Nonlinear 3D Ligand-Based Metal-Organic Framework for Thermodynamic-Kinetic Synergistic Splitting of Mono-/Dibranched Hexane Isomers.

The selective splitting of hexane isomers without the use of energy-intensive phase-change processes is essential for the low-carbon production of clean fuels and also very challenging. Here, we demonstrate a strategy to achieve a complete splitting of the high-RON dibranched isomer from the monobranched and linear isomers, by using a nonlinear 3D ligand to form pillar-layered MOFs with delicate pore architecture and chemistry. Compared with its isoreticular MOFs with the same ted pillar but different linear 3D or linear 2D in-layer ligands, the new MOF constructed in this work, Cu(bhdc)(ted)0.5 (ZUL-C5), exhibited an interesting "channel switch" effect which creates pore space with reduced window size and channel dimensionality together with unevenly distributed alkyl-rich adsorption sites, contributing to a greatly enhanced ability to discriminate between mono- and dibranched isomers. Evidenced by a series of studies including adsorption equilibrium/kinetics/breakthrough tests, guest-loaded single-crystal/powder XRD measurement, and DFT-D modeling, a thermodynamic-kinetic synergistic mechanism in the separation was proposed, resulting in a record production time for high-purity 2,2-dimethylbutane along with a high yield.

Optimizing Trace Acetylene Removal from Acetylene/Ethylene Mixture in a Flexible Metal-Organic Framework by Crystal Downsizing.

Improving the gas separation performance of metal-organic frameworks (MOFs) by crystal downsizing is an important but often overlooked issue. Here, we report three different-sized flexible ZUL-520 MOFs (according to the crystal size from large to small, the three samples are, respectively, named ZUL-520-0, ZUL-520-1, and ZUL-520-2) with the same chemical structure for optimizing trace acetylene (C2H2) removal from acetylene/ethylene (C2H2/C2H4) mixture. The three differently sized activated ZUL-520 (denoted as ZUL-520a) exhibited almost identical C2H2 uptake of 4.8 mmol/g at 100 kPa, while the C2H2 uptake at 1 kPa increased with a downsizing crystal. The C2H2 uptake of activated ZUL-520-2 (denoted as ZUL-520-2a) at 1 kPa was ∼55% higher than that of activated ZUL-520-0 (denoted as ZUL-520-0a). The adsorption isotherms and adsorption kinetics validated that gas adsorptive separation is governed not only by adsorption thermodynamics but also by adsorption kinetics. In addition, all three different-sized ZUL-520a MOFs showed high C2H2/C2H4 selectivity. Grand canonical Monte Carlo (GCMC) simulations and dispersion-corrected density functional theory (DFT-D) computations illustrated a plausible mechanism of C2H2 adsorption in MOFs. Importantly, breakthrough experiments demonstrated that ZUL-520a can effectively separate the C2H2/C2H4 (1/99, v/v) mixture and the C2H4 productivity obtained by ZUL-520-2a was much higher than that by ZUL-520-0a. Our work may provide an easy but powerful strategy for upgrading the performance of gas adsorptive separation in MOFs.

Complete separation of benzene-cyclohexene-cyclohexane mixtures via temperature-dependent molecular sieving by a flexible chain-like coordination polymer.

The separation and purification of C6 cyclic hydrocarbons (benzene, cyclohexene, cyclohexane) represent a critically important but energy intensive process. Developing adsorptive separation technique to replace thermally driven distillation processes holds great promise to significantly reduce energy consumption. Here we report a flexible one-dimensional coordination polymer as an efficient adsorbent to discriminate ternary C6 cyclic hydrocarbons via an ideal molecular sieving mechanism. The compound undergoes fully reversible structural transformation associated with removal/re-coordination of water molecules and between activated and hydrocarbon-loaded forms. It exhibits distinct temperature- and adsorbate-dependent adsorption behavior which facilitates the complete separation of benzene, cyclohexene and cyclohexane from their binary and ternary mixtures, with the record-high uptake ratios for C6H6/C6H12 and C6H10/C6H12 in vapor phase and highest binary and ternary selectivities in liquid phase. In situ infrared spectroscopic analysis and ab initio calculations provide insight into the host-guest interactions and their effect on the preferential adsorption and structural transformation.

