Shear Bond Strength of Zirconia to Titanium Implant Using Glass Bonding.

This study evaluated the shear bond strength of zirconia to titanium implant components using silica-based glasses and compared the strength with that of implant components bonded using a commercial resin cement. Forty cylindrical zirconia specimens and forty titanium disks (Grade IV) were divided equally into four groups, depending on the adhesive used: three different types of glasses (group G, group GI, group GIB) and a self-adhesive resin cement (group U200), which was used as a control. The shear bond strength was evaluated using a universal testing machine and failure mode was examined by optical microscope. Data was analyzed using One-way ANOVA with p-value <0.05, which was considered statistically significant. The shear bond strength of the three glass groups was significantly higher than that of group U200 (p<0.05). Failure mode in all groups was a combination of adhesive and cohesive modes. Shear bond strength of zirconia to titanium bonded using glasses was higher than that using self-adhesive resin cement.

Antibacterial Activity and Fibroblast Cell Viability of Zirconia Coated with Glass Ceramic Containing Ag and NaF Nanoparticles.

The aim of this study was to evaluate the antibacterial activity against Streptococcus mutans and fibroblast viability of zirconia coated with glass ceramic powder containing Ag and F nanoparticles. Specimens were divided into eight groups depending on the glass ceramic powders: 5, 10, 15, 20 wt% of NaF and Ag, respectively. Adhesion of Streptococcus mutans on glass-coated zirconia surface was evaluated by antimicrobial test. Fibroblast viability was examined by WST-8 assay. In result, the bacterial activity was reduced by 11.8%, 15.4% in Ag 10 wt% and 20 wt% groups. When 5~15 wt% of NaF was added, bacterial counts decreased to 4.2~65.4%, and when 20 wt% of NaF was added, the number of bacteria increased by 29.4%. Regardless of Ag and NaF content, all zirconia specimens showed cell viability above 70%. Within the limitations of this study, zirconia coated with glass ceramics powder containing Ag and NaF was found to reduce the adhesion of Streptococcus mutans but had no influence on osteoblast activation.

Evaluation of the Fitness of Glass-Infiltrated Zirconia Core in Maxillary Central Incisor.

The purpose of this study was to evaluate the fitness of zirconia cores according to the amount and treated surface of glass infiltration. A maxillary right central incisor customized abutment was milled to have a 6° slope and a 1 mm deep chamfer margin and was manufactured in an intaglio mold using silicone impression material. Fifty-six stone dies were produced by injecting high strength dental stone into a mold and then zirconia cores were milled with CAD/CAM systems. The control group (Control) used non glass-infiltrated zirconia, and the experiment group was divided by one with the glass and distilled water ratio of 1:300 and the other with the ratio of 1:100. Each group was divided into subgroups by glasstreated surface: external surface infiltration, internal surface infiltration, and both surface infiltration. The zirconia cores sintered after glass infiltration were attached to the stone dies and then cut. Afterwards, the absolute marginal discrepancies and internal gaps of the buccal and lingual sides were measured. The buccal absolute marginal discrepancies and lingual internal gaps were influenced by the glass infiltration amount (p < 0.05); while fitness of zirconia core were not affected by the glasstreated surface (p > 0.05). As a result of the above experiments, the glass-infiltrated zirconia cores showed a clinically acceptable fitness, which is within 120 µm. This means that glass infiltration can be clinically used.

The Effect of Glass Layer Thickness on the Shear Bond Strength Between Glass Infiltrated Zirconia and Veneering Porcelain.

This study was to investigate the various glass thicknesses on the shear bond strength between zirconia and veneering porcelain. The zirconia specimens were classified into 5 groups (n = 12). For the control group, the Y-TZP disk was sintered (G0). For the test group, the presintered zirconia disks were spin coated with different W/P ratio glass compositions. The glass thickness on the zirconia was 1 µm (G1), 4 µm (G4), 10 µm (G10), and 40 µm (G40), respectively. All specimens were build-up veneering porcelain and fired. The shear bond strength (SBS) was tested in a universal testing machine (crosshead speed = 0.5 mm/min). As the thickness of the glass decreased, the shear bond strength increased. The G1 group showed significantly higher than the control group (G0) (P < 0.05). The results suggest that the thickness of glass coating on the zirconia structure needs to be made thin for better bonding strength with veneering porcelain.

Design, synthesis of methotrexate-diosgenin conjugates and biological evaluation of their effect on methotrexate transport-resistant cells.

A series of methotrexate-diosgenin conjugates was designed and synthesized to enhance the passive internalization of methotrexate (MTX) into transport-resistant cells. The inhibitory effects of these conjugates on dihydrofolate reductase (DHFR), and their anti-proliferation behaviors against a transport-resistant breast cancer cell line, MDA-MB-231, were investigated. All of the synthesized conjugates retained an ability to inhibit DHFR after the diosgenin substitution. The MTX conjugates were much more potent against methotrexate-resistant MDA-MB-231 cells than MTX. Conjugate 18, containing a disulfide bond, exhibited the most potent anti-proliferative and DHFR inhibitory effects (IC50=4.1µM and 17.21nM, respectively). Anti-proliferative activity was higher in the conjugate with a longer space linker (conjugate 21) than those with shorter linkers (conjugates 19 and 20). These results suggest that diosgenin conjugation of MTX may be an effective way to overcome its transport resistance in cancer cells.

