Galectin-3 Plays a Role in Neuroinflammation in the Visual Pathway in Experimental Optic Neuritis.

Multiple sclerosis (MS) is an inflammatory demyelinating disease of the central nervous system (CNS) featuring numerous neuropathologies, including optic neuritis (ON) in some patients. However, the molecular mechanisms of ON remain unknown. Galectins, ß-galactoside-binding lectins, are involved in various pathophysiological processes. We previously showed that galectin-3 (gal-3) is associated with the pathogenesis of experimental autoimmune encephalomyelitis (EAE), an animal model of MS. In the current study, we investigated the expression of gal-3 in the visual pathway in EAE mice to clarify its role in the pathogenesis of ON. Immunohistochemical analysis revealed upregulation of gal-3 in the visual pathway of the EAE mice during the peak stage of the disease, compared with naïve and EAE mice during the chronic stage. Gal-3 was detected mainly in microglia/macrophages and astrocytes in the visual pathway in EAE mice. In addition, gal-3+/Iba-1+ cells, identified as phagocytic by immunostaining for cathepsin D, accumulated in demyelinating lesions in the visual pathway during the peak disease stage of EAE. Moreover, NLRP3 expression was detected in most gal-3+/Iba-1+ cells. These results strongly suggest that gal-3 regulates NLRP3 signaling in microglia/macrophages and neuroinflammatory demyelination in ON. In astrocytes, gal-3 was expressed from the peak to the chronic disease stages. Taken together, our findings suggest a critical role of gal-3 in the pathogenesis of ON. Thus, gal-3 in glial cells may serve as a potential therapeutic target for ON.

14-Electron Redox Chemistry Enabled by Salen-Based π-Conjugated Framework Polymer Boosting High-Performance Lithium-Ion Storage.

A paucity of redox centers, poor charge transport properties, and low structural stability of organic materials obstruct their use in practical applications. Herein, these issues have been addressed through the use of a redox-active salen-based framework polymer (RSFP) containing multiple redox-active centers in π-conjugated configuration for applications in lithium-ion batteries (LIBs). Based on its unique architecture, RSFP exhibits a superior reversible capacity of 671.8 mAh g-1 at 0.05 A g-1 after 168 charge-discharge cycles. Importantly, the lithiation/de-lithiation performance is enhanced during operation, leading to an unprecedented reversible capacity of 946.2 mAh g-1 after 3500 cycles at 2 A g-1. The structural evolution of RSFP is studied ex situ using X-ray photoelectron spectroscopy, revealing multiple active C═N, C─O, and C═O sites and aromatic sites such as benzene rings. Remarkably, the emergence of C═O originated from C─O is triggered by an electrochemical process, which is beneficial for improving reversible lithiation/delithiation behavior. Furthermore, the respective strong and weak binding interactions between redox centers and lithium ions, corresponding to theoretical capacities of 670.1 and 938.2 mAh g-1, have been identified by density functional theory calculations manifesting 14-electron redox reactions. This work sheds new light on routes for the development of redox-active organic materials for energy storage applications.

Thermal Conductivity Enhancement of Polymeric Composites Using Hexagonal Boron Nitride: Design Strategies and Challenges.

With the integration and miniaturization of chips, there is an increasing demand for improved heat dissipation. However, the low thermal conductivity (TC) of polymers, which are commonly used in chip packaging, has seriously limited the development of chips. To address this limitation, researchers have recently shown considerable interest in incorporating high-TC fillers into polymers to fabricate thermally conductive composites. Hexagonal boron nitride (h-BN) has emerged as a promising filler candidate due to its high-TC and excellent electrical insulation. This review comprehensively outlines the design strategies for using h-BN as a high-TC filler and covers intrinsic TC and morphology effects, functionalization methods, and the construction of three-dimensional (3D) thermal conduction networks. Additionally, it introduces some experimental TC measurement techniques of composites and theoretical computational simulations for composite design. Finally, the review summarizes some effective strategies and possible challenges for the design of h-BN fillers. This review provides researchers in the field of thermally conductive polymeric composites with a comprehensive understanding of thermal conduction and constructive guidance on h-BN design.

