Recovering Rare Earth Elements from Aqueous Solution with Porous Amine-Epoxy Networks.

Recovering aqueous rare earth elements (REEs) from domestic water sources is one key strategy to diminish the U.S.'s foreign reliance of these precious commodities. Herein, we synthesized an array of porous, amine-epoxy monolith and particle REE recovery sorbents from different polyamine, namely tetraethylenepentamine, and diepoxide (E2), triepoxide (E3), and tetra-epoxide (E4) monomer combinations via a polymer-induced phase separation (PIPS) method. The polyamines provided -NH2 (primary amine) plus -NH (secondary amine) REE adsorption sites, which were partially reacted with C-O-C (epoxide) groups at different amine/epoxide ratios to precipitate porous materials that exhibited a wide range of apparent porosities and REE recoveries/affinities. Specifically, polymer particles (ground monoliths) were tested for their recovery of La3+, Nd3+, Eu3+, Dy3+, and Yb3+ (Ln3+) species from ppm-level, model REE solutions (pH ≈ 2.4, 5.5, and 6.4) and a ppb-level, simulated acid mine drainage (AMD) solution (pH ≈ 2.6). Screening the sorbents revealed that E3/TEPA-88 (88% theoretical reaction of -NH2 plus -NH) recovered, overall, the highest percentage of Ln3+ species of all particles from model 100 ppm- and 500 ppm-concentrated REE solutions. Water swelling (monoliths) and ex situ, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) (ground monoliths/particles) data revealed the high REE uptake by the optimized particles was facilitated by effective distribution of amine and hydroxyl groups within a porous, phase-separated polymer network. In situ DRIFTS results clarified that phase separation, in part, resulted from polymerization of the TEPA-E3 (N-N-diglycidyl-4-glycidyloxyaniline) species in the porogen via C-N bond formation, especially at higher temperatures. Most importantly, the E3/TEPA-88 material cyclically recovered >93% of ppb-level Ln3+ species from AMD solution in a recovery-strip-recovery scheme, highlighting the efficacy of these materials for practical applications.

Continuous Flow Processing of ZIF-8 Membranes on Polymeric Porous Hollow Fiber Supports for CO2 Capture.

We have utilized an environmentally friendly synthesis approach for the accelerated growth of a selective inorganic membrane on a polymeric hollow fiber support for postcombustion carbon capture. Specifically, continuous defect-free ZIF-8 thin films were grown and anchored using continuous flow synthesis on the outer surface of porous supports using water as solvent. These membranes demonstrated CO2 permeance of 22 GPU and the highest reported CO2/N2 selectivity of 52 for a continuous flow synthesized ZIF-8 membrane.

Cell adhesion of Shewanella oneidensis to iron oxide minerals: Effect of different single crystal faces.

The results of experiments designed to test the hypothesis that near-surface molecular structure of iron oxide minerals influences adhesion of dissimilatory iron reducing bacteria are presented. These experiments involved the measurement, using atomic force microscopy, of interaction forces generated between Shewanella oneidensis MR-1 cells and single crystal growth faces of iron oxide minerals. Significantly different adhesive force was measured between cells and the (001) face of hematite, and the (100) and (111) faces of magnetite. A role for electrostatic interactions is apparent. The trend in relative forces of adhesion generated at the mineral surfaces is in agreement with predicted ferric site densities published previously. These results suggest that near-surface structure does indeed influence initial cell attachment to iron oxide surfaces; whether this is mediated via specific cell surface-mineral surface interactions or by more general interfacial phenomena remains untested.