ABSTRACT
BACKGROUND: Major depressive disorder (MDD) poses a significant global health burden with available treatments limited by inconsistent efficacy and notable side effects. Classic psychedelics, including lysergic acid diethylamide (LSD), have garnered attention for their potential in treating psychiatric disorders. Microdosing, the repeated consumption of sub-hallucinogenic doses of psychedelics, has emerged as a self-treatment approach for depression within lay communities. Building upon preliminary evidence and the successful completion of an open-label pilot trial of microdosing LSD for depression (LSDDEP1), this protocol outlines a phase 2b randomised controlled trial (LSDDEP2). The main objective of LSDDEP2 is to assess the modification of depressive symptoms, measured by the Montgomery-Åsberg Depression Rating Scale (MADRS), following a regimen of LSD microdoses versus placebo. METHODS: This is a randomised, double-dummy, triple-blind, active placebo-controlled, parallel groups trial of LSD microdosing in patients meeting DSM-5 criteria for major depressive disorder. Participants will undergo an 8-week LSD microdosing regimen using the titratable MB-22001 formulation taking two doses a week. All doses will be self-administered at home and will be titratable from 4 to 20 µg based on subjective perception and tolerability. In addition to depression symptoms, outcome will include psychiatric and personality inventories, sleep and activity tracking, electroencephalography (EEG), blood biomarkers, semi-structured interviews, and safety (e.g. adverse event, laboratory exam) measures. DISCUSSION: This study will be the first randomised controlled trial to administer controlled microdoses of LSD for treatment of MDD in participants' naturalistic environment. The measures included are designed to assess the drug's safety, mechanism, and treatment efficacy over placebo in this population. The results of this study will be important for assessing the viability of psychedelic microdosing as an additional treatment option and for informing the direction of future clinical trials. TRIAL REGISTRATION: ANZCTR, ACTRN12624000128594. Prospectively Registered on 13 February 2024.
Subject(s)
Depressive Disorder, Major , Hallucinogens , Lysergic Acid Diethylamide , Randomized Controlled Trials as Topic , Humans , Depressive Disorder, Major/drug therapy , Depressive Disorder, Major/psychology , Lysergic Acid Diethylamide/administration & dosage , Lysergic Acid Diethylamide/adverse effects , Hallucinogens/administration & dosage , Hallucinogens/adverse effects , Double-Blind Method , Treatment Outcome , Adult , Clinical Trials, Phase II as Topic , Male , Female , Middle Aged , Young Adult , Time FactorsABSTRACT
The potential application of colloidal polyaniline (PANI) as an antimicrobial is limited by challenges related to solubility in common organic solvents, scalability, and antimicrobial potency. To address these limitations, we introduced a functionalized PANI (fPANI) with carboxyl groups through the polymerisation of aniline and 3-aminobenzoic acid in a 1:1 molar ratio. fPANI is more soluble than PANI which was determined using a qualitative study. We further enhanced the solubility and antimicrobial activity of fPANI by incorporating Ag nanoparticles onto the synthesized fPANI colloid via direct addition of 10â¯mM AgNO3. The improved solubility can be attributed to an approximately 3-fold reduction in size of particles. Mean particle sizes are measured at 1322â¯nm for fPANI colloid and 473â¯nm for fPANI-Ag colloid, showing a high dispersion and deagglomeration effect from Ag nanoparticles. Antimicrobial tests demonstrated that fPANI-Ag colloids exhibited superior potency against Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli, and Bacteriophage PhiX 174 when compared to fPANI alone. The minimum bactericidal concentration (MBC) and minimum virucidal concentration (MVC) values were halved for fPANI-Ag compared to fPANI colloid and attributed to the combination of Ag nanoparticles with the fPANI polymer. The antimicrobial fPANI-Ag colloid presented in this study shows promising results, and further exploration into scale-up can be pursued for potential biomedical applications.