Phospholipid-inspired alkoxylation induces crystallization and cellular uptake of luminescent COF nanocarriers.

The porous nature and structural variability of covalent organic frameworks (COFs) make them preferred for drug loading and delivery applications. However, most COF materials suffer from poor luminescent properties and inefficiency for cell uptake. Herein, we experimentally demonstrate the crucial role of long alkoxy chains in the synthesis of crystalline COF nanostructures with high cellular uptake efficiency. After luminescence integration through band engineering, the semiconducting COF exhibits an optical bandgap of 2.05 eV, an emission wavelength of 632 nm, a high quantum yield of 37 %, and excellent fluorescence stability (100 % at 3 h). Such excellent optical properties of the designed COF nanocarriers enable quantitative evaluations of cellular uptake and visual tracking of drug delivery. It was demonstrated that the cellular uptake efficiency was enhanced by orders of magnitude for the COF after the introduction of long n-octyloxy chains, which firstly delivered the anticancer camptothecin (CPT) to cell lysosomes, and then underwent "endo/lysosomal escape" to induce cell apoptosis. In vivo assay evidenced a significant enhancement in the therapeutic effect with a 96 % inhibition of tumor growth after 14 days of treatment. This progress sheds light on designing cutting-edge drug delivery nanosystems based on COF materials with integrated diagnostic and therapeutic functions.

Synthesis of millimeter-scale ZIF-8 single crystals and their reversible crystal structure changes.

Among various metal-organic frameworks (MOFs), the zeolitic imidazole framework (ZIF), constructed by the regular arrangement of 2-methylimidazole and metal ions, has garnered significant attention due to its distinctive crystals and pore structures. Variations in the sizes and shapes of ZIF crystals have been reported by changing the synthesis parameters, such as the molar ratios of organic ligands to metal ions, choice of solvents, and temperatures. Nonetheless, the giant ZIF-8 single crystals beyond the typical range have rarely been reported. Herein, we present the synthesis of millimeter-scale single crystal ZIF-8 using the solvothermal method in N,N-diethylformamide. The resulting 1-mm single crystal is carefully characterized through N2 adsorption-desorption isotherms, scanning electron microscopy, and other analytical techniques. Additionally, single-crystal X-ray diffraction is employed to comprehensively investigate the framework's mobility at various temperatures.

Millimeter-sized ZIF-8 single crystals were synthesized using the solvothermal method. These crystals exhibit a notable BET surface area of 1681 m²âˆ™g⁻¹ and demonstrate a reversible change in their crystal structure.

Involvement of Degenerating 21.5 kDa Isoform of Myelin Basic Protein in the Pathogenesis of the Relapse in Murine Relapsing-Remitting Experimental Autoimmune Encephalomyelitis and MS Autopsied Brain.

Multiple sclerosis (MS) is the chronic inflammatory demyelinating disease of the CNS. Relapsing-remitting MS (RRMS) is the most common type of MS. However, the mechanisms of relapse and remission in MS have not been fully understood. While SJL mice immunized with proteolipid protein (PLP) develop relapsing-remitting experimental autoimmune encephalomyelitis (RR-EAE), we have recently observed that some of these mice were resistant to the active induction of relapsing EAE after initial clinical and histological symptoms of EAE with a severity similar to the relapsing EAE mice. To clarify the mechanism of relapsing, we examined myelin morphology during PLP139-151-induced RR-EAE in the SJL mice. While RR-EAE mice showed an increased EAE severity (relapse) with CNS inflammation, demyelination with abnormal myelin morphology in the spinal cord, the resistant mice exhibited a milder EAE phenotype with diminished relapse. Compared with the RR-EAE mice, the resistant mice showed less CNS inflammation, demyelination, and abnormalities of the myelin structure. In addition, scanning electron microscopic (SEM) analysis with the osmium-maceration method displayed ultrastructural abnormalities of the myelin structure in the white matter of the RR-EAE spinal cord, but not in that of the resistant mice. While the intensity of myelin staining was reduced in the relapsing EAE spinal cord, immunohistochemistry and immunoblot analysis revealed that the 21.5 kDa isoform of degenerating myelin basic protein (MBP) was specifically induced in the relapsing EAE spinal cord. Taken together, the neuroinflammation-induced degenerating 21 kDa isoform of MBP sheds light on the development of abnormal myelin on the relapse of MS pathogenesis.

