ABSTRACT
Emerging additive manufacturing (AM) strategies can enable the engineering of hierarchal scaffold structures for guiding tissue regeneration. Here, the advantages of two AM approaches, melt electrowriting (MEW) and fused deposition modelling (FDM), are leveraged and integrated to fabricate hybrid scaffolds for large bone defect healing. MEW is used to fabricate a microfibrous core to guide bone healing, while FDM is used to fabricate a stiff outer shell for mechanical support, with constructs being coated with pro-osteogenic calcium phosphate (CaP) nano-needles. Compared to MEW scaffolds alone, hybrid scaffolds prevent soft tissue collapse into the defect region and support increased vascularization and higher levels of new bone formation 12 weeks post-implantation. In an additional group, hybrid scaffolds are also functionalized with BMP2 via binding to the CaP coating, which further accelerates healing and facilitates the complete bridging of defects after 12 weeks. Histological analyses demonstrate that such scaffolds support the formation of well-defined annular bone, with an open medullary cavity, smooth periosteal surface, and no evidence of abnormal ectopic bone formation. These results demonstrate the potential of integrating different AM approaches for the development of regenerative biomaterials, and in particular, demonstrate the enhanced bone healing outcomes possible with hybrid MEW-FDM constructs.
Subject(s)
Tissue Engineering , Tissue Scaffolds , Tissue Scaffolds/chemistry , Tissue Engineering/methods , Biocompatible Materials/chemistry , Bone and Bones , Wound Healing , Bone RegenerationABSTRACT
Meniscus injuries are a common problem in orthopedic medicine and are associated with a significantly increased risk of developing osteoarthritis. While developments have been made in the field of meniscus regeneration, the engineering of cell-laden constructs that mimic the complex structure, composition and biomechanics of the native tissue remains a significant challenge. This can be linked to the use of cells that are not phenotypically representative of the different zones of the meniscus, and an inability to direct the spatial organization of engineered meniscal tissues. In this study we investigated the potential of zone-specific meniscus progenitor cells (MPCs) to generate functional meniscal tissue following their deposition into melt electrowritten (MEW) scaffolds. We first confirmed that fibronectin selected MPCs from the inner and outer regions of the meniscus maintain their differentiation capacity with prolonged monolayer expansion, opening their use within advanced biofabrication strategies. By depositing MPCs within MEW scaffolds with elongated pore shapes, which functioned as physical boundaries to direct cell growth and extracellular matrix production, we were able to bioprint anisotropic fibrocartilaginous tissues with preferentially aligned collagen networks. Furthermore, by using MPCs isolated from the inner (iMPCs) and outer (oMPCs) zone of the meniscus, we were able to bioprint phenotypically distinct constructs mimicking aspects of the native tissue. An iterative MEW process was then implemented to print scaffolds with a similar wedged-shaped profile to that of the native meniscus, into which we deposited iMPCs and oMPCs in a spatially controlled manner. This process allowed us to engineer sulfated glycosaminoglycan and collagen rich constructs mimicking the geometry of the meniscus, with MPCs generating a more fibrocartilage-like tissue compared to the mesenchymal stromal/stem cells. Taken together, these results demonstrate how the convergence of emerging biofabrication platforms with tissue-specific progenitor cells can enable the engineering of complex tissues such as the meniscus.
