Determination of organic compounds in landfill leachates treated by Fenton-Adsorption.

The objective of this study was to identify the organic compounds removed from the leachate when treated with Fenton-Adsorption by gas chromatography coupled to mass spectrometry (GC-MS) in order to identify toxic compounds that could be harmful for the environment or human health. The physicochemical characterization of the raw leachate was carried out before and after the Fenton-Adsorption process. The effluent from each stage of this process was characterized: pH, Biological Oxygen Demand (BOD(5)), Chemical Oxygen Demand (COD), Total Organic Carbon (TOC), Total Carbon (TC), Inorganic Carbon (IC), Total Solids (TS), Total Suspended Solids (TSS) and Color. The organic compounds were determined by GC-MS. The removal of COD and color reached over 99% in compliance with the Mexican Standard NOM-001-SEMARNAT-1996, which establishes the maximum permissible limits for contaminants present in wastewater discharges to water and national goods. The chromatographic analysis from the Fenton-Adsorption effluent proved that this treatment removed more than 98% of the organic compounds present in the initial sample. The mono (2-ethylhexyl) ester 1,2-benzenedicarboxylic acid persisted, although it is not considered as toxic compound by the NOM-052-SEMARNAT-2005. Therefore, the treated effluent can be safely disposed of into the environment.

Effect of fulvic acid on the photochemical degradation of methylparathion.

Photochemical degradation of methylparathion (O,O,-dimethyl O-4 nitrophenylphosphorothioate) in the presence of fulvic acid (FA) between pH 2 and 7 was studied by differential pulse polarography (DPP). Fulvic acid and its photoproducts were not electro-active under the experimental conditions used in this study, and only the pesticide exhibited polarographic signals. Photolysis of methylparathion in acid media was sensitized by fulvic acid since the pesticide did not degrade in the absence of this compound. Methylparathion degradation was observed at each of the studied pHs. The reaction was first-order with rate constant values ranging from 3.3 x 10(-3) to 8.8 x 10(-3)min(-1).

Photochemical degradation of methylparathion in the presence of humic acid.

Photochemical degradation of methylparathion (O,O,-dimethyl O-4 nitrophenylphosphorothioate) in the presence of humic acid between pH 2 and 7 was monitored by differential pulse polarography. Humic acid was not electro-active under the experimental conditions used in this study. Only the pesticide and its main degradation product at pH 2 exhibited polarographic signals. Photolysis of methylparathion in acid media was sensitized by humic acid since the pesticide did not degrade in the absence of this compound. Methylparathion degradation in the presence of humic acid was observed at each of the studied pHs. The reaction was first-order with rate constant values ranging from 2 x 10(-3) to 6.3 x 10(-3) min(-1).

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium.

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at lambda = 254 nm. The photolysis of (alpha + beta: 2 + 1) endosulfan, alpha-endosulfan and beta-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 x 10(-4) s(-1); 1 x 10(-4) s(-1); and 2 x 10(-5) s(-1), respectively, and the calculated quantum yields (phi) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.

Effect of Fe (III) on acid degradation of methylparathion.

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 x 10