Bifurcated distal biceps brachii tendon coexisting with separated bicipital aponeurosis: a complex variational case report.

Variations appearing in biceps brachii muscle are common with accessory head, different origins, variant insertion, and different pattern of nerve innervation. However, variations appearing in both origin and insertion, and with other anomalous morphology at the same time are seldom. Here we report a complex variational case on the right arm of a 91-year-old Japanese female cadaver. The complex variations included (1) the biceps brachii muscle bifurcated at its distal ending; (2) the long head had its own tendon, which divided into two parts, i.e., a lateral part fused into the fascia between the brachioradialis and extensor carpi brevis, and a medial part attached to the radius about one centimeter ahead of the radial tuberosity; (3) the short head had an accessory origin from the shoulder capsule; (4) the bicipital aponeurosis was of two parts with an anterior superior layer formed by the long head and a posterior deep one formed by the short head; (5) the musculocutaneous nerve was especially underdeveloped that only innervated the coracobrachialis; (6) the existence of communicating branch between the musculocutaneous and median nerves, and the median nerve issued muscular branches to the biceps brachii and brachialis muscles, and (7) the brachioradial muscle had two accessory muscular bundles that originated from the fascia of the brachial muscle (proximal one) and from the bicipital aponeurosis (distal one).

Carbon nanotube-decorated hierarchical porous nickel/carbon hybrid derived from nickel-based metal-organic framework for enhanced methyl blue adsorption.

This work reports the incorporation of coordinated water into Ni-BTC nanorods (Ni-BTC-O) which induces their structural transformation to Ni-BTC nanofibres (Ni-BTC-F). The carbonization of the Ni-BTC nanofibres at 600 °C results in the formation of carbon nanotube (CNT)-decorated hierarchical porous nickel/carbon hybrid (labelled as Ni/C-600) with enlarged pores. In contrast, the Ni/C hybrid obtained from the carbonization of the original (unmodified) Ni-BTC nanorods (Ni-BTC-O) at 600 °C (labelled as Ni-BTC-O-600) exhibits smaller pore size and does not show the formation of CNTs. The Ni/C-600 hybrid derived from Ni-BTC-F shows a very high adsorption capacity of 686.8 mg g-1 toward methyl blue (MB) dye. This is approximately 4.8 times higher than the adsorption capacity of Ni-BTC-O-600 (144.1 mg g-1). The higher adsorption performance of Ni/C-600 relative to Ni-BTC-O-600 can be attributed to its larger pore volume, hierarchical porosity, and additional adsorption sites provided by the CNTs. In addition, the Ni/C-600 hybrid can maintain 90% of its adsorption capacity after 5 consecutive cycles, demonstrating its potential as an efficient and recyclable adsorbent for MB dye.

Morphologic observation for anomalous patterns of the flexor carpi radialis muscle and atypical insertions: a proposal for a new classification.

