Nanoneedles of Mixed Transition Metal Phosphides as Bifunctional Catalysts for Electrocatalytic Water Splitting in Alkaline Media.

In this work, mixed Ni/Co and Ni/Fe metal phosphides with different metal ratios were synthesized through the phosphidization of high-surface-area hydroxides grown hydrothermally on carbon cloth. The materials were characterized by means of X-ray photoemission spectroscopy, X-ray diffraction, energy dispersive X-ray analysis, and electron microscopies. The electrocatalytic performance in the electrochemical water splitting was tested in alkaline media. With the aim of determining the chemical stability of the mixed phosphides and the possible changes undergone under catalytic conditions, the materials were characterized before and after the electrochemical tests. The best performances in the hydrogen evolution reaction were achieved when synergic interactions are established among the metal centers, as suggested by the outstanding performances (50 mV to achieve 10 mA/cm2) of materials containing the highest amount of ternary compounds, i.e., NiCoP and NiFeP. The best performances in the oxygen evolution reaction were reached by the Ni-Fe materials. Under these conditions, it was demonstrated that a strong oxidation of the surface and the dissolution of the phosphide/phosphate component takes place, with the consequent formation of the corresponding metal oxides and hydroxides.

NiSe and CoSe Topological Nodal-Line Semimetals: A Sustainable Platform for Efficient Thermoplasmonics and Solar-Driven Photothermal Membrane Distillation.

The control of heat at the nanoscale via the excitation of localized surface plasmons in nanoparticles (NPs) irradiated with light holds great potential in several fields (cancer therapy, catalysis, desalination). To date, most thermoplasmonic applications are based on Ag and Au NPs, whose cost of raw materials inevitably limits the scalability for industrial applications requiring large amounts of photothermal NPs, as in the case of desalination plants. On the other hand, alternative nanomaterials proposed so far exhibit severe restrictions associated with the insufficient photothermal efficacy in the visible, the poor chemical stability, and the challenging scalability. Here, it is demonstrated the outstanding potential of NiSe and CoSe topological nodal-line semimetals for thermoplasmonics. The anisotropic dielectric properties of NiSe and CoSe activate additional plasmonic resonances. Specifically, NiSe and CoSe NPs support multiple localized surface plasmons in the optical range, resulting in a broadband matching with sunlight radiation spectrum. Finally, it is validated the proposed NiSe and CoSe-based thermoplasmonic platform by implementing solar-driven membrane distillation by adopting NiSe and CoSe nanofillers embedded in a polymeric membrane for seawater desalination. Remarkably, replacing Ag with NiSe and CoSe for solar membrane distillation increases the transmembrane flux by 330% and 690%, respectively. Correspondingly, costs of raw materials are also reduced by 24 and 11 times, respectively. The results pave the way for the advent of NiSe and CoSe for efficient and sustainable thermoplasmonics and related applications exploiting sunlight within the paradigm of the circular blue economy.

W Doping in Ni12P5 as a Platform to Enhance Overall Electrochemical Water Splitting.

Bifunctional electrocatalysts for efficient hydrogen generation from water splitting must overcome both the sluggish water dissociation step of the alkaline hydrogen evolution half-reaction (HER) and the kinetic barrier of the anodic oxygen evolution half-reaction (OER). Nickel phosphides are a promising catalysts family and are known to develop a thin active layer of oxidized Ni in an alkaline medium. Here, Ni12P5 was recognized as a suitable platform for the electrochemical production of γ-NiOOH─a particularly active phase─because of its matching crystallographic structure. The incorporation of tungsten by doping produces additional surface roughness, increases the electrochemical surface area (ESCA), and reduces the energy barrier for electron-coupled water dissociation (the Volmer step for the formation of Hads). When serving as both the anode and cathode, the 15% W-Ni12P5 catalyst provides an overall water splitting current density of 10 mA cm-2 at a cell voltage of only 1.73 V with good durability, making it a promising bifunctional catalyst for practical water electrolysis.

Structural Transformation of SnS2 to SnS by Mo Doping Produces Electro/Photocatalyst for Hydrogen Production.