Leveraging Diffusion Kinetics to Reverse Propane/Propylene Adsorption in Zeolitic Imidazolate Framework-8.

The separation challenge posed by propylene/propane mixtures arises from their nearly identical molecular sizes and physicochemical properties. Metal-organic frameworks (MOFs) have demonstrated potential in addressing this challenge through the precision tailoring of pore sizes and surface chemistry. However, introducing modifications at the molecular level remains a considerable hurdle. This work presents an approach to reversibly tune the propylene/propane adsorption preference in zeolitic imidazolate framework-8 (ZIF-8) by manipulating the particle size and gas flow rate. Systematically increasing the ZIF-8 crystals from 9 to 224 µm restricts propane diffusion, thereby reversing its preferential adsorption over propylene. Furthermore, raising the gas flow rate of mixed propylene/propane shifts the rate-determining breakthrough step from thermodynamic equilibrium to kinetics, again reversing the adsorption preference in a particular ZIF-8 sample. We propose "dynamic selectivity (Sd(t))" as a concept that incorporates both thermodynamic and kinetic factors to elucidate these unexpected findings. Moreover, the driving force equation, grounded on the concept of Sd(t), has improved the precision and stability of the computational simulation for fixed-bed adsorption processes. This work underscores the potential of diffusion-based modulation, implemented through manageable external changes, as a viable strategy to optimize separation performance in porous adsorbent materials.

Temperature-dependent molecular sieving of fluorinated propane/propylene mixtures by a flexible-robust metal-organic framework.

The electronics industry necessitates highly selective adsorption separation of hexafluoropropylene (C3F6) from perfluoropropane (C3F8), which poses a challenge due to their similar physiochemical properties. In this work, we present a microporous flexible-robust metal-organic framework (Ca-tcpb) with thermoregulatory gate opening, a rare phenomenon that allows tunable sieving of C3F8/C3F6. Remarkably, the temperature-dependent adsorption behavior enhances the discrimination between the larger C3F8 and the smaller C3F6, resulting in unprecedented C3F6/C3F8 selectivity (over 10,000) compared to other well-known porous materials at an optimal temperature (298 K). Dynamic breakthrough experiments demonstrate that high-purity C3F8 (over 99.999%) could be obtained from a C3F6/C3F8 (10:90) mixture under ambient conditions. The unique attributes of this material encompass exceptional adsorption selectivity, remarkable structural stability, and outstanding separation performance, positioning it as a highly promising candidate for C3F6/C3F8 separation. Single-crystal structural analysis of C3F6-loaded Ca-tcpb and theoretical calculations elucidate the host-guest interaction via multiple intermolecular interactions.

Quasi-Discrete Pore Engineering via Ligand Racemization in Metal-Organic Frameworks for Thermodynamic-Kinetic Synergistic Separation of Propylene and Propane.

The adsorptive separation of propylene and propane offers an energy-efficient alternative to the conventional cryogenic distillation technology. However, developing porous adsorbents with both high equilibrium and kinetic selectivity remains extremely challenging due to the similar size and physical properties of these gases. Herein, this work reports a ligand racemization strategy to construct quasi-discrete pores in MOFs for a synergistically enhanced thermodynamic and kinetic separation performance. The use of enantiopure l-malic acid versus racemic dl-malic acid as ligands afforded isoreticular Ni-based MOFs with contrasting one-dimensional channels (l-mal-MOF) and quasi-discrete cavities connected by small windows (dl-mal-MOF). The periodic pore constrictions in dl-mal-MOF significantly increased the differentiation in diffusion rates and binding energies between propylene and propane. dl-mal-MOF exhibited an exceptional propylene uptake of 1.82 mmol/g at 0.05 bar and 298 K along with an ultrahigh equilibrium-kinetic combined selectivity of 62.6. DFT calculations and MD simulations provided insights into the synergistic mechanism of preferential propylene adsorption and diffusion. Breakthrough column experiments demonstrated the excellent separation and high-purity recovery of propylene over propane on dl-mal-MOF. The robust stability and facile regeneration highlight its potential for propylene purification applications.

Spatial Distribution of Nitrogen Binding Sites in Metal-Organic Frameworks for Selective Ethane Adsorption and One-Step Ethylene Purification.

