibited super case II release mechanism. Accelerated stability testing was performed on two- and three-layered matrix tablet formulations of carrageenan. The tablets were stored at 25 degrees C/60% relative humidity and 40 degrees C/75% relative humidity for 6 months and examined for physical appearance, drug content, and release characteristics. At the end of the storage time, formulations showed no change either in physical appearance, drug content, or drug-release profile. These results demonstrated the suitability of three-layered tablet formulation of carrageenan to provide controlled release and improved linearity for metoprolol tartrate in comparison to two-layered tablet formulation.

Design and formulation of mebeverine HCl semisolid formulations for intraorally administration.

Gel formulations of mebeverine hydrochloride (MbHCl) containing hydroxypropylmethylcellulose (HPMC), metolose (MTL), and poloxamer 407 (PLX) were prepared to be used in the treatment of different oral painful conditions. HPMC was used as a mucoadhesive gel base while MTL and PLX were used to prepare sol-gel thermosensitive gels. MTL and PLX formulations showed proper sol-gel transition temperature for intraoral application. Formulations were evaluated in terms of their viscosity, mechanical properties, mucoadhesivity, stability, and in vitro drug release. The formulation prepared with 2% of HPMC K100M provided the highest viscosity at room temperature. However, the viscosity of HPMC-PLX mixture showed a significant increase at body temperature. The greatest mucoadhesion was also noted in HPMC-PLX combinations. Texture profile analysis exhibited the differences of the adhesion, hardness, elasticity, cohesiveness, and compressibility of the formulations. The release profiles of MbHCl were obtained, and non-Fickian release was observed from all the formulations. The formulations were stored at different temperature and relative humidity. No significant changes were observed at the end of the 3 months. HPMC-PLX formulation of MbHCl was chosen for in vivo studies, and it remained longer than dye solution on the rabbit's intraoral mucosal tissue. It was found worthy of further clinical evaluation.

Strategies to prolong the intravaginal residence time of drug delivery systems.

The vagina has been studied as a favorable site for local and systemic delivery of drugs for female-related conditions. There are a large number of vaginal medications on the market and most of them require frequent application due to their short vaginal residence time. A prolonged vaginal residence time of formulations is therefore a key parameter for improved therapeutic efficacy. Promising approaches to prolong the residence time base on mucoadhesion, in- situ sol-gel transition and mechanical fixation. Mucoadhesive drug delivery systems can be tailored to adhere to the vaginal tissue. In-situ gelling systems offer the advantage of increased viscosity in vaginal cavity and consequently reduce outflow from the vagina. Mechanical fixation needs specially shaped drug delivery systems and reduce the frequency of administration significantly. Within this review an overview on these different strategies and systems is provided. Furthermore, the techniques to evaluate the potential of these systems for prolonged vaginal residence time are described.

Bioadhesive controlled release systems of ornidazole for vaginal delivery.

Our objective was to develop a bioadhesive vaginal tablet formulation of ornidazole by using different polymer mixtures, to evaluate the bioadhesive tablet properties, and to investigate the irritation potential of the formulations to the rat vaginal tissue. Vaginal tablets of ornidazole were directly compressed with bioadhesive and swellable polymer mixtures as release-controlled agents. Carbopol 934 (Cp), pectin (Pc), hydroxypropylmethylcellulose (HPMC), sodium carboxymethylcellulose (Na CMC), and guar gum (GG) were used in different ratios. Bioadhesive properties, swelling capacity, release studies, and histological studies of the formulations were carried out. The bioadhesive strength between bovine vagina and surface of the tablets was determined by tensile experiments, and it was found to be dependent on Cp content. The release mechanism was described and found to be non-Fickian for all formulations. Dissolution data were evaluated statistically. No histological damage was found except one formulation containing high amount of guar gum.