Subject(s)
Aniline Compounds , Colloids , Escherichia coli , Microbial Sensitivity Tests , Particle Size , Silver , Staphylococcus aureus , Aniline Compounds/chemistry , Aniline Compounds/pharmacology , Aniline Compounds/chemical synthesis , Colloids/chemistry , Escherichia coli/drug effects , Staphylococcus aureus/drug effects , Silver/chemistry , Silver/pharmacology , Metal Nanoparticles/chemistry , Anti-Infective Agents/pharmacology , Anti-Infective Agents/chemistry , Anti-Infective Agents/chemical synthesis , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , SolubilityABSTRACT
BACKGROUND: An advanced cancer diagnosis can be associated with a significant profile of distress. Psychedelic compounds have shown clinically significant effects in the treatment of psychological distress in patients with advanced-stage cancer. Given the challenges of delivering timely and effective intervention in the advanced cancer context, it is possible that an alternative, more pragmatic, approach lies in psychedelic 'microdosing'. Microdosing refers to repeated administration of psychedelics in sub-hallucinogenic doses. The purpose of this study is to evaluate the feasibility of conducting a full-scale randomised controlled trial comparing psychedelic microdose-assisted-meaning-centred psychotherapy (PA-MCP) to standard meaning-centred psychotherapy (MCP) in New Zealand indigenous (Maori) and non-indigenous people with advanced cancer and symptoms of anxiety and/or depression. Although MCP is a well-established psychotherapeutic treatment in advanced cancer populations, the potential efficacy and effectiveness of this therapy when delivered alongside a standardised microdose regimen of a psychedelic compound have not been investigated. METHODS: Participants with advanced-stage cancer and symptoms of anxiety and/or depression (N = 40; 20 Maori, 20 non-Maori) will be randomised under double-blind conditions to receive 7 sessions of MCP alongside 13 doses of either an LSD microdose (4-20 µg) (PA-MCP) or inactive placebo (placebo-MCP). The feasibility, acceptability, and safety of this intervention and physiological and psychological measures will be recorded at baseline, at each session of MCP, and at a 1-month and 6-month follow-up. DISCUSSION: Our findings will evaluate the feasibility, acceptability, and safety of a larger randomised controlled trial and provide an initial indication of the potential benefits of psychedelic microdosing for psychological distress in advanced-stage indigenous and non-indigenous cancer patients. TRIAL REGISTRATION: NZCTR, ACTRN12623000478617. Registered 11 May 2023. https://www.anzctr.org.au/Trial/Registration/TrialReview.aspx?id=385810&isReview=true .
ABSTRACT
BACKGROUND: Globally, an estimated 260 million people suffer from depression [1], and there is a clear need for the development of new, alternative antidepressant therapies. In light of problems with the tolerability and efficacy of available treatments [2], a global trend is emerging for patients to self-treat depression with microdoses of psychedelic drugs such as lysergic acid diethylamide (LSD) and psilocybin [3]. Beyond anecdotal reports from those who self-medicate in this way, few clinical trials have evaluated this practice. In our recently published phase 1 study in healthy volunteers [4], we determined that LSD microdosing was relatively safe and well tolerated in that cohort. Furthermore, the data demonstrated that conducting such microdosing trials is broadly feasible, with excellent adherence and compliance to the regimen observed. In this open-label pilot trial of patients with major depressive disorder (LSDDEP1), we will test the tolerability and feasibility of an 8-week regimen of LSD microdosing in this patient group prior to a larger subsequent randomised controlled trial (LSDDEP2). METHODS: Twenty patients meeting the DSM-5 criteria for major depressive disorder will receive an 8-week LSD microdosing treatment regimen. The treatment protocol will use a sublingual formulation of LSD (MB-22001) delivered twice per week under a titration schedule using a dose of 5-15 µg. Tolerability will be assessed by quantifying the percentage of participants who withdraw from the trial due to adverse events attributable to the treatment regimen, while feasibility will be assessed by quantifying the percentage of attended clinic visits once enrolled. To determine whether there is any antidepressant response to the LSD microdosing regimen, MADRS scores will be assessed at baseline and 2, 4, 6, and 8 weeks after the commencement of the regimen. DISCUSSION: The results of LSDDEP1 will provide valuable information regarding the tolerability and feasibility of a proposed LSD microdosing regimen in patients with MDD. Such information is critically important to optimise trial design prior to commencing a subsequent and more resource-intensive randomised controlled trial. TRIAL REGISTRATION: ANZCTR, ACTRN12623000486628. Registered on 12 May 2023.