Subject(s)
Bioprinting , Meniscus , Bioprinting/methods , Stem Cells , Tissue Engineering/methods , Collagen , Tissue Scaffolds/chemistryABSTRACT
Decellularized extracellular matrix (dECM) has emerged as a promising biomaterial in the fields of tissue engineering and regenerative medicine due to its ability to provide specific biochemical and biophysical cues supportive of the regeneration of diverse tissue types. Such biomaterials have also been used to produce tissue-specific inks and bioinks for 3D printing applications. However, a major limitation associated with the use of such dECM materials is their poor mechanical properties, which limits their use in load-bearing applications such as meniscus regeneration. In this study, native porcine menisci were solubilized and decellularized using different methods to produce highly concentrated dECM inks of differing biochemical content and printability. All dECM inks displayed shear thinning and thixotropic properties, with increased viscosity and improved printability observed at higher pH levels, enabling the 3D printing of anatomically defined meniscal implants. With additional crosslinking of the dECM inks following thermal gelation at pH 11, it was possible to fabricate highly elastic meniscal tissue equivalents with compressive mechanical properties similar to the native tissue. These improved mechanical properties at higher pH correlated with the development of a denser network of smaller diameter collagen fibers. These constructs also displayed repeatable loading and unloading curves when subjected to long-term cyclic compression tests. Moreover, the printing of dECM inks at the appropriate pH promoted a preferential alignment of the collagen fibers. Altogether, these findings demonstrate the potential of 3D printing of highly concentrated meniscus dECM inks to produce mechanically functional and biocompatible implants for meniscal tissue regeneration. This approach could be applied to a wide variety of different biological tissues, enabling the 3D printing of tissue mimics with diverse applications from tissue engineering to surgical planning.
ABSTRACT
The meniscus is a fibrocartilage tissue that is integral to the correct functioning of the knee joint. The tissue possesses a unique collagen fiber architecture that is integral to its biomechanical functionality. In particular, a network of circumferentially aligned collagen fibers function to bear the high tensile forces generated in the tissue during normal daily activities. The limited regenerative capacity of the meniscus has motivated increased interest in meniscus tissue engineering; however, the in vitro generation of structurally organized meniscal grafts with a collagen architecture mimetic of the native meniscus remains a significant challenge. Here we used melt electrowriting (MEW) to produce scaffolds with defined pore architectures to impose physical boundaries upon cell growth and extracellular matrix production. This enabled the bioprinting of anisotropic tissues with collagen fibers preferentially oriented parallel to the long axis of the scaffold pores. Furthermore, temporally removing glycosaminoglycans (sGAGs) during the early stages of in vitro tissue development using chondroitinase ABC (cABC) was found to positively impact collagen network maturation. Specially we found that temporal depletion of sGAGs is associated with an increase in collagen fiber diameter without any detrimental effect on the development of a meniscal tissue phenotype or subsequent extracellular matrix production. Moreover, temporal cABC treatment supported the development of engineered tissues with superior tensile mechanical properties compared to empty MEW scaffolds. These findings demonstrate the benefit of temporal enzymatic treatments when engineering structurally anisotropic tissues using emerging biofabrication technologies such as MEW and inkjet bioprinting.
Subject(s)
Chondroitin ABC Lyase , Meniscus , Chondroitin ABC Lyase/pharmacology , Tissue Engineering , Collagen/pharmacology , Extracellular MatrixABSTRACT
The meniscus is characterised by an anisotropic collagen fibre network which is integral to its biomechanical functionality. The engineering of structurally organized meniscal grafts that mimic the anisotropy of the native tissue remains a significant challenge. In this study, inkjet bioprinting was used to deposit a cell-laden bioink into additively manufactured scaffolds of differing architectures to engineer fibrocartilage grafts with user defined collagen architectures. Polymeric scaffolds consisting of guiding fibre networks with varying aspect ratios (1:1; 1:4; 1:16) were produced using either fused deposition modelling (FDM) or melt electrowriting (MEW), resulting in scaffolds with different internal architectures and fibre diameters. Scaffold architecture was found to influence the spatial organization of the collagen network laid down by the jetted cells, with higher aspect ratios (1:4 and 1:16) supporting the formation of structurally anisotropic tissues. The MEW scaffolds supported the development of a fibrocartilaginous tissue with compressive mechanical properties similar to that of native meniscus, while the anisotropic tensile properties of these constructs could be tuned by altering the fibre network aspect ratio. This MEW framework was then used to generate scaffolds with spatially distinct fibre patterns, which in turn supported the development of heterogenous tissues consisting of isotropic and anisotropic collagen networks. Such bioprinted tissues could potentially form the basis of new treatment options for damaged and diseased meniscal tissue. STATEMENT OF SIGNIFICANCE: This study describes a multiple tool biofabrication strategy which enables the engineering of spatially organized fibrocartilage tissues. The architecture of MEW scaffolds can be tailored to not only modulate the directionality of the collagen fibres laid down by cells, but also to tune the anisotropic tensile mechanical properties of the resulting constructs, thereby enabling the engineering of biomimetic meniscal-like tissues. Furthermore, the inherent flexibility of MEW enables the development of zonally defined and potentially patient-specific implants.