SnS and SnS2 are layered semiconductors, with potential promising properties for electro- and photocatalytic hydrogen (H2 ) production. The vast knowledge in preparation and modification of layered structures was still not employed successfully in this system to fully maximize its potential. Here, the first report of structural transformation of SnS2 into SnS with Mo-doping as a bifunctional catalyst for the hydrogen evolution reaction (HER) is reported. The structural phase transition optimized the properties of the material, providing a more delicate morphology with additional catalytic sites. The electrochemical studies showed overpotential of 377 mV at 10 mA cm-2 for HER with Tafel slopes of 100 mV dec-1 in 0.5 m H2 SO4 for 10 % Mo-SnS. The same structure acts as an efficient photocatalyst in the generation of H2 from water under visible illumination with rate of 0.136 mmol g-1 h-1 of H2 , which is 20 times higher than pristine SnS2 under visible light.

One-pot synthesis of MoS2(1-x)Se2x on N-doped reduced graphene oxide: tailoring chemical and structural properties for photoenhanced hydrogen evolution reaction.

In this work we designed a one-pot solvothermal synthesis of MoS2(1-x)Se2x nanosheets directly grown on N-doped reduced graphene oxide (hereafter N-rGO). We optimized the synthesis conditions to control the Se : S ratio, with the aim of tailoring the optoelectronic properties of the resulting nanocomposites for their use as electro- and photoelectro-catalysts in the hydrogen evolution reaction (HER). The synthesis protocol made use of ammonium tetrathiomolybdate (ATM) as MoS2 precursor and dimethyl diselenide (DMDSe) as selenizing agent. By optimizing growth conditions and post-annealing treatments, we produced either partially amorphous or highly crystalline chalcogen-defective electrocatalysts. All samples were tested for the HER in acidic environment, and the best performing among them, for the photoassisted HER. In low crystallinity samples, the introduction of Se is not beneficial for promoting the catalytic activity, and MoS2/N-rGO was the most active electrocatalyst. On the other hand, after the post-annealing treatment and the consequent crystallization of the materials, the best HER performance was obtained for the sample with x = 0.38, which also showed the highest enhancement upon light irradiation.

Manganese Doping of MoSe2 Promotes Active Defect Sites for Hydrogen Evolution.

Transition-metal dichalcogenides (TMDs) are being widely pursued as inexpensive, earth-abundant substitutes for precious-metal catalysts in technologically important reactions such as electrochemical hydrogen evolution reaction (HER). However, the relatively high onset potentials of TMDs relative to Pt remain a persistent challenge in widespread adoption of these materials. Here, we demonstrate a one-pot synthesis approach for substitutional Mn-doping of MoSe2 nanoflowers to achieve appreciable reduction in the overpotential for HER along with a substantial improvement in the charge-transfer kinetics. Electron microscopy and elemental characterization of our samples show that the MoSe2 nanoflowers retain their structural integrity without any evidence for dopant clustering, thus confirming true substitutional doping of the catalyst. Complementary density functional theory calculations reveal that the substitutional Mn-dopants act as promoters, rather than enhanced active sites, for the formation of Se-vacancies in MoSe2 that are known to be catalytically active for HER. Our work advances possible strategies for activating MoSe2 and similar TMDs by the use of substitutional dopants, not for their inherent activity, but as promoters of active chalcogen vacancies.

Growth Mechanisms and Electronic Properties of Vertically Aligned MoS2.

Thin films of layered semiconductors emerge as highly promising materials for energy harvesting and storage, optoelectronics and catalysis. Their natural propensity to grow as oriented crystals and films is one of their distinct properties under recent focal interest. Specifically, the reaction of transition metal films with chalcogen vapor can result in films of vertically aligned (VA) layers, while metal-oxides react with chalcogens in vapor phase to produce horizontally aligned crystals and films. The growth mechanisms of vertically oriented films are not yet fully understood, as well as their dependence on the initial metal film thickness and growth conditions. Moreover, the resulting electronic properties and the role of defects and disorder had not yet been studied, despite their critical influence on catalytic and device performance. In this work, we study the details of oriented growth of MoS2 with complementary theoretical and experimental approaches. We present a general theoretical model of diffusion-reaction growth that can be applied to a large variety of layered materials synthesized by solid-vapor reaction. Moreover, we inspect the relation of electronic properties to the structure of vertically aligned MoS2 and shed light on the density and character of defects in this material. Our measurements on Si-MoS2 p-n hetero-junction devices point to the existence of polarizable defects that impact applications of vertical transition-metal dichalcogenide materials.

