TOCN/copper calcium titanate composite aerogel films as high-performance triboelectric materials for energy harvesting.

The development of high-performance cellulose-based triboelectric nanogenerators (TENG) has been a subject widely concerned by researchers. Here, we prepared a composite aerogel film based on TEMPO-oxidized cellulose nanofiber (TOCN) and copper calcium titanate (CaCu3Ti4O12, CCTO) nanoparticles. Under their comprehensive effects of the enhanced dielectric performance, the TOCN/CCTO-20 composite film with 20 % CCTO content based TENG device showed the best output performance of an open circuit voltage of 152 V, a short circuit current of 33.8 µA and a power density of 483 mW/m2, which were 3.37, 4.07 and 3.71 times higher than that of the pure TOCN based TENG device, respectively. In addition, effects of external force conditions, aerogel film size parameters and the agglomeration state of high filler content on the output performance were also studied. These results indicated that the TOCN/CCTO composite aerogel films can be used as efficient and low-cost cellulose-based triboelectric positive materials for energy harvesting.

Porous cellulose composite aerogel films with super piezoelectric properties for energy harvesting.

The piezoelectric effect is one of the most promising electromechanical coupling processes for mechanical energy conversion and energy harvesting. However, natural polymer based piezoelectric materials are of poor piezoelectric performance. we developed flexible porous piezoelectric aerogel films based on TEMPO-oxidized cellulose nanofibrils (TOCN) and MoS2 nanosheets. Those aerogel films possessed large specific surface areas and abundant mesopores. Moreover, they exhibited very good piezoelectric properties when a field strength of 20 MV/m was used to polarize MoS2 nanosheets and air in the mesopores. When assembled to piezoelectric nanogenerators (PENGs), a TOCN/MoS2 aerogel film PENG containing 6 wt% of MoS2 exhibited the best output performance. It generated an open circuit voltage of 42 V and a short-circuit current of 1.1 µA, a maximum area power density of 1.29 µW/cm2 and a maximum volume power density of 0.143 µW/cm3. These features enable them to be promising piezoelectric materials for energy harvesting.