Subject(s)
Bioprinting , Meniscus , Humans , Tissue Scaffolds , Tissue Engineering/methods , Bioprinting/methods , Anisotropy , CollagenABSTRACT
Negative foreign body responses following the in vivo implantation of bioprinted implants motivate the development of novel bioinks which can rapidly degrade with the formation of functional tissue, whilst still maintaining desired shapes post-printing. Here, we investigated the oxidation of alginate as a means to modify the degradation rate of alginate-based bioinks for cartilage tissue engineering applications. Raw and partially oxidized alginate (OA) were combined at different ratios (Alginate:OA at 100:0; 75:25; 50:50; 25:75; 0:100) to provide finer control over the rate of bioink degradation. These alginate blends were then combined with a temporary viscosity modifier (gelatin) to produce a range of degradable bioinks with rheological properties suitable for extrusion bioprinting. The rate of degradation was found to be highly dependent on the OA content of the bioink. Despite this high mass loss, the initially printed geometry was maintained throughout a 4 week in vitro culture period for all bioink blends except the 0:100 group. All bioink blends also supported robust chondrogenic differentiation of mesenchymal stem/stromal cells (MSCs), resulting in the development of a hyaline-like tissue that was rich in type II collagen and negative for calcific deposits. Such tuneable inks offer numerous benefits to the field of 3D bioprinting, from providing space in a controllable manner for new extracellular matrix deposition, to alleviating concerns associated with a foreign body response to printed material inks in vivo.
ABSTRACT
OBJECTIVE: To evaluate the usefulness of the examination of the upper airway, paying special attention to the Friedman tongue position (FTP), to confirm obstructive sleep apnea syndrome (OSAS) and its severity. DESIGN: Prospective, single-center, cross-sectional study. SETTING: Sleep disorders unit of a community hospital. PATIENTS: A total of 301 consecutive patients admitted to the sleep disorders unit due to suspicion of OSAS. Assessments included body mass index calculated as weight in kilograms divided by height in meters squared (BMI); neck perimeter measurement; oropharyngeal examination; fiberendoscopy; rhinomanometry; and a sleep study. MAIN OUTCOME MEASURES: Apnea-hypopnoea index (AHI), FTP, the uvula size, and certain complementary examinations (sex, age, BMI, cervical perimeter, nasal flow) whose importance has not been clearly established, and to explore their potential value as predictors of the AHI. RESULTS: Findings included the following: the mean (SD) age of the patients was 51 (12) years; 71.1% were male; the mean (SD) BMI was 29.8 (4.6); and the mean (SD) cervical perimeter, 40.5 (3.7) cm. In 94.0% of the patients the AHI value was at least 5.0/hour. Patients with FTP scores of 2 and 3 accounted for 74.1% of the whole cohort: 14.3% had an FTP score of 1, and only 11.6% had a score of 4. Of the 6.0% of cases with a normal AHI, 16 patients were classified as having FTP scores of 1, and 2 as having a score of 2. Tonsil size score (P = .005), uvula score (P = .003), BMI (P < .001), cervical perimeter (P < .001), nasal flow at 150 Pa (P = .02), and age (P = .007) were related to OSAS severity. Curiously, AHI in patients who had undergone tonsillectomy was higher than in the TS1 group (tonsils inside the tonsillar fossa) and quite similar to the TS 2 group (tonsils that extend beyond the tonsillar pillars). In the multiple regression model, only the FTP score showed a relevant relationship to OSAS severity. CONCLUSIONS: First, since the FTP score is almost the only parameter related to OSAS severity, a simple oropharyngeal examination can provide key information on this issue. Second, tonsillectomy does not seem to protect against development of OSAS.