Enhancing the catalytic activity of the alkaline hydrogen evolution reaction by tuning the S/Se ratio in the Mo(SxSe1-x)2 catalyst.

The alkaline hydrogen evolution reaction (HER) plays a key role in photo(electro)catalytic water splitting technologies, particularly in water-alkali electrolyzers. Unfortunately, although transition metal dichalcogenide (TMD) materials, especially MoS2 and MoSe2, are considered efficient, Earth-abundant catalysts for the HER in an acidic electrolyte, they are much less effective under high pH conditions due to a sluggish water dissociation process (Volmer-step) and strong adsorption of the OH- intermediate on their surfaces. Herein we show a novel synergetic effect obtained by tailoring the S/Se ratio in Mo(SxSe1-x)2 alloys. We were able to influence the metal oxidation state and d-band to optimize the catalytic sites for HOH dissociation and OH- desorption while maintaining favourable M-H energetics. The Mo(SxSe1-x)2 (x = 0.58) catalyst exhibited high performance with an onset potential of -43 mV in 0.5 M KOH, i.e., ∼3 and ∼4-fold less than that for MoSe2 and MoS2, respectively. The results obtained in the current study have implications for the rational design of cost-effective electro-catalysts for water reduction based on TMD alloys.

Flatlands in the Holy Land: The Evolution of Layered Materials Research in Israel.

The experimental identification of fullerenes in 1985, carbon nanotubes in 1991, inorganic nanotubes in 1992, and graphene in 2004 are cornerstone events that have marked the beginning of the layered nanostructures era of materials science. Nowadays, the synthesis of such low-dimensional systems is a routine practice allowing the controlled fabrication of 0-, 1-, and 2D layered structures of diverse chemical compositions. These systems possess unique physical properties that stem from their structural anisotropy characterized by strong intralayer covalent bonding and weaker interlayer dispersive interactions. This, in turn, results in promising functionality that attracts the attention of scientists from many disciplines including chemists, physicists, material scientists, engineers, as well as life scientists that are interested in both their basic and applied science aspects. Here, a short review of the contribution of the Israeli scientific community to this effort over the past 3 decades, is provided.

Improved catalytic activity of Mo1-xWxSe2 alloy nanoflowers promotes efficient hydrogen evolution reaction in both acidic and alkaline aqueous solutions.

Layered transition metal dichalcogenides are noble-metal free electrocatalysts for the hydrogen evolution reaction (HER). Instead of using the common hydrothermal synthesis, which requires high pressure and temperature, herein a relatively simple and controlled colloidal synthesis was used to produce an alloy of Mo1-xWxSe2 with nanoflower morphology as a model system for the electrocatalysis of hydrogen evolution in both acidic and alkaline environments. The results show that Mo1-xWxSe2 alloys exhibit better catalytic activity in both acidic and alkaline solutions with low overpotentials compared to pure MoSe2 and WSe2. Moreover, the electrode kinetics was studied using electrochemical impedance spectroscopy (EIS) and the results indicate that the alloys exhibit improved catalytic activity with low Tafel slopes, making them appealing for HER in either environment. Additionally, when MoSe2 nanoflowers (NFs) are prepared by using different metal salts and chalcogenide precursors, changes in the HER catalytic activity were observed, despite the morphology and crystal structure similarities. This finding suggests that different results reported in the literature could originate from different synthetic methods of the TMD, emphasizing that a better understanding of the relationship between the synthetic route and the catalytic performance is still lacking.

The effect of atomic disorder at the core-shell interface on stacking fault formation in hybrid nanoparticles.

On the atomic scale, the exact engineering of interfaces affects the overall properties of functional nanostructures. One factor that is considered both fundamental and practical in determining the structural features of interfaces is the lattice mismatch, but zooming into the atomic scale reveals new data, which suggest that this paradigm should be reconsidered. Here, we used advanced transmission electron microscopy techniques to image, with atomic resolution, the core-shell interfaces of a strain-free system (CdSe@CdSe) and of a strain-induced system (CdSe@CdS). Then, we analyzed the pattern of stacking fault formation in these particles and correlated the location of the stacking faults with the synthetic procedure. We found that, in the strain-free system, the formation of stacking faults is substantial and the faults are located mostly at the core-shell interface, in a pattern that was surprisingly similar to that observed in the strain-induced system. Therefore, we conclude that the formation of faults within the nanoparticles results mainly from the interaction between the last atomic layer and the growth solution, and it is only weakly correlated with lattice mismatch. This finding is important for the design of defect-engineering in multi-step syntheses.

