Multicomponent nanoparticles as means to improve anaerobic digestion performance.

Sufficient quantity of trace metals is essential for a well performing anaerobic digestion (AD) process. Among the essential trace elements in active sites of multiple important enzymes for AD are iron and nickel ions. In the present study, iron and nickel in the form of Fe2O3 and NiO were coated on TiO2 nanoparticles to be used in batch and continuous operation mode. The effect of TiO2, Fe2O3-TiO2, and NiO-TiO2 nanoparticles on each step of AD process was assessed utilizing simple substrates (i.e. cellulose, glucose, acetic acid, and mixture of H2-CO2) as well as complex ones (i.e. municipal biopulp). The hydrolysis rate of cellulose substrate increased with higher dosages of the coated TiO2 with both metals. For instance, the hydrolysis rate was increased up to 54% at Fe2O3-TiO2 and at a concentration of 23.5 mg/L for NiO-TiO2 it was increased up to 58%, while higher dosage suppressed the hydrolytic activity. Experimental results revealed that low dosages of NiO-TiO2 increased the accumulated methane production up to 24% probably by increasing the enzymatic activity of acetoclastic methanogenesis. NiO-TiO2 showed positive effect on batch and continuous AD of biopulp and improved methane yield up to 8%.

Anti-algal activity of Fe2O3-TiO2 photocatalyst on Chlorella vulgaris species under visible light irradiation.

Many industries located in coastal areas use a large amount of seawater. Algal biofouling can be a major problem that hinders the efficiency of these industrial facilities. In most cases, seawater requires algal removal pre-treatment to avoid or mitigate biofilm formation. To remediate green microalgae, Fe2O3-TiO2 nanoparticles with 2.5% w/w Fe2O3 were applied as a visible light driven photocatalyst. The anti-algal activity of the photocatalytic pre-treatment using green microalgae, Chlorella vulgaris was tested. The experiments were carried out in freshwater, artificial seawater, and real seawater. Effect of photocatalyst dosage, visible light intensity, and water salinity on the removal of microalgae was investigated. The highest inactivation efficiency of Chlorella vulgaris was achieved under 55 W/m2 visible light irradiation when 0.25 g/L of Fe2O3-TiO2 photocatalyst was used. The photocatalytic removal kinetics of Chlorella vulgaris followed the pseudo first order Langmuir-Hinshelwood model. The results revealed that the efficiency of photocatalytic removal of algae decreased with increasing of seawater salinity. The anti-algal activity of Fe2O3-TiO2 nanoparticles was attributed to the generation of reactive oxygen species (ROS) through the photocatalytic process. H+ radical was shown to be the most important ROS that nanoparticles produced in the aqueous media. Using Fe2O3-TiO2 nanoparticles in photocatalytic pre-treatment could be an efficient environmental-friendly method for micro-algal remediation in seawater under visible light.

Application of nano-structured materials in anaerobic digestion: Current status and perspectives.

Nanotechnology is gaining more attention in biotechnological applications as a research area with a huge potential. Nanoparticles (NPs) can influence the rate of anaerobic digestion (AD) as the nano-sized structures, with specific physicochemical properties, interact with substrate and microorganisms. The present work has classified the various types of additives used to improve the AD processes. Nanomaterials as new additives in AD process are classified into four categories: Zero-valent metallic NPs, Metal oxide NPs, Carbon based nanomaterials, and Multi-compound NPs. In the following, application of nanomaterials in AD process is reviewed and negative and positive effects of these materials on the AD process and subsequently biogas production rate are discussed. This study confirms that design and development of new nano-sized compounds can improve the performances of the AD processes.

Photocatalytic inactivation of Vibrio fischeri using Fe2O3-TiO2-based nanoparticles.

Biofouling is a major problem in water membrane processes, especially in seawater reverse osmosis plants. Inactivation of Vibrio fischeri (a well-known marine bacterium forming biofilm) through photocatalysis via visible light was investigated in this work using active Fe2O3-TiO2 nanoparticles. Five Fe2O3-TiO2 photocatalysts with different weight percentage of Fe2O3 (0-5 wt%) were synthesized using an ultrasonic-assisted co-precipitation method. The photocatalysts were characterized by powder X-ray diffraction (XRD), BET surface area, transmission electron Æ (TEM) plus selected area electron diffraction (SAED) patterns, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and diffuse-reflectance spectroscopy (DRS). Based on the design of experiments, the synthesized photocatalysts were tested for inactivation of V. fischeri under visible light irradiation at different temperatures (25-35 °C) and different photocatalyst dosage (0.1-2 g/L). The photocatalytic microbial inactivation experiments were performed in artificial seawater appropriate for growth of the marine bacterium. The results revealed that the highest inactivation efficiency of V. fischeri was achieved when 1 g/L of 2.5 wt% Fe2O3-TiO2 were used, at 35 °C. Photocatalytic inactivation of microorganisms using visible light-driven Fe2O3-TiO2 photocatalysts, could introduce an innovative green method in pretreatment units of reverse osmosis plants to control the membrane biofouling.