In the present study, four types of variations of the flexor carpi radialis with accessory muscular bundles were classified depending on the origin of the accessory muscular bundle and relationships with the bicipital aponeurosis, biceps brachii, pronator teres, and coracobrachialis. Six types of insertions of the tendon of the flexor carpi radialis were also divided according to their inserted positions on the carpal and metacarpal bones. An accessory muscular bundle of the flexor carpi radialis was found in 4 (1 female and 3 males) of 68 cadavers (5.88%), with five examples in 136 arms (3.68%). It was bilateral in one cadaver and unilateral (two on the right and one on the left) in three. The insertion of the flexor carpi radialis tendon was not only on the proximal surface of the base of the second metacarpal bone but also on the third metacarpal bone, the tubercle of the trapezium, and the scaphoid. These findings and classifications are important in anatomical education, and have important significances in clinical diagnosis and therapies.

Tailoring the Surface and Interface Structures of Copper-Based Catalysts for Electrochemical Reduction of CO2 to Ethylene and Ethanol.

Electrochemical CO2 reduction to valuable ethylene and ethanol offers a promising strategy to lower CO2 emissions while storing renewable electricity. Cu-based catalysts have shown the potential for CO2 -to-ethylene/ethanol conversion, but still suffer from low activity and selectivity. Herein, the effects of surface and interface structures in Cu-based catalysts for CO2 -to-ethylene/ethanol production are systematically discussed. Both reactions involve three crucial steps: formation of CO intermediate, CC coupling, and hydrodeoxygenation of C2 intermediates. For ethylene, the key step is CC coupling, which can be enhanced by tailoring the surface structures of catalyst such as step sites on facets, Cu0 /Cuδ+ species and nanopores, as well as the optimized molecule-catalyst and electrolyte-catalyst interfaces further promoting the higher ethylene production. While the controllable hydrodeoxygenation of C2 intermediate is important for ethanol, which can be achieved by tuning the stability of oxygenate intermediates through the metallic cluster induced special atomic configuration and bimetallic synergy induced the double active sites on catalyst surface. Additionally, constraining CO coverage by the complex-catalyst interface and stabilizing CO bond by N-doped carbon/Cu interface can also enhance the ethanol selectivity. The structure-performance relationships will provide the guidance for the design of Cu-based catalysts for highly efficient reduction of CO2 .

Semiconductor nanochannels in metallic carbon nanotubes by thermomechanical chirality alteration.

Carbon nanotubes have a helical structure wherein the chirality determines whether they are metallic or semiconducting. Using in situ transmission electron microscopy, we applied heating and mechanical strain to alter the local chirality and thereby control the electronic properties of individual single-wall carbon nanotubes. A transition trend toward a larger chiral angle region was observed and explained in terms of orientation-dependent dislocation formation energy. A controlled metal-to-semiconductor transition was realized to create nanotube transistors with a semiconducting nanotube channel covalently bonded between a metallic nanotube source and drain. Additionally, quantum transport at room temperature was demonstrated for the fabricated nanotube transistors with a channel length as short as 2.8 nanometers.

Atomic-scale regulation of anionic and cationic migration in alkali metal batteries.

The regulation of anions and cations at the atomic scale is of great significance in membrane-based separation technologies. Ionic transport regulation techniques could also play a crucial role in developing high-performance alkali metal batteries such as alkali metal-sulfur and alkali metal-selenium batteries, which suffer from the non-uniform transport of alkali metal ions (e.g., Li+ or Na+) and detrimental shuttling effect of polysulfide/polyselenide anions. These drawbacks could cause unfavourable growth of alkali metal depositions at the metal electrode and irreversible consumption of cathode active materials, leading to capacity decay and short cycling life. Herein, we propose the use of a polypropylene separator coated with negatively charged Ti0.87O2 nanosheets with Ti atomic vacancies to tackle these issues. In particular, we demonstrate that the electrostatic interactions between the negatively charged Ti0.87O2 nanosheets and polysulfide/polyselenide anions reduce the shuttling effect. Moreover, the Ti0.87O2-coated separator regulates the migration of alkali ions ensuring a homogeneous ion flux and the Ti vacancies, acting as sub-nanometric pores, promote fast alkali-ion diffusion.