The one-step purification of ethylene (C2 H4 ) from mixtures containing ethane (C2 H6 ) and acetylene (C2 H2 ) is an industrially important yet challenging process. In this work, we present a site-engineering strategy aimed at manipulating the spatial distribution of binding sites within a confined pore space. We realized successfully by incorporating nitrogen-containing heterocycles, such as indole-5-carboxylic acid (Ind), benzimidazole-5-carboxylic acid (Bzz), and indazole-5-carboxylic acid (Izo), into the robust MOF-808 platform via post-synthetic modification. The resulting functionalized materials, namely MOF-808-Ind, MOF-808-Bzz, and MOF-808-Izo, demonstrated significantly improved selectivity for C2 H2 and C2 H6 over C2 H4 . MOF-808-Bzz with two uniformly distributed nitrogen binding sites gave the optimal geometry for selective ethane trapping through multiple strong C-H⋅⋅⋅N hydrogen bonds, leading to the highest C2 H2 /C2 H4 and C2 H6 /C2 H4 combined selectivities among known MOFs. Column breakthrough experiments validated its ability to purify C2 H4 from ternary C2 H2 /C2 H4 /C2 H6 mixtures in a single step.

Interlayer Symmetry Control in Flexible-Robust Layered Metal-Organic Frameworks for Highly Efficient C2H2/CO2 Separation.

Removal of the CO2 impurities from C2H2/CO2 mixtures is an essential process to produce high-purity C2H2. Fabricating an adsorbent capable of discriminating these species, which have close kinetic diameters, is critical for developing advanced adsorption processes. Herein, we demonstrate a strategy to exploit the tunability of interlayer and intralayer spaces of two-dimensional (2D) layered metal-organic frameworks to achieve high performance for C2H2/CO2 separation. This indicates that interlayer symmetrical control can achieve more efficient packing of C2H2 into Ni(4-DPDS)2CrO4, with a high C2H2 capacity of 45.7 cm3·g-1 at 0.01 bar and a selectivity of 67.7 (298 K, 1 bar), which strikes a good balance between working capacity and separation selectivity compared to other isostructural Ni(4-DPDS)2MO4 (M = Mo, W). Crystallographic studies and DFT-D calculations reveal that such a C2H2-selective adsorbent possesses strong binding interactions due to the tailored pore confinement provided by the angular anions and rich electronic environment. Experimental breakthrough results comprehensively demonstrate the efficient C2H2/CO2 separation performance of this unique material.

Supramolecular Assembly of One-Dimensional Coordination Polymers for Efficient Separation of Xenon and Krypton.

Efficient separation and purification of xenon (Xe) from krypton (Kr) represent an industrially crucial but challenging process. While the adsorption-based separation of these atomic gases represents an energy-efficient process, achieving highly selective adsorbents remains a difficult task. Here, we demonstrate a supramolecular assembly of coordination polymers, termed as M(II)-dhbq (M = Mg, Mn, Co, and Zn; dhbq = 2,5-dihydroxy-1,4-benzoquinone), with high-density open metal sites (5.3 nm-3) and optimal pore size (5.5 Å), which are able to selectively capture Xe among other chemically inert gases including Kr, Ar, N2, and O2. Among M(II)-dhbq materials, Mn-dhbq exhibits the highest Xe uptake capacity of 3.1 mmol/g and a Xe/Kr selectivity of 11.2 at 298 K and 1.0 bar, outperforming many state-of-the-art adsorbents reported so far. Remarkably, the adsorption selectivity of Mn-dhbq for Xe/O2, Xe/N2, and Xe/Ar at ambient conditions reaches as high as 70.0, 139.3, and 64.0, respectively. Direct breakthrough experiments further confirm that all M(II)-dhbq materials can efficiently discriminate Xe atoms from other inert gases. It is revealed from the density functional theory calculations that the strong affinity between Xe and the coordination polymer is mainly attributed to the polarization by open metal sites.

Blending Aryl Ketone in Covalent Organic Frameworks to Promote Photoinduced Electron Transfer.