ABSTRACT
Electrically modulated delivery of proteins provides an avenue to target local tissues specifically and tune the dose to the application. This approach prolongs and enhances activity at the target site whilst reducing off-target effects associated with systemic drug delivery. The work presented here explores an electrically active composite material comprising of a biocompatible hydrogel, gelatin methacryloyl (GelMA) and a conducting polymer, poly(3,4-ethylenedioxythiophene), generating a conducting polymer hydrogel. In this paper, the key characteristics of electroactivity, mechanical properties, and morphology are characterized using electrochemistry techniques, atomic force, and scanning electron microscopy. Cytocompatibility is established through exposure of human cells to the materials. By applying different electrical-stimuli, the short-term release profiles of a model protein can be controlled over 4 h, demonstrating tunable delivery patterns. This is followed by extended-release studies over 21 days which reveal a bimodal delivery mechanism influenced by both GelMA degradation and electrical stimulation events. This data demonstrates an electroactive and cytocompatible material suitable for the delivery of protein payloads over 3 weeks. This material is well suited for use as a treatment delivery platform in tissue engineering applications where targeted and spatio-temporal controlled delivery of therapeutic proteins is required. STATEMENT OF SIGNIFICANCE: Growth factor use in tissue engineering typically requires sustained and tunable delivery to generate optimal outcomes. While conducting polymer hydrogels (CPH) have been explored for the electrically responsive release of small bioactives, we report on a CPH capable of releasing a protein payload in response to electrical stimulus. The composite material combines the benefits of soft hydrogels acting as a drug reservoir and redox-active properties from the conducting polymer enabling electrical responsiveness. The CPH is able to sustain protein delivery over 3 weeks, with electrical stimulus used to modulate release. The described material is well suited as a treatment delivery platform to deliver large quantities of proteins in applications where spatio-temporal delivery patterns are paramount.
Subject(s)
Hydrogels , Polymers , Humans , Polymers/chemistry , Hydrogels/chemistry , Tissue Engineering/methods , Drug Delivery Systems , Electricity , Gelatin/chemistryABSTRACT
This manuscript addresses the need for new soft biomaterials that can be fabricated on the surface of microelectrodes to reduce the mechanical mismatch between biological tissues and electrodes and improve the performance at the neural interface. By electrochemical polymerization of poly(3,4-dioxythiophene) (PEDOT)/polystyrene sulfonate (PSS) through a gelatin methacrylate (GelMA) hydrogel, we demonstrate the synthesis of a conducting polymer hydrogel (CPH) to meet the performance criteria of bioelectrodes. The hybrid material can be photolithographically patterned and covalently attached to gold microelectrodes, forming an interpenetrating network, as confirmed by infrared spectroscopy. The GelMA/PEDOT/PSS coatings were found to be reversibly electroactive by cyclic voltammetry and had low impedance compared to bare gold and GelMA-coated microelectrodes. The CPH coatings showed impedance at levels similar to conventional PEDOT/PSS coatings at a frequency of 1000 Hz. CPH exhibited electrochemical stability over 1000 CV cycles, and its performance was maintained over 14 days. Biocompatibility of the CPH coatings was confirmed by primary hippocampal neuronal cultures via a neuronal viability assay. The CPH-coated microelectrode arrays (MEAs) successfully recorded neuronal activity from primary hippocampal neuronal cells. The CPH GelMA/PEDOT/PSS is a highly promising coating material to enhance microelectrode performance at the neural interface.