Ti3+ Tuning the Ratio of Cu+ /Cu0 in the Ultrafine Cu Nanoparticles for Boosting the Hydrogenation Reaction.

Hydrogenation of diesters to diols is a vital process for chemical industry. The inexpensive Cu+ /Cu0 -based catalysts are highly active for the hydrogenation of esters, however, how to efficiently tune the ratio of Cu+ /Cu0 and stabilize the Cu+ is a great challenge. In this work, it is demonstrated that doped Ti ions can tune the ratio of Cu+ /Cu0 and stabilize the Cu+ by the TiOCu bonds in Ti-doped SiO2 supported Cu nanoparticle (Cu/Ti-SiO2 ) catalysts for the high conversion of dimethyl adipate to 1,6-hexanediol. In the synthesis of the catalysts, the Ti4+ OCu2+ bonds promote the reduction of Cu2+ to Cu+ by forming Ti3+ OV Cu+ (OV : oxygen vacancy) bonds and the amount of Ti doping can tune the ratio of Cu+ /Cu0 . In the catalytic reaction, the O vacancy activates CO in the ester by forming new Ti3+ δ OR Cu1+ δ bonds (OR : reactant oxygen), and Cu0 activates hydrogen. After the products are desorbed, the Ti3+ δ OR Cu1+ δ bonds return to the initial state of Ti3+ OV Cu+ bonds. The reversible TiOCu bonds greatly improve the activity and stability of the Cu/Ti-SiO2 catalysts. When the content of Ti is controlled at 0.4 wt%, the conversion and selectivity can reach 100% and 98.8%, respectively, and remain stable for 260 h without performance degradation.

In Search of Excellence: Convex versus Concave Noble Metal Nanostructures for Electrocatalytic Applications.

Controlling the shape of noble metal nanoparticles is a challenging but important task in electrocatalysis. Apart from hollow and nanocage structures, concave noble metal nanoparticles are considered a new class of unconventional electrocatalysts that exhibit superior electrocatalytic properties as compared with those of conventional nanoparticles (including convex and flat ones). Herein, several facile and highly reproducible routes for synthesizing nanostructured concave noble metal materials reported in the literature are discussed, together with their advantages over noble metal nanoparticles with convex shapes. In addition, possible ways of optimizing the synthesis procedure and enhancing the electrocatalytic characteristics of concave metal nanoparticles are suggested. Nanostructured noble metals with concave features are found to show better catalytic activity and stability hence improve their practical applicability in electrocatalysis.

Stable single atomic silver wires assembling into a circuitry-connectable nanoarray.

Atomic metal wires have great promise for practical applications in devices due to their unique electronic properties. Unfortunately, such atomic wires are extremely unstable. Here we fabricate stable atomic silver wires (ASWs) with appreciably unoccupied states inside the parallel tunnels of α-MnO2 nanorods. These unoccupied Ag 4d orbitals strengthen the Ag-Ag bonds, greatly enhancing the stability of ASWs while the presence of delocalized 5s electrons makes the ASWs conducting. These stable ASWs form a coherently oriented three-dimensional wire array of over 10 nm in width and up to 1 µm in length allowing us to connect it to nano-electrodes. Current-voltage characteristics of ASWs show a temperature-dependent insulator-to-metal transition, suggesting that the atomic wires could be used as thermal electrical devices.

Tunable Concave Surface Features of Mesoporous Palladium Nanocrystals Prepared from Supramolecular Micellar Templates.

Concave metallic nanocrystals with a high density of low-coordinated atoms on the surface are essential for the realization of unique catalytic properties. Herein, mesoporous palladium nanocrystals (MPNs) that possess various degrees of curvature are successfully synthesized following an approach that relies on a facile polymeric micelle assembly approach. The as-prepared MPNs exhibit larger surface areas compared to conventional Pd nanocrystals and their nonporous counterparts. The MPNs display enhanced electrocatalytic activity for ethanol oxidation when compared to state-of-the-art commercial palladium black and conventional palladium nanocubes used as catalysts. Interestingly, as the degree of curvature increases, the surface-area-normalized activity also increases, demonstrating that the curvature of MPNs and the presence of high-index facets are crucial considerations for the design of electrocatalysts.