Aryl-ketone derivatives have been acknowledged as promising organic photocatalysts for photosynthesis. However, they are limited by their photostability and have been less explored for photoinduced electron transfer (PET) applications. Herein we demonstrate a novel strategy to cover the shortage of aryl-ketone photocatalysts and control the photoreactivity by implanting symmetric aryl ketones into the conjugated covalent organic frameworks (COFs). To prove the concept, three comparative materials with the same topology and varied electronic structures were built, adopting truxenone knot and functionalized terephthalaldehyde linkers. Spectroscopic investigation and excited carrier dynamics analysis disclosed improvements in the photostability and electronic transfer efficiency as well as the structure-performance relationships toward N-aryl tetrahydroisoquinoline oxidation. This system provides a robust rule of thumb for designing new-generation aryl-ketone photocatalysts.

Vertex Strategy in Layered 2D MOFs: Simultaneous Improvement of Thermodynamics and Kinetics for Record C2H2/CO2 Separation Performance.

Developing adsorbents with multiple merits in capacity, selectivity, mass transfer, and stability toward C2H2/CO2 separation is crucial and challenging for producing high-purity C2H2 for advanced polymers and the electronic industry. Here, we demonstrate a vertex strategy to create adsorbents combining these merits through rationally designing the vertex groups of a wavy-shaped framework in layered 2D metal-organic frameworks (MOFs) to finely regulate the local conformation and stacking interactions, which creates the optimal inter- and intralayer space to realize simultaneous improvement of adsorption thermodynamics and kinetics. Two new hydrolytically stable MOFs, ZUL-330 and ZUL-430, were prepared, and diverse experiments and modeling on both adsorption equilibrium and diffusion were performed. Record separation selectivities coupled with extraordinary dynamic C2H2 capacities were achieved for C2H2/CO2 mixtures with different proportions (50/50 or 10/5, v/v), along with a small diffusion barrier and fast mass transfer. Consequently, polymer-grade (99.9%) and electronic-grade (99.99%) C2H2 were obtained with excellent productivities of up to ∼6 mmol cm-3.

Sequential Separation of Linear, Mono-, and Di-Branched Hexane Isomers on a Robust Coordination Polymer with Nonbonding Flexibility.

Efficient separation of hexane isomers is a crucial process for upgrading gasoline. Herein, the sequential separation of linear, mono-, and di-branched hexane isomers by a robust stacked 1D coordination polymer termed as Mn-dhbq ([Mn(dhbq)(H2 O)2 ], H2 dhbq = 2,5-dihydroxy-1,4-benzoquinone) is reported. The interchain space of the activated polymer is of optimal aperture size (5.58 Å) that could exclude 2,3-dimethylbutane, while the chain structure can discriminate n-hexane with high capacity (1.53 mmol g-1 at 393 K, 6.67 kPa) by high-density open metal sites (5.18 mmol g-1 ). With the temperature- and adsorbate-dependent swelling of interchain spaces, the affinity between 3-methylpentane and Mn-dhbq can be deliberately controlled from sorption to exclusion, and thus a complete separation of ternary mixture can be achieved. Column breakthrough experiments confirm the excellent separation performance of Mn-dhbq. The ultrahigh stability and easy scalability further highlight the application prospect of Mn-dhbq for separation of hexane isomers.

Customizing Metal-Organic Frameworks by Lego-Brick Strategy for One-Step Purification of Ethylene from a Quaternary Gas Mixture.

One-step purification of ethylene (C2 H4 ) from a quaternary gas mixture of C2 H6 /C2 H4 /C2 H2 /CO2 by adsorption is a promising separation process, yet developing adsorbents that synergistically capture various gas impurities remains challenging. Herein, a Lego-brick strategy is proposed to customize pore chemistry in a unified framework material. The ethane-selective MOF platform is further modified with customized binding sites to specifically adsorb acetylene and carbon dioxide, thus one-step purification of C2 H4 with high productivity of polymer-grade product (134 mol kg-1 ) is achieved on the assembly of porous coordination polymer-2,5-furandicarboxylic acid (PCP-FDCA) and PCP-5-aminoisophthalic acid (IPA-NH2 ). Computational studies verify that the low-polarity surface of this MOFs-based platform provides a delicate environment for C2 H6 recognition, and the specific binding sites (FDCA and IPA-NH2 ) exhibit favorable trapping of C2 H2 and CO2 via CHδ+ ···Oδ- and Cδ+ ···Nδ- electrostatic interactions, respectively. The proposed Lego-brick strategy to customize binding sites within the MOFs structure provides new ideas for the design of adsorbents for compounded separation tasks.

