Onset of Mechanochromic Response in the High Strain Rate Uniaxial Compression of Spiropyran Embedded Silicone Elastomers.

The molecular processes that accompany dynamic mechanical response to large deformations at high strain rate (≈1000 s-1 or higher) underlie the early stages of damage in materials, but understanding of material response in this regime is typically limited to macroscopic constitutive equations. Here, spiropyran mechanophores are embedded in very short, stress-bearing strands in silicone elastomers, and their mechanochromic response to uniaxial compression is explored in a Split Hopkinson Pressure (or Kolsky) Bar. At strain rates of 1000 s-1 , the onset of mechanochromism occurs at lower strains, but higher stresses, than in the same materials under quasi-static loading. Similar to quasi-static loading, however, a negligible effect of mechanophore structure on the critical strain for colorimetric onset is observed. The results suggest that nonequilibrium, inhomogeneous local tension distributions in the elastomers lead to greater stress in individual strands than at the same strains under equilibrium loading, but that within the regions of force concentration, mechanochromic onset is determined primarily by a limiting local strain threshold.

A Hierarchical Nanoparticle-in-Micropore Architecture for Enhanced Mechanosensitivity and Stretchability in Mechanochromic Electronic Skins.

Biological tissues are multiresponsive and functional, and similar properties might be possible in synthetic systems by merging responsive polymers with hierarchical soft architectures. For example, mechanochromic polymers have applications in force-responsive colorimetric sensors and soft robotics, but their integration into sensitive, multifunctional devices remains challenging. Herein, a hierarchical nanoparticle-in-micropore (NP-MP) architecture in porous mechanochromic polymers, which enhances the mechanosensitivity and stretchability of mechanochromic electronic skins (e-skins), is reported. The hierarchical NP-MP structure results in stress-concentration-induced mechanochemical activation of mechanophores, significantly improving the mechanochromic sensitivity to both tensile strain and normal force (critical tensile strain: 50% and normal force: 1 N). Furthermore, the porous mechanochromic composites exhibit a reversible mechanochromism under a strain of 250%. This architecture enables a dual-mode mechanochromic e-skin for detecting static/dynamic forces via mechanochromism and triboelectricity. The hierarchical NP-MP architecture provides a general platform to develop mechanochromic composites with high sensitivity and stretchability.

'Seeing' Strain in Soft Materials.

Several technologies can be used for measuring strains of soft materials under high rate impact conditions. These technologies include high speed tensile test, split Hopkinson pressure bar test, digital image correlation and high speed X-ray imaging. However, none of these existing technologies can produce a continuous 3D spatial strain distribution in the test specimen. Here we report a novel passive strain sensor based on poly(dimethyl siloxane) (PDMS) elastomer with covalently incorporated spiropyran (SP) mechanophore to measure impact induced strains. We have shown that the incorporation of SP into PDMS at 0.25 wt% level can adequately measure impact strains via color change under a high strain rate of 1500 s-1 within a fraction of a millisecond. Further, the color change is fully reversible and thus can be used repeatedly. This technology has a high potential to be used for quantifying brain strain for traumatic brain injury applications.

Regiochemical Effects on Mechanophore Activation in Bulk Materials.

Mechanochromic force probes, including spiropyran derivatives, have proven to be useful in visualizing the stress/strain distribution and fracture behavior in polymeric materials. Here, we report the macroscopic response of silicone elastomers including cross-links made up of three spiropyran (SP) regioisomers. The SP derivatives SP( o), SP( m), and SP( p) are connected to the network through an identical attachment point on the indoline fragment and regioisomeric attachments ortho, meta, and para to the spirocyclic C-O bond on the benzaldehyde fragment, respectively. The relative colorimetric response of these regioisomers under quasi-static uniaxial tensile load is SP( o) > SP( m) > SP( p), consistent with the expected mechanical sensitivity of the regioisomers obtained from molecular modeling. The extrapolated strain onset for detectable activation of all three regioisomers, however, is indistinguishable and occurs at ∼90% uniaxial strain. Finally, the ratiometric response of the three isomers is constant across the strains investigated (90-135% uniaxial strain), in contrast to expectations based on simulations of strained intact polymer networks.

Substituent Effects and Mechanism in a Mechanochemical Reaction.

We report the effect of substituents on the force-induced reactivity of a spiropyran mechanophore. Using single molecule force spectroscopy, force-rate behavior was determined for a series of spiropyran derivatives substituted with H, Br, or NO2 para to the breaking spirocyclic C-O bond. The force required to achieve the rate constants of ∼10 s-1 necessary to observe transitions in the force spectroscopy experiments depends on the substituent, with the more electron withdrawing substituent requiring less force. Rate constants at 375 pN were determined for all three derivatives, and the force-coupled rate dependence on substituent identity is well explained by a Hammett linear free energy relationship with a value of ρ = 2.9, consistent with a highly polar transition state with heterolytic, dissociative character. The methodology paves the way for further application of linear free energy relationships and physical organic methodologies to mechanochemical reactions, and the characterization of new force probes should enable additional, quantitative studies of force-coupled molecular behavior in polymeric materials.

Mechanochromic Stretchable Electronics.

Soft and stretchable electronics are promising for a variety of applications such as wearable electronics, human-machine interfaces, and soft robotics. These devices, which are often encased in elastomeric materials, maintain or adjust their functionality during deformation, but can fail catastrophically if extended too far. Here, we report new functional composites in which stretchable electronic properties are coupled to molecular mechanochromic function, enabling at-a-glance visual cues that inform user control. These properties are realized by covalently incorporating a spiropyran mechanophore within poly(dimethylsiloxane) to indicate with a visible color change that a strain threshold has been reached. The resulting colorimetric elastomers can be molded and patterned so that, for example, the word "STOP" appears when a critical strain is reached, indicating to the user that further strain risks device failure. We also show that the strain at color onset can be controlled by layering silicones with different moduli into a composite. As a demonstration, we show how color onset can be tailored to indicate a when a specified frequency of a stretchable liquid metal antenna has been reached. The multiscale combination of mechanochromism and soft electronics offers a new avenue to empower user control of strain-dependent properties for future stretchable devices.