A universal approach for the synthesis of mesoporous gold, palladium and platinum films for applications in electrocatalysis.

High-surface-area mesoporous materials expose abundant functional sites for improved performance in applications such as gas storage/separation, catalysis, and sensing. Recently, soft templates composed of amphiphilic surfactants and block copolymers have been used to introduce mesoporosity in various materials, including metals, metal oxides and carbonaceous compounds. In particular, mesoporous metals are attractive in electrocatalysis because their porous networks expose numerous unsaturated atoms on high-index facets that are highly active in catalysis. In this protocol, we describe how to create mesoporous metal films composed of gold, palladium, or platinum using block copolymer micelle templates. The amphiphilic block copolymer micelles are the sacrificial templates and generate uniform structures with tunable pore sizes in electrodeposited metal films. The procedure describes the electrodeposition in detail, including parameters such as micelle diameters, deposition potentials, and deposition times to ensure reproducibility. The micelle diameters can be controlled by swelling the micelles with different solvent mixtures or by using block copolymer micelles with different molecular weights. The deposition potentials and deposition times allow further control of the mesoporous structure and its thickness, respectively. Procedures for example applications are included: glucose oxidation, ethanol oxidation and methanol oxidation reactions. The synthetic methods for preparation of mesoporous metal films will take ~4 h; the subsequent electrochemical tests will take ~5 h for glucose sensing and ~3 h for alcohol oxidation reaction.

Strain engineering of two-dimensional multilayered heterostructures for beyond-lithium-based rechargeable batteries.

Beyond-lithium-ion batteries are promising candidates for high-energy-density, low-cost and large-scale energy storage applications. However, the main challenge lies in the development of suitable electrode materials. Here, we demonstrate a new type of zero-strain cathode for reversible intercalation of beyond-Li+ ions (Na+, K+, Zn2+, Al3+) through interface strain engineering of a 2D multilayered VOPO4-graphene heterostructure. In-situ characterization and theoretical calculations reveal a reversible intercalation mechanism of cations in the 2D multilayered heterostructure with a negligible volume change. When applied as cathodes in K+-ion batteries, we achieve a high specific capacity of 160 mA h g-1 and a large energy density of ~570 W h kg-1, presenting the best reported performance to date. Moreover, the as-prepared 2D multilayered heterostructure can also be extended as cathodes for high-performance Na+, Zn2+, and Al3+-ion batteries. This work heralds a promising strategy to utilize strain engineering of 2D materials for advanced energy storage applications.

Spherical Superstructure of Boron Nitride Nanosheets Derived from Boron-Containing Metal-Organic Frameworks.

The assembly of two-dimensional (2D) nanosheets into three-dimensional (3D) well-organized superstructures is one of the key topics in materials chemistry and physics, due to their potential applications in various fields. Herein, starting from the crystalline metal-organic framework (MOF) particles, a spherical superstructure consisting of metal-organic framework nanosheets (SS-MOFNSs) is synthesized via a simple solvothermal transformation process. After pyrolysis and nitrogenization in ammonia, the SS-MOFNSs are further transformed into the spherical superstructure consisting of boron nitride nanosheets (SS-BNNSs), which preserve the original spherical superstructure morphology. Taking advantage of this unique superstructure, the resulting SS-BNNSs exhibit excellent catalytic activity for selective oxidative dehydrogenation of propane to produce propylene and ethylene. The results of this work provide a novel synthetic strategy to fabricate 3D spherical superstructures consisting of 2D nanosheets for high-performance applications in catalysis, energy storage, as well as other related fields.