Combination of Low-Polar and Polar Binding Sites in Aliphatic MOFs for the Efficient C2H6/C2H4 Separation.

The selective capture of C2H6 from C2H6/C2H4 mixtures is of critical importance to realize the efficient one-step purification of C2H4 but remains challenging due to their similar properties and smaller quadrupole moment of C2H6 that usually result in C2H4-preferring adsorption. Herein, we reported two isostructural pillared-layer metal-organic frameworks, ZUL-C3 and ZUL-C4, which were constructed by mixed polycycloalkane-type ligands. Their low-polar pore environment along with more accessible low-polar C-H binding sites on the pore surface are conducive to generate more van der Waals interactions with C2H6 while the carboxylic groups distributed at four corners of pores form stronger and more dipolar interactions with C2H6, cooperatively resulting in a good C2H6/C2H4 uptake ratio of 1.50 for ZUL-C3 and 1.72 for ZUL-C4 in static adsorption experiments and a high C2H4 (>99.99% purity) productivity of 10.1 L/kg for ZUL-C3 and 14.6 L/kg for ZUL-C4 from an equimolar C2H6/C2H4 mixture in breakthrough experiments.

Visible-Light-Induced Phenoxyl Radical-based Metal-Organic Framework for Selective Photooxidation of Sulfides.

Phenoxyl radicals originating from phenols through oxidation or photoinduction are relatively stable and exhibit mild oxidative activity, which endows them with the potential for photocatalysis. Herein, a stable and recyclable metal-organic framework Zr-MOF-OH constructed of a binaphthol derivative ligand has been synthesized and functions as an efficient heterogeneous photocatalyst. Zr-MOF-OH shows fairly good catalytic activity and substrate compatibility toward the selective oxidation of sulfides to sulfoxides under visible light irradiation. Such irradiation of Zr-MOF-OH converts the phenolic hydroxyl groups of the binaphthol derivative ligand to phenoxyl radicals through excited state intramolecular proton transfer, and the excited state photocatalyst triggers the single-electron oxidation of the sulfide. No reactive oxygen species are produced in the photocatalytic process, and triplet O2 directly participates in the reaction, endowing Zr-MOF-OH with wide substrate compatibility and high selectivity, which also proposes a promising pathway for the direct activation of substrates via phenoxyl radicals.

Strengthening Intraframework Interaction within Flexible MOFs Demonstrates Simultaneous Sieving Acetylene from Ethylene and Carbon Dioxide.

Efficient separation of acetylene (C2 H2 )/ethylene (C2 H4 ) and acetylene/carbon dioxide (CO2 ) by adsorption is an industrially promising process, but adsorbents capable of simultaneously capturing trace acetylene from ethylene and carbon dioxide are scarce. Herein, a gate-opening effect on three isomorphous flexible metal-organic frameworks (MOFs) named Co(4-DPDS)2 MO4 (M = Cr, Mo, W; 4-DPDS = 4,4-dipyridyldisulfide) is modulated by anion pillars substitution. The shortest CrO4 2- strengthens intraframework hydrogen bonding and thus blocks structural transformation after activation, striking a good balance among working capacity, separation selectivity, and trace impurity removal of flexible MOFs out of nearly C2 H2 /C2 H4 and C2 H2 /CO2 molecular sieving. The exceptional separation performance of Co(4-DPDS)2 CrO4 is confirmed by dynamic breakthrough experiments. It reveals the specific threshold pressures control in anion-pillared flexible materials enabled elimination of the impurity leakage to realize high purity products through precise control of the intraframework interaction. The adsorption mechanism and multimode structural transformation property are revealed by both calculations and crystallography studies. This work demonstrates the feasibility of modulating flexibility for controlling gate-opening effect, especially for some cases of significant aperture shrinkage after activation.

Hybrid Hydrogen-Bonded Organic Frameworks: Structures and Functional Applications.

