Antimicrobial activity of ZnO-Ag-MWCNTs nanocomposites prepared by a simple impregnation-calcination method.

Zinc oxide (ZnO) nanorods and ZnO nanostructures composited with silver (Ag) and multi-walled carbon nanotubes (MWCNTs) have been synthesized by a simple impregnation-calcination method and have been shown to be suitable for use as antimicrobial agents. The preparation method used for composite materials is very simple, time-effective, and can be used for large-scale production. Several analytical techniques, including X-ray diffraction (XRD), scanning electron spectroscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and Fourier transmission infrared spectroscopy (FTIR), have been used to characterize the prepared ZnO-Ag-MWCNT composite materials. The effects on structural, morphological, and antimicrobial properties of (ZnO)100-x (Ag)x nanocomposites at various weight ratios (x = 0, 5, 10, 30, and 50 wt%) have been investigated. The antimicrobial properties of ZnO composited with Ag nanoparticles and MWCNTs towards both gram-positive and gram-negative bacteria species were studied. The effect of raw MWCNTs and MWCNTs composited with ZnO and Ag on the cell morphology and chemical composition of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was studied by SEM and EDS, respectively. It was found that composite materials made of ZnO-Ag-MWCNTs exhibit greater antibacterial activities toward the microorganisms E. coli and S. aureus than ZnO-Ag, which could be beneficial for efficient antimicrobial agents in water and air treatment applications.

Microstructure and Superconducting Properties of Bi-2223 Synthesized via Co-Precipitation Method: Effects of Graphene Nanoparticle Addition.

The effects of graphene addition on the phase formation and superconducting properties of (Bi1.6Pb0.4)Sr2Ca2Cu3O10 (Bi-2223) ceramics synthesized using the co-precipitation method were systematically investigated. Series samples of Bi-2223 were added with different weight percentages (x = 0.0, 0.3, 0.5 and 1.0 wt.%) of graphene nanoparticles. The samples' phase formations and crystal structures were characterized via X-ray diffraction (XRD), while the superconducting critical temperatures, Tc, were investigated using alternating current susceptibility (ACS). The XRD showed that a high-Tc phase, Bi-2223, and a small low-Tc phase, Bi-2212, dominated the samples. The volume fraction of the Bi-2223 phase increased for the sample with x = 0.3 wt.% and 0.5 wt.% of graphene and slightly reduced at x = 1.0 wt.%. The ACS showed that the onset critical temperature, Tc-onset, phase lock-in temperature, Tcj, and coupling peak temperature, TP, decreased when graphene was added to the samples. The susceptibility-temperature (χ'-T) and (χ″-T) curves of each sample, where χ' and χ″ are the real and imaginary parts of the susceptibility, respectively, were obtained. The critical temperature of the pure sample was also measured.

Superconducting Properties of YBa2Cu3O7-δ with a Multiferroic Addition Synthesized by a Capping Agent-Aided Thermal Treatment Method.

A bulk YBa2Cu3O7-δ (Y-123) superconductor synthesized by a thermal treatment method was added with different weight percentages (x = 0.0, 0.2, 1.0, 1.5, and 2.0 wt.%) of BiFeO3 (BFO) nanoparticle. X-ray diffraction (XRD), alternating current susceptibility (ACS), and field emission scanning electron microscopy (FESEM) were used to determine the properties of the samples. From the XRD results, all samples showed an orthorhombic crystal structure with a Pmmm space group. The sample x = 1.0 wt.% gave the highest value of Y-123. The high amounts of BFO degraded the crystallite size of the sample, showing that the addition did not promote the grain growth of Y-123. From ACS results, the Tc-onset value was shown to be enhanced by the addition of the BFO nanoparticle, where x = 1.5 wt.% gave the highest Tc value (91.91 K). The sample with 1.5 wt.% showed a high value of Tp (89.15 K). The FESEM analysis showed that the average grain size of the samples decreased as BFO was introduced. However, the small grain size was expected to fill in the boundary, which would help in enhancing the grain connectivity. Overall, the addition of the BFO nanoparticles in Y-123 helped to improve the superconducting properties, mainly for x = 1.5 wt.%.

Influence of Irradiation Time on the Structural and Optical Characteristics of CuSe Nanoparticles Synthesized via Microwave-Assisted Technique.

A rapid, sustainable, and ecologically sound approach is urgently needed for the production of semiconductor nanomaterials. CuSe nanoparticles (NPs) were synthesized via a microwave-assisted technique using CuCl2·2H2O and Na2SeO3 as the starting materials. The role of the irradiation time was considered as the primary concern to regulate the size and possibly the shape of the synthesized nanoparticles. A range of characterization techniques was used to elucidate the structural and optical properties of the fabricated nanoparticles, which included X-ray diffraction, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy, field emission scanning electron microscopy, Raman spectroscopy (Raman), UV-Visible diffuse reflectance spectroscopy (DRS), and photoluminescence spectroscopy (PL). The mean crystallite size of the CuSe hexagonal (Klockmannite) crystal structure increased from 21.35 to 99.85 nm with the increase in irradiation time. At the same time, the microstrain and dislocation density decreased from 7.90 × 10-4 to 1.560 × 10-4 and 4.68 × 10-2 to 1.00 × 10-2 nm-2, respectively. Three Raman vibrational bands attributed to CuSe NPs have been identified in the Raman spectrum. Irradiation time was also seen to play a critical role in the NP optical band gap during the synthesis. The decrease in the optical band gap from 1.85 to 1.60 eV is attributed to the increase in the crystallite size when the irradiation time was increased. At 400 nm excitation wavelength, a strong orange emission centered at 610 nm was observed from the PL measurement. The PL intensity is found to increase with an increase in irradiation time, which is attributed to the improvement in crystallinity at higher irradiation time. Therefore, the results obtained in this study could be of great benefit in the field of photonics, solar cells, and optoelectronic applications.

Structural and Superconducting Properties of Thermal Treatment-Synthesised Bulk YBa2Cu3O7-δ Superconductor: Effect of Addition of SnO2 Nanoparticles.

YBa2Cu3O7-δ (Y-123) bulk superconductors with the addition of (0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 wt.%) SnO2 nanoparticles were synthesised via a thermal treatment method. The influence of SnO2 addition on the superconducting properties by means of critical temperature, Tc, AC susceptibility, phase formation and microstructures, including its elemental composition analysis, were studied. Sharp superconducting transition, ∆Tc, and diamagnetic transition were obtained for all SnO2-added samples. It was observed that sample x = 0.4 with a Y-123 phase percentage of 95.8% gives the highest Tc, smallest ∆Tc, and the sharpest diamagnetic transition in the normalised susceptibility curves. The microstructure also showed an excess of Sn precipitates on the sample's surface at x = 0.8 and above. As such, the best superconducting properties were observed at x = 0.4 SnO2 addition inside the Y-123 host sample.