Designing Bimetallic Co-Catalysts: A Party of Two.

The enhanced catalytic properties of bimetallic particles has made them the focus of extensive research. We compare the photocatalytic activity for hydrogen production of core-shell structures of Au@Pd and Au@(Au/Pd alloy) on seeded rods of CdSe@CdS and show that Au@alloy was superior toward hydrogen production. Our finding reveals that the promotion effects of Au in Pd originate both from the alteration of the electronic structure by the Au core as well as by the atomic rearrangement of the surface. Long-term monitoring of the activity of the photocatalysts offered insights into the dynamic processes during the illumination showing that the tip morphology influenced the stability of the hybrid structures. The Au core served as a physical barrier, protecting the CdS rod against cation exchange reactions with the Pd. The coupling of these factors to achieve synergistic effects is therefore a prime aspect in the rational design of efficient cocatalysts.

Atomic-scale evolution of a growing core-shell nanoparticle.

Understanding the atomic-scale growth at solid/solution interfaces is an emerging frontier in molecular and materials chemistry. This is particularly challenging when studying chemistry occurring on the surfaces of nanoparticles in solution. Here, we provide atomic-scale resolution of growth, in a statistical approach, at the surfaces of inorganic nanoparticles by state-of-the-art aberration-corrected transmission electron microscopy (TEM) and focal series reconstruction. Using well-known CdSe nanoparticles, we unfold new information that, for the first time, allows following growth directly, and the subsequent formation of CdS shells. We correlate synthetic procedures with resulting atomic structure by revealing the distribution of lattice disorder (such as stacking faults) within the CdSe core particles. With additional sequential synthetic steps, an ongoing transformation of the entire structure occurs, such that annealing takes place and stacking faults are eliminated from the core. The general strategy introduced here can now be used to provide equally revealing atomic-scale information concerning the structural evolution of inorganic nanostructures.

Enantioselective control of lattice and shape chirality in inorganic nanostructures using chiral biomolecules.

A large number of inorganic materials form crystals with chiral symmetry groups. Enantioselectively synthesizing nanostructures of such materials should lead to interesting optical activity effects. Here we report the synthesis of colloidal tellurium and selenium nanostructures using thiolated chiral biomolecules. The synthesis conditions are tuned to obtain tellurium nanostructures with chiral shapes and large optical activity. These nanostructures exhibit visible optical and chiroptical responses that shift with size and are successfully simulated by an electromagnetic model. The model shows that they behave as chiral optical resonators. The chiral tellurium nanostructures are transformed into chiral gold and silver telluride nanostructures with very large chiroptical activity, demonstrating a simple colloidal chemistry path to chiral plasmonic and semiconductor metamaterials. These materials are natural candidates for studies related to interactions of chiral (bio)molecules with chiral inorganic surfaces, with relevance to asymmetric catalysis, chiral crystallization and the evolution of homochirality in biomolecules.

Direct imaging of single Au atoms within GaAs nanowires.

Incorporation of catalyst atoms during the growth process of semiconductor nanowires reduces the electron mean free path and degrades their electronic properties. Aberration-corrected scanning transmission electron microscopy (STEM) is now capable of directly imaging single Au atoms within the dense matrix of a GaAs crystal, by slightly tilting the GaAs lattice planes with respect to the incident electron beam. Au doping values in the order of 10(17-18) cm(3) were measured, making ballistic transport through the nanowires practically inaccessible.

Correlating electron tomography and plasmon spectroscopy of single noble metal core-shell nanoparticles.