As a new class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs) assembled from building blocks by hydrogen bonds have gained increasing attention. HOFs benefit from advantages including mild synthesis, easy purification, and good recyclability. However, some HOFs transform into unstable frameworks after desolvation, which hinders their further applications. Nowadays, the main challenges of developing HOFs lie in stability improvement, porosity establishment, and functionalization. Recently, more and more stable and permanently porous HOFs have been reported. Of all these design strategies, stronger charge-assisted hydrogen bonds and coordination bonds have been proven to be effective for developing stable, porous, and functional solids called hybrid HOFs, including ionic and metallized HOFs. This Review discusses the rational design synthesis principles of hybrid HOFs and their cutting-edge applications in selective inclusion, proton conduction, gas separation, catalysis and so forth.

Zr-Based Metal-Organic Frameworks with Phosphoric Acids for the Photo-Oxidation of Sulfides.

Heterogeneous Brønsted acidic catalysts such as phosphoric acids are the conventional activators for organic transformations. However, the photocatalytic performance of these catalysts is still rarely explored. Herein, a novel Zr-based metal-organic framework Zr-MOF-P with phosphoric acids as a heterogeneous photocatalyst has been fabricated, which shows high selectivity and reactivity towards the photo-oxidation of sulfides under white light illumination. A mechanism study indicates that the selective oxygenation of sulfides occurs with triplet oxygen rather than common reactive oxygen species (ROS). When Zr-MOF-P is irradiated, the hydroxyl group of phosphoric acid is converted into oxygen radical, which takes an electron from the sulfides, and then the activated substrates react with the triplet oxygen to form sulfoxides, avoiding the destruction of the catalysts and endowing the reaction with high substrate compatibility and fine recyclability.

Highly Efficient Separation of C8 Aromatic Isomers by Rationally Designed Nonaromatic Metal-Organic Frameworks.

The separation of C8 aromatics (xylenes and ethylbenzene) remains one of the most challenging industrial separations due to their similar structures and properties. Suitable adsorbents that can distinguish the small differences among isomers are urgently demanded. Herein, we demonstrate a strategy to realize the precise discrimination of C8 aromatics by constructing a nonaromatic confined pore environment with mixed polycycloalkane-type ligands. The nonaromatic low-polar pore environment avoids strong convergent interactions between the framework and the common phenyl rings while creating possibilities to amplify the difference between host-guest/guest-guest interactions regarding the different methyl (ethyl) group positions of isomers. The resultant metal-organic framework, ZUL-C3, with either tetragonal or monoclinic lattice, exhibits outstanding separation performance for C8 aromatics, not only realizing the simultaneous separation of four isomers from each other but also setting a benchmark for the dynamic separation performance of OX/PX and OX/MX.

Coking-Resistant Polyethylene Upcycling Modulated by Zeolite Micropore Diffusion.

Although the mass production of synthetic plastics has transformed human lives, it has resulted in waste accumulation on the earth. Here, we report a low-temperature conversion of polyethylene into olefins. By mixing the polyethylene feed with rationally designed ZSM-5 zeolite nanosheets at 280 °C in flowing hydrogen as a carrier gas, light hydrocarbons (C1-C7) were produced with a yield of up to 74.6%, where 83.9% of these products were C3-C6 olefins with almost undetectable coke formation. The reaction proceeds in multiple steps, including polyethylene melting, flowing to access the zeolite surface, cracking on the zeolite surface, formation of intermediates to diffuse into the zeolite micropores, and cracking into small molecules in the zeolite micropores. The ZSM-5 zeolite nanosheets kinetically matched the cascade cracking steps on the zeolite external surface and within micropores by boosting the intermediate diffusion. This feature efficiently suppressed the intermediate accumulation on the zeolite surface to minimize coke formation. In addition, we found that hydrogen participation in the cracking process could hinder the formation of polycyclic species within zeolite micropores, which also contributes to the rapid molecule diffusion. The coking-resistant polyethylene upcycling process at a low temperature not only overturns the general viewpoint for facile coke formation in the catalytic cracking over the zeolites but also demonstrates how the polyethylene-based plastics can be upcycled to valuable chemicals. In addition to the model polyethylene, the reaction system worked efficiently for the depolymerization of multiple practically used polyethylene-rich plastics, enabling an industrially and economically viable path for dealing with plastic wastes.