Conformationally regulated "nanozyme-like" cerium oxide with multiple free radical scavenging activities for osteoimmunology modulation and vascularized osseointegration.

Given post-operative aseptic loosening in orthopedic disease treatment, osteointegration occurs at the bone-implant interface as a holistic process, including immunoregulation (e.g., macrophage polarization), angiogenesis and osteogenesis in sequence. In order to achieve early rapid and satisfactory osseointegration, different nano-shaped (nanocone, nanopolyhedron and nanoflower abbr. NC, NP & NF) cerium oxide (CeO2-x) coatings, endowed with "nanozyme-like" activities for multiple free radical elimination and osteoimmunology regulation, were hydrothermally synthesized on titanium alloy (TC4). In vitro cell experiments showed that nano-CeO2-x coated TC4 not only induced polarization of RAW264.7 cells toward M2 phenotype, but also promoted angiogenesis and vascularization of endothelial cells along with differentiation and mineralization of osteogenic precursor cells. Improvements in M2-polarized macrophage, angiogenesis, and bone regeneration were further confirmed in a rat femoral condyle model. Among the above three nano-morphologies, NF exhibited the best osseoinetegration. RNA sequencing and mechanism exploration suggested that the inhibition of PI3K-AKT signaling pathway was essential for immunomodulatory capacity of NF. In conclusion, it provided promising insights into the immunomodulatory exploitation of orthopedic implants.

Porous Titanium Scaffolds with Mechanoelectrical Conversion and Photothermal Function: A Win-Win Strategy for Bone Reconstruction of Tumor-Resected Defects.

Bone metastases severely threaten the lives of patients. Although surgical treatment combined with adjuvant chemotherapy significantly improves the survival rate of patients, tumor recurrence, or metastasis after surgical resection and bone defects caused by surgical treatment remain major challenges for clinicians. Given the abovementioned clinical requirements, barium titanate-containing iron-coated porous titanium alloy scaffolds have been proposed to promote bone defect repair and inhibit tumor recurrence. Fortunately, in vitro and in vivo experimental research confirms that barium titanate containing iron-coated porous titanium alloy scaffolds promote osteogenesis and bone reconstruction in defect repair via mechanoelectric conversion and inhibit tumor recurrence via photothermal effects. Furthermore, the underlying and intricate mechanisms of bone defect repair and tumor recurrence prevention of barium titanate-containing iron-coated porous titanium alloy scaffolds are explored. A win-win strategy for mechanoelectrical conversion and photothermal functionalization provides promising insights into bone reconstruction of tumor-resected defects.

Clinical application of 3D-printed biodegradable lumbar interbody cage (polycaprolactone/ß-tricalcium phosphate) for posterior lumbar interbody fusion.

A novel 3D-printed biodegradable cage composed of polycaprolactone (PCL) and beta-tricalcium phosphate (ß-TCP) in a mass ratio of 50:50, with stable resorption patterns and mechanical strength has been developed for lumbar interbody fusion. This is a prospective cohort study to evaluate the short- and mid-term safety and efficacy of this biodegradable cage in posterior lumbar interbody fusion (PLIF) surgery. This was a prospective single-arm pilot clinical trial in 22 patients with a follow-up time of 1, 3, 6, and 12 months, postoperatively. Clinical outcomes were assessed using the Japanese Orthopedic Association Back Pain Evaluation Questionnaire (JOABPEQ) and Visual analogue scale (VAS) for leg pain and low back pain. Radiological examination included X-ray, CT scan, and three-dimensional reconstruction to evaluate surgical indications, intervertebral space height (ISH), intervertebral bone fusion and cage degradation. A total of 22 patients was included, with an average age of 53.5 years. Among 22 patients, one patient lost to follow-up and one patient withdrew from the clinical trial because of cage retropulsion. The remaining 20 patients showed significant improvement in clinical and imaging outcomes compared to the preoperative period. The overall mean VAS for back decreased from 5.85 ± 0.99 preoperatively to 1.15 ± 0.86 at the 12-month follow-up (p < .001); the VAS for leg decreased from 5.75 ± 1.11 to 1.05 ± 0.76 (p < .001); the JOA score improved from 13.8 ± 2.64 to 26.45 ± 2.46 (p < .001). The mean intervertebral space height (ISH) increased from 11.01 ± 1.75 mm preoperatively to 12.67 ± 1.89 mm at the 12-month follow-up and the bone fusion reached 95.2% (20/21 disc segments). Partial resorption (inferior to 50% compared with the initial cage size) were found in all cages (21/21). The clinical and radiological assessments showed that the application of 3D-printed biodegradable PCL/ß-TCP cages in PLIF yielded satisfactory results at the 12-month follow-up. In the future, long-term clinical observations and controlled clinical trials are required to further validate the safety and efficacy of this novel cage.