MicroCT Analysis of Micro-Nano Titanium Implant Surface on the Osseointegration.

This study was to investigate the effects of micro-nano titanium implant surface on the osseointegration. A total of 36 screw-shaped implants were used. The implant surfaces were classified into 3 groups (n = 12): machined surface (M group), nanosurface which is nanotube formation on the machined surface (MA group) and nano-micro surface which is nanotube formation on the RBM surface (RA group). Anodic oxidation was performed at a 20 V for 10 min with 1 M H3PO4 and 1.5 wt% HF solutions. The implants were installed on the humerus on 6 beagles. After 4 and 12 weeks, the morphometric analysis with micro CT (skyscan 1172, SKYSCAN, Antwerpen, Belgium) was done. The data were statistically analyzed with two-way ANOVA. Bone mineral density and bone volume were significantly increased depending on time. RA group showed the highest bone mineral density and bone volume at 4 weeks and 12 weeks significantly. It indicated that nano-micro titanium implant surface showed faster and more mature osseointegration.

Analysis of Removal Torque of Injection Molded Zirconia Implants; An Experimental Study on Beagles.

This study compared the removal torque between injection molded zirconia implants and titanium implants with resorbable blast media (RBM) surfaces in beagle humeri. Fifteen screw-shaped implants were classified into 3 groups; titanium implant with RBM surface (Group RT), injection molded zirconia implant (Group Zr) and injection molded zirconia implant with sand-blasted surface (Group ZrS). Implants were inserted into beagle humeri. After 12 weeks, removal torque values were measured. The Zr group has a slightly higher removal torque value than the RT and ZrS groups but there were no significant differences among groups. Zirconia implants shows a similar removal torque to RBM titanium implants. This in vivo study showed injection molded zirconia implants could be an alternative to RBM titanium implants in terms of removal torque.

Evaluation of sustained drug delivery for bone morphogenetic protein on the functionalized nanotubular surface.

An effective loading method of the recombinant human Bone Morphogenetic Protein-2 (rhBMP-2) on the implant surface is essential for promoting bone formation. However, the studies comparing the effectiveness of loading methods for rhBMP-2 are insufficient. The objective of this study was to investigate the sustained rhBMP-2 delivery on the functionalized nanotubular surface. rhBMP-2 loading method on functionalized nanotubular surface was divided into 3 groups; coating and dry method, vacuum method, lyophilization method. A total of 10 ug rhBMP-2 was loaded into functionalized nanotubular titanium implant surfaces (3.75 mm in diameter and 7 mm in length). The releasing time of rhBMP-2 was evaluated at 1, 5, 7 days. The data were statistically analyzed with one-way ANOVA and a Post Hoc Bonferroni test. A sustained release pattern was observed in each groups and the amount of rhBMP-2 loaded was the highest in the lyophilization group. The results suggest that lyophilization method is effective method to load rhBMP-2 on the functionalized nanotubular surface and the functionalized nanotubular surface could be a sustainable useful carrier of rhBMP-2.

Photocatalytic degradation of methylene blue over nanosized TiO2 particles prepared using the self-propagating high-temperature synthesis method.

In order to reutilize the spent metallic titanium chips, TiO2 photocatalysts were prepared using the self-propagating high-temperature synthesis (SHS) method, and were characterized by N2 gas adsorption, X-ray diffraction, and scanning electron microscope, particle size distribution. Also, their photocatalytic activities were evaluated using methylene blue as a model organic compound. It was confirmed that the crystal structure of TiO2 prepared by SHS method was relatively homogeneous powder of rutile type. Optimum conditions for photocatalytic degradation of methylene blue under UV-C irradiation were methylene blue 9.5 ppm in solution and at amount of TiO2 added of 0.02 g/L. In addition, it was found that the photocatalytic activity for methylene blue degradation over the prepared TiO2 particles was positively related with BET specific surface area.

Surface observation of nanotube/micropit formed Ti-Nb-xZr alloy for biocompatibility.

To improve bone tissue integration on implant surfaces, nanotube formation and laser texturing techniques have been used to increase the roughness of the implant surfaces. In this study, surface film of nanotube/micropit formed Ti-3ONb-xZr and Ti-30Ta-xZr alloy with low elastic modulus have been investigated using field emission scanning electron microscope (FE-SEM) and energy dispersive X-ray spectroscope (EDS). The alloying elements can play role in controlling the nanotube shape and micropit shape, the highly ordered nanostructure, and contact angle for biocompatibility.