Subject(s)
Gelatin , Methacrylates , Bridged Bicyclo Compounds, Heterocyclic , Gold , Hydrogels/chemistry , Microelectrodes , Polymers , PolystyrenesABSTRACT
Recent advances in drug delivery have made it possible to release bioactive agents from neural implants specifically to local tissues. Conducting polymer coatings have been explored as a delivery platform in bioelectronics, however, their utility is restricted by their limited loading capacity and stability. This study presents the fabrication of a stable conducting polymer hydrogel (CPH), comprising the hydrogel gelatin methacrylate (GelMA), and conducting polymer polypyrrole (PPy) for the electrically controlled delivery of glutamate (Glu). The hybrid GelMA/PPy/Glu can be photolithographically patterned and covalently bonded to an electrode. Fourier-transform infrared (FTIR) analysis confirmed the interpenetrating nature of PPy through the GelMA hydrogels. Electrochemical polymerisation of PPy/Glu through the GelMA hydrogels resulted in a significant increase in the charge storage capacity as determined by cyclic voltammetry (CV). Long-term electrochemical and mechanical stability was demonstrated over 1000 CV cycles and extracts of the materials were cytocompatible with SH-SY5Y neuroblastoma cell lines. Release of Glu from the CPH was responsive to electrical stimulation with almost five times the amount of Glu released upon constant reduction (-0.6 V) compared to when no stimulus was applied. Notably, GelMA/PPy/Glu was able to deliver almost 14 times higher amounts of Glu compared to conventional PPy/Glu films. The described CPH coatings are well suited in implantable drug delivery applications and compared to conducting polymer films can deliver higher quantities of drug in response to mild electrical stimulus. STATEMENT OF SIGNIFICANCE: Conducting polymer hydrogels (CPH) have been explored for the electrically controlled release of bioactives from implantable devices. Typically, the conducting polymer component does not fully penetrate the hydrogel. We report, for the first time, a completely interpenetrating CPH allowing for the full benefits of the composite material to be realised, the hydrogels provide a reservoir for drug delivery, and conducting polymer renders the material responsive to electrical stimulation for drug release. We report a CPH for the electrically controlled delivery of glutamate (excitatory neurotransmitter) where several-fold more glutamate can be delivered compared to conducting polymer films. The described CPH coatings are well suited for use in bioelectronic devices to deliver large quantities of drug in response to mild electrical stimulus.
Subject(s)
Hydrogels , Polymers , Gelatin , Glutamic Acid , PyrrolesABSTRACT
Electrically responsive drug delivery is an attractive approach for the localised, tuneable release of drugs to meet therapeutic demands. Conducting polymers and hydrogels have been explored individually as materials for drug delivery applications with hybrids of these two materials offering potential to extend the range and amount of drug delivered, thereby creating new opportunities to achieve real-world benefit. Although accurate and long-term on-demand release of drugs through conducting polymer hydrogels still presents challenges, these are promising materials for the next generation of electrically responsive drug delivery devices. Here we review the fabrication methods and properties of conducting polymer hydrogels, relevant to drug delivery. In addition, the mechanisms behind drug loading and release are discussed, and applications for these systems presented. The current state of the field is discussed, alongside future steps required to achieve successful translation of these materials to the clinic.
Subject(s)
Hydrogels , Polymers , Drug Delivery Systems , ElectricityABSTRACT
OBJECTIVES: In this paper, we aim to detail the setup of a high spatio-temporal resolution, electrical recording system utilising planar microelectrode arrays with simultaneous optical imaging suitable for evaluating microelectrode performance with a proposed 'performance factor' metric. METHODS: Techniques that would facilitate low noise electrical recordings were coupled with voltage sensitive dyes and neuronal activity was recorded both electrically via a customised amplification system and optically via a high speed CMOS camera. This technique was applied to characterise microelectrode recording performance of gold and poly(3,4-ethylenedioxythiophene)/polystyrene sulfonate (PEDOT/PSS) coated electrodes through traditional signal to noise (SNR) calculations as well as the proposed performance factor. RESULTS: Neuronal activity was simultaneously recorded using both electrical and optical techniques and this activity was confirmed via tetrodotoxin application to inhibit action potential firing. PEDOT/PSS outperformed gold using both measurements, however, the performance factor metric estimated a 3 fold improvement in signal transduction when compared to gold, whereas SNR estimated an 8 fold improvement when compared to gold. CONCLUSION: The design and functionality of a system to record from neurons both electrically, through microelectrode arrays, and optically via voltage sensitive dyes was successfully achieved. SIGNIFICANCE: The high spatiotemporal resolution of both electrical and optical methods will allow for an array of applications such as improved detection of subthreshold synaptic events, validation of spike sorting algorithms and a provides a robust evaluation of extracellular microelectrode performance.