Dynamic degradation patterns of porous polycaprolactone/ß-tricalcium phosphate composites orchestrate macrophage responses and immunoregulatory bone regeneration.

Biodegradable polycaprolactone/ß-tricalcium phosphate (PT) composites are desirable candidates for bone tissue engineering applications. A higher ß-tricalcium phosphate (TCP) ceramic content improves the mechanical, hydrophilic and osteogenic properties of PT scaffolds in vitro. Using a dynamic degradation reactor, we established a steady in vitro degradation model to investigate the changes in the physio-chemical and biological properties of PT scaffolds during degradation.PT46 and PT37 scaffolds underwent degradation more rapidly than PT scaffolds with lower TCP contents. In vivo studies revealed the rapid degradation of PT (PT46 and PT37) scaffolds disturbed macrophage responses and lead to bone healing failure. Macrophage co-culture assays and a subcutaneous implantation model indicated that the scaffold degradation process dynamically affected macrophage responses, especially polarization. RNA-Seq analysis indicated phagocytosis of the degradation products of PT37 scaffolds induces oxidative stress and inflammatory M1 polarization in macrophages. Overall, this study reveals that the dynamic patterns of biodegradation of degradable bone scaffolds highly orchestrate immune responses and thus determine the success of bone regeneration. Therefore, through evaluation of the biological effects of biomaterials during the entire process of degradation on immune responses and bone regeneration are necessary in order to develop more promising biomaterials for bone regeneration.

Magnesium surface-activated 3D printed porous PEEK scaffolds for in vivo osseointegration by promoting angiogenesis and osteogenesis.

Polyetheretherketone (PEEK) has been an alternative material for titanium in bone defect repair, but its clinical application is limited by its poor osseointegration. In this study, a porous structural design and activated surface modification were used to enhance the osseointegration capacity of PEEK materials. Porous PEEK scaffolds were manufactured via fused deposition modeling and a polydopamine (PDA) coating chelated with magnesium ions (Mg2+) was utilized on the surface. After surface modification, the hydrophilicity of PEEK scaffolds was significantly enhanced, and bioactive Mg2+ could be released. In vitro results showed that the activated surface could promote cell proliferation and adhesion and contribute to osteoblast differentiation and mineralization; the released Mg2+ promoted angiogenesis and might contribute to the formation of osteogenic H-type vessels. Furthermore, porous PEEK scaffolds were implanted in rabbit femoral condyles for in vivo evaluation of osseointegration. The results showed that the customized three-dimensional porous structure facilitated vascular ingrowth and bone ingrowth within the PEEK scaffolds. The PDA coating enhanced the interfacial osseointegration of porous PEEK scaffolds and the released Mg2+ accelerated early bone ingrowth by promoting early angiogenesis during the coating degradation process. This study provides an efficient solution for enhancing the osseointegration of PEEK materials, which has high potential for translational clinical applications.

Electrical stimulation of piezoelectric BaTiO3 coated Ti6Al4V scaffolds promotes anti-inflammatory polarization of macrophages and bone repair via MAPK/JNK inhibition and OXPHOS activation.

Bone regeneration is a highly synchronized process that requires multiple biochemical, bioelectrical, mechanical, and other physiological cues. The restoration and delivery of electrical cues locally through piezoelectric materials have been demonstrated to facilitate osteogenesis in vitro and bone repair in vivo. However, the underlying mechanism by which piezoelectric stimulation promotes osteogenesis and bone repair remains unclear yet, limiting the design and clinical application of piezoelectric materials for bone repair. Herein, a piezoelectric BaTiO3/Ti6Al4V (BT/Ti) scaffold was prepared by hydrothermal synthesis of a uniform BaTiO3 layer on three dimensionally printed Ti6Al4V scaffold. The BT/Ti scaffolds exhibited piezoelectricity and favorable biocompatibility with RAW264.7 macrophages after polarization. In vitro results demonstrated that the piezoelectric effects of the poled BT/Ti scaffolds promoted M2 polarization of macrophages and immunoregulatory osteogenesis of MC-3T3 osteoblasts. In a subcutaneous implantation model, a higher proportion of CD68+ CD206+ M2 macrophages was observed in the tissues around the poled BT/Ti scaffolds under low intensity pulsed ultrasound (LIPUS) stimulation. Improvements in macrophage M2 polarization and bone regeneration were further identified in a sheep cervical corpectomy model. RNA sequencing and mechanistic investigation revealed that the piezoelectric BT/Ti (poled) scaffolds inhibited the inflammatory MAPK/JNK signaling cascade and activated oxidative phosphorylation (OXPHOS) and ATP synthesis in macrophages. Collectively, our study provides a promising method for regulating the immune microenvironment and enhancing bone regeneration using polarized piezoelectric BT/Ti scaffolds.