Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Language
Publication year range
1.
Environ Technol ; 44(16): 2441-2450, 2023 Jun.
Article in English | MEDLINE | ID: mdl-35044281

ABSTRACT

The increasing interest of all stakeholders to achieve environmental protection with socioeconomic development puts pressure on industrial processes for less negative impact on the environment. The use of biomass for wastewater treatment has increased due to its low costs and technical feasibility. The present study aimed the use of biomass from a waste of known polluted area for the adsorption of Zn and Cu in a fixed-bed reactor. Samples were collected in Cubatão (Brazil) and cultivated in LB medium. Resulting cultivable bacterial communities were identified as Enterococcus faecalis and Pseudomonas aeruginosa. Adsorption experiments were performed varying the metallic ion concentration and the amount of biomass. Adsorption experiments showed efficiency rates up to 90%. As the concentration of metallic ions increased, the adsorption efficiency decreased, indicating that the active sites were saturated. Activated charcoal demonstrated lower adsorption rates than biomass. Elution process showed that HNO3 had better efficiency than HCl. Zn adsorption fitted better for Lineweaver-Burk model (Qmax = 200 mg/g of biomass), while Cu adsorption fitted better for Langmuir model (Qmax = 164 mg/g of biomass). Results here demonstrated that the adsorption of Zn and Cu simulating an industrial wastewater by the biomass from a contaminated area is technically feasible.


Subject(s)
Water Pollutants, Chemical , Water Purification , Copper/chemistry , Zinc/chemistry , Wastewater , Adsorption , Biomass , Hydrogen-Ion Concentration , Organic Chemicals , Water Purification/methods , Kinetics , Water Pollutants, Chemical/chemistry
2.
Environ Monit Assess ; v. 191: 247, 2019.
Article in English | Sec. Est. Saúde SP, SESSP-IBPROD, Sec. Est. Saúde SP | ID: but-ib15905

ABSTRACT

The present study investigated the effect of contact time, the initial concentration of metal ions, and the biomass dose on the Cu(II) biosorption from an aqueous solution using dead biomass of filamentous fungus Penicillium ochrochloron, which was isolated at the Sossego mine, a copper-contaminated site located in Canaã dos Carajás city, Brazil. The Cu(II) biosorption started rapidly and increased gradually until the equilibrium was reached at 20 min. The Cu(II) uptake decreased as the initial Cu(II) concentration increased, reaching the saturation at 200 mg/L. The Cu(II) biosorption was considerably higher using 0.2 g than 0.5 g of the biomass in 50 mL of solution. The average biosorption capacity of Cu(II) was 7.53 mg/g and the maximum Cu(II) removal 75.0%. The Freundlich and Langmuir isotherm models adequately described the adsorption data. Our results evidenced that the dead biomass of P. ochrochloron has a great potential as a biosorbent to remove copper from an aqueous solution. Therefore, it could be explored for the development of the environmental recovery process.

3.
Environ Sci Pollut Res Int ; 24(4): 3717-3726, 2017 Feb.
Article in English | MEDLINE | ID: mdl-27888481

ABSTRACT

Copper mining has polluted soils and water, causing a reduction of the microbial diversity and a change in the structure of the resident bacterial communities. In this work, selective isolation combined with MALDI-TOF MS and the 16S rDNA method were used for characterizing cultivable bacterial communities from copper mining samples. The results revealed that MALDI-TOF MS analysis can be considered a reliable and fast tool for identifying copper-resistant bacteria from environmental samples at the genera level. Even though some results were ambiguous, accuracy can be improved by enhancing reference databases. Therefore, mass spectra analysis provides a reliable method to facilitate monitoring of the microbiota from copper-polluted sites. The understanding of the microbial community diversity in copper-contaminated sites can be helpful to understand the impact of the metal on the microbiome and to design bioremediation processes.


Subject(s)
Bacteria/isolation & purification , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization , Bacteria/genetics , Copper/isolation & purification , Mining , RNA, Ribosomal, 16S/genetics , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization/methods , Time Factors
SELECTION OF CITATIONS
SEARCH DETAIL
...