Subject(s)
Action Potentials/physiology , Electrodes, Implanted , Microelectrodes , Neurons/physiology , Algorithms , Gold/chemistry , Humans , Polymers/chemistry , Signal Transduction/physiologyABSTRACT
The fabrication of stretchable conductive material through vapor phase polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT) is presented alongside a method to easily pattern these materials with nanosecond laser structuring. The devices were constructed from sheets of vapor phase polymerized PEDOT doped with tosylate on pre-stretched elastomeric substrates followed by laser structuring to achieve the desired geometrical shape. Devices were characterized for electrical conductivity, morphology, and electrical integrity in response to externally applied strain. Fabricated PEDOT sheets displayed a conductivity of 53.1 ± 1.2 S cm-1; clear buckling in the PEDOT microstructure was observed as a result of pre-stretching the underlying elastomeric substrate; and the final stretchable electronic devices were able to remain electrically conductive with up to 100% of externally applied strain. The described polymerization and fabrication steps achieve highly processable and patternable functional conductive polymer films, which are suitable for stretchable electronics due to their ability to withstand externally applied strains of up to 100%.
ABSTRACT
In New Zealand, there are no liquid formulations of omeprazole commercially available, therefore suspensions must be extemporaneously compounded from solid dosage forms for patients with swallowing difficulties. The funding for solid dosage forms of omeprazole changes frequently, often every one to two years, without consideration of the impact this may have when extemporaneously compounded liquid dosage forms are required. This study examined suspensions compounded from various solid dosage forms of omeprazole with the purpose of identifying suitable quality formulations and evaluating their chemical and physical stability. Six different solid dosage forms of omeprazole that are available in New Zealand, including capsules, tablets, and powder, were used to prepare 2-mg/mL suspensions in 8.4% w/v sodium bicarbonate solution. The suspensions were then assessed visually for quality and by quantifying sedimentation rate over 120 minutes. Two products, stored in amber bottles at either 4°C or 25°C, demonstrated acceptable quality over a 30-day period whilst monitoring physical and chemical stability on day 0, 7, 14, 20, and 30. Four of the formulated suspensions were deemed to be of poor quality due to either a lack of uniformity or rapid sedimentation, attributes that could lead to inaccurate dosing. Acceptable quality suspensions were prepared from Losec and Dr. Reddy's brands of omeprazole 20-mg capsules. For both brands, a change in color was observed after 20 days and 7 days when stored at 4°C and 25°C, respectively. Chemical stability was determined using a stability-indicating high-performance liquid chromatographic method, with >90% of the active remaining for 30 days when kept at 4°C, and 20 days when stored at 25°C. Not all brands are suitable for extemporaneously compounding omeprazole suspensions. Losec and Dr. Reddy's brands of capsules were suitable to prepare quality omeprazole suspensions. Omeprazole suspensions compounded from these products are stable for 20 days if stored at 4°C and protected from light.
Subject(s)
Omeprazole , Chromatography, High Pressure Liquid , Drug Compounding/methods , Drug Stability , Drug Storage , Humans , Omeprazole/chemistry , Suspensions , TabletsABSTRACT
Microfluidics-based gradient generators have been used for various biological applications, specifically chemotaxis in cell culture. However, the ability to generate and maintain long term gradients alongside the ability to quickly switch solutions is a challenge of the current microfabricated systems. In this study, a simple flow-driven microfluidic system was developed to achieve long-term stable concentration gradients. Computational modelling was performed to highlight the fluid dynamics as well as to verify the ability of maintaining stable gradients over 7 days. Numerical simulation was analysed to evaluate the static pressure, velocity magnitude and wall shear stress distribution in the chamber. A microdevice fabricated with polydimethylsiloxane (PDMS), using a standard soft lithography technique is presented. It consists of eight parallel microchannels (5 µm × 30 µm × 1,800 µm) linking source and sink chambers; a syringe pump drives fluid through the sink chamber, advection/diffusion from source to sink establishes a gradient. A gradient of a fluorescent dye was generated under the low flow control at 1-10 µl/h of a simple syringe pump equipped with a pulsation damper that was comparable to a pulseless microfluidic pump. Concentration gradients were formed in 1 h and stable from 2 h out to 5 days and consuming less than 1.0 ml of solution. This study focuses on a novel solution to achieve a long-term microfluidic gradient generator using simple engineering techniques of biomedical microdevices.
Subject(s)
Lab-On-A-Chip Devices , Calibration , Computer Simulation , Equipment Design , Time FactorsABSTRACT
(1) Background: Despite the growing use of e-cigarettes, in most countries, there is no regulation covering manufacturing standards of the solution ('e-liquid'), leading to concerns over the accuracy of labelling and stability of the products under a range of conditions. Following the United States (US) Food and Drug Administration (FDA) requirements for manufacture of e-liquids, we aimed to develop a simple high-performance liquid chromatography (HPLC) method to determine nicotine content in nicotine-containing e-liquids, even in the presence of degradation products; (2) Methods: We developed an HPLC method to quantify nicotine in the presence of the two major constituents of all e-liquids, glycerine and propylene glycol, and in the presence of degradation products; (3) Results: Our HPLC method performed strongly and was validated it according to international guidelines. For the e-liquids tested, nicotine content levels were all higher than labelled (up to 117.9 ± 1.87% of the labelled content). While nicotine was shown to be unstable at 60 °C, it was stabilized at this temperature in the e-liquid formulations for up to 10 days; and (4) Conclusions: The HPLC method is suitable for adoption by laboratories to determine the actual content and stability of nicotine-containing products. The higher than labelled nicotine levels in e-liquids raises clinical and public health concerns.
Subject(s)
Chromatography, High Pressure Liquid/methods , Electronic Nicotine Delivery Systems/standards , Nicotine/analysis , Commerce/standards , Glycerol/analysis , Humans , Product Labeling/standards , Propylene Glycol/analysis , Reproducibility of ResultsABSTRACT
An understanding of biological fluids at the site of administration is important to predict the fate of drug delivery systems in vivo. Little is known about peritoneal fluid; therefore, we have investigated this biological fluid and compared it to phosphate-buffered saline, a synthetic media commonly used for in vitro evaluation of intraperitoneal drug delivery systems. Human peritoneal fluid samples were analysed for electrolyte, protein and lipid levels. In addition, physicochemical properties were measured alongside rheological parameters. Significant inter-patient variations were observed with regard to pH (p < 0.001), buffer capacity (p < 0.05), osmolality (p < 0.001) and surface tension (p < 0.05). All the investigated physicochemical properties of peritoneal fluid differed from phosphate-buffered saline (p < 0.001). Rheological examination of peritoneal fluid demonstrated non-Newtonian shear thinning behaviour and predominantly exhibited the characteristics of an entangled network. Inter-patient and inter-day variability in the viscosity of peritoneal fluid was observed. The solubility of the local anaesthetic lidocaine in peritoneal fluid was significantly higher (p < 0.05) when compared to phosphate-buffered saline. Interestingly, the dissolution rate of lidocaine was not significantly different between the synthetic and biological media. Importantly, and with relevance to intraperitoneal drug delivery systems, the sustained release of lidocaine from a thermosensitive gel formulation occurred at a significantly faster rate into peritoneal fluid. Collectively, these data demonstrate the variation between commonly used synthetic media and human peritoneal fluid. The differences in drug release rates observed illustrate the need for bio-relevant media, which ultimately would improve in vitro-in vivo correlation.