The 3D structure reconstruction of gold core-silver shell nanoparticles by electron tomography is combined with optical dark-field spectroscopy. Electron tomography allows segmentation of the particles into core and shell subvolumes and facilitates avoiding Bragg diffraction artifacts inherent in 2D images. This advantage proves essential for accurate correlation of plasmon spectra and structure. We find that for the nanoparticles of near-spherical shape studied here the plasmon resonances depend on the relative size of the core and shell, rather than on their exact shapes and concentricity. A remarkable dependence of the spectral shape on the permittivity of the surrounding medium is also demonstrated, suggesting that core-shell nanoparticles can be used as ratiometric sensors with a very high dynamic range.

Hybrid nanoscale inorganic cages.

Cage structures exhibit inherent high symmetry and beauty, and both naturally occurring and synthetic molecular-scale cages have been discovered. Their characteristic high surface area and voids have led to their use as catalysts and catalyst supports, filtration media and gas storage materials. Nanometre-scale cage structures have also been synthesized, notably noble-metal cube-shaped cages prepared by galvanic displacement with promising applications in drug delivery and catalysis. Further functionality for nanostructures in general is provided by the concept of hybrid nanoparticles combining two disparate materials on the same system to achieve synergistic properties stemming from unusual material combinations. We report the integration of the two powerful concepts of cages and hybrid nanoparticles. A previously unknown edge growth mechanism has led to a new type of cage-structured hybrid metal-semiconductor nanoparticle; a ruthenium cage was grown selectively on the edges of a faceted copper(I) sulphide nanocrystal, contrary to the more commonly observed facet and island growth modes of other hybrids. The cage motif was extended by exploiting the open frame to achieve empty cages and cages containing other semiconductors. Such previously unknown nano-inorganic cage structures with variable cores and metal frames manifest new chemical, optical and electronic properties and demonstrate possibilities for uses in electrocatalysis.

Hollow V(2)O(5) nanoparticles (fullerene-like analogues) prepared by laser ablation.

Nanoparticles of materials with layered structure are able to spontaneously form closed-cage nanostructures such as nested fullerene-like nanoparticles and nanotubes. This propensity has been demonstrated in a large number of compounds such as WS(2), NiCl(2), and others. Layered metal oxides possess a higher ionic character and consequently are stiffer and cannot be evenly folded. Vanadium pentoxide (V(2)O(5)), a layered metal oxide, has received much attention due to its attractive qualities in numerous applications such as catalysis and electronic and optical devices and as an electrode material for lithium rechargeable batteries. The synthesis by pulsed laser ablation (PLA) of V(2)O(5) hollow nanoparticles, which are closely (nearly) associated with inorganic "fullerene-like" (NIF-V(2)O(5)) nanoparticles, but not quite as perfect, is reported in the present work. The relation between the PLA conditions and the NIF-V(2)O(5) morphology is elucidated. A new mechanism leading to hollow nanostructure via crystallization of lower density amorphous nanoparticles is proposed. Transmission electron microscopy (TEM) is used extensively in conjunction with structural modeling of the NIF-V(2)O(5) in order to study the complex 3-D structure of the NIF-V(2)O(5) nanoparticles. This structure was shown to be composed of facets with their low-energy surfaces pointing outward and seamed by defective domains. These understandings are used to formulate a formation mechanism and may improve the function of V(2)O(5) in its many uses through additional morphological control. Furthermore, this study outlines which properties are required from layered compounds to fold into perfectly closed-cage IF nanoparticles.

Bright-field electron tomography of individual inorganic fullerene-like structures.

Nanotubes and fullerene-like nanoparticles of various inorganic layered compounds have been studied extensively in recent years. Their characterisation on the atomic scale has proven essential for progress in synthesis as well as for the theoretical modelling of their physical properties. We show that with electron tomography it is possible to achieve a reliable reconstruction of the 3D structure of nested WS(2) or MoS(2) fullerene-like and nanotube structures with sub-nanometre resolution using electron microscopes that are not aberration-corrected. Model-based simulations were used to identify imaging parameters, under which structural features such as the shell structure can be retained in the tomogram reconstructed from bright-field micrographs. The isolation of a particle out of an agglomerate for the analysis of a single structure and its interconnection with other particles is facilitated through the tomograms. The internal structure of the layers within the particle alongside the shape and content of its internal void are reconstructed. The tomographic reconstruction yields insights regarding the growth process as well as structural defects, such as non-continuous layers, which relate to the lubrication properties.