Subject(s)
Ascitic Fluid/chemistry , Drug Delivery Systems , Sodium Chloride/chemistry , Anesthetics, Local/chemistry , Buffers , Drug Liberation , Electrolytes/analysis , Gels , Humans , Hydrogen-Ion Concentration , Lidocaine/chemistry , Lipids/analysis , Osmolar Concentration , Proteins/analysis , Rheology , Solubility , Surface PropertiesABSTRACT
We report the fabrication of PEDOT films using vapour phase polymerisation with Fe(III)tosylate as the oxidant and to provide the doping ion. Multiple polymerisation steps resulted in the formation of free-standing PEDOT films. The PEDOT films were highly conductive, a single layer was 1840±50S/cm with a small decrease in conductivity for the five layered films to 1550±60S/cm. The five-layered films were flexible and freestanding in air with a thickness of 1.66±0.06µm. The ability of the freestanding PEDOT films to act as electrically tuneable rate controlling membranes was determined for nicotine (MW 162.2Da), dexamethasone phosphate (MW 516.4Da) and bovine lactoferrin (MW 80kDa), using a customised Franz cell. The membranes were highly permeable to nicotine and dexamethasone phosphate, however, the large lactoferrin molecules could not diffuse through the PEDOT membranes. The permeability of dexamethasone phosphate could be controlled electrically with an increase in flux observed when the membranes were maintained in the oxidised state compared to the reduce state. This is the first report where free standing PEDOT films were prepared by vapour phase polymerisation; these films were capable of electrically modifiable permeation of small drug molecules. The free standing and highly conductive PEDOT membranes are exciting materials to explore for molecular separation and drug delivery applications.
Subject(s)
Bridged Bicyclo Compounds, Heterocyclic/chemistry , Gases/chemistry , Membranes, Artificial , Pharmaceutical Preparations/metabolism , Polymers/chemistry , Dexamethasone/analogs & derivatives , Dexamethasone/chemistry , Dexamethasone/metabolism , Electric Conductivity , Electrochemical Techniques , Lactoferrin/chemistry , Lactoferrin/metabolism , Nicotine/chemistry , Nicotine/metabolism , Oxidation-Reduction , Permeability , Pharmaceutical Preparations/chemistry , Polymerization , Spectroscopy, Fourier Transform InfraredABSTRACT
The poor solubility of significant number of Active Pharmaceutical Ingredients (APIs) has become a major challenge in the drug development process. Drugs with poor solubility are difficult to formulate by conventional methods and often show poor bioavailability. In the last decade, attention has been focused on developing nanocrystals for poorly water soluble drugs using nanosizing techniques. Nanosizing is a pharmaceutical process that changes the size of a drug to the sub-micron range in an attempt to increase its surface area and consequently its dissolution rate and bioavailability. The effectiveness of nanocrystal drugs is evidenced by the fact that six FDA approved nanocrystal drugs are already on the market. The bioavailabilities of these preparations have been significantly improved compared to their conventional dosage forms. There are two main approaches for preparation of drug nanocrystals; these are the top-down and bottom-up techniques. Top-down techniques have been successfully used in both lab scale and commercial scale manufacture. Bottom-up approaches have not yet been used at a commercial level, however, these techniques have been found to produce narrow sized distribution nanocrystals using simple methods. Bottom-up techniques have been also used in combination with top-down processes to produce drug nanoparticles. The main aim of this review article is to discuss the various methods for nanosizing drugs to improve their bioavailabilities.
Subject(s)
Chemistry, Pharmaceutical/methods , Nanoparticles/chemistry , Pharmaceutical Preparations/chemistry , Biological Availability , Particle SizeABSTRACT
Bacoside A, a major active principle of Bacopa monnieri known for its cognitive effects is a mixture of saponins like bacoside A3, bacopaside II, isomer of bacopasaponin C and bacopasaponin C. Seasonal changes in biomass and bacoside A levels in fourteen accessions of B. monnieri were evaluated after maintaining these at a common site at Thapar University campus, Patiala (30°19'36.12â³N and 76°24'1.08â³E) for 1 year. Harvestable biomass and total bacoside A contents varied significantly between the accessions and also in a particular accession during different seasons of the year. The maximum dry weight of plant (biomass 1.64 g) and bacoside A levels (6.82 mg/plant) were recorded in accession BM1. Harvestable biomass was highest during summer in accessions BM1 and BM7 (FW 4.2 g/plant), whereas bacoside A levels were also highest during summer and in accession BM1 (6.82 mg/plant). The lowest bacoside A level (0.06 mg/plant) was recorded in accession BM14 during winter. Principal component analysis showed that samples of summer were positively correlated with both the components suggesting an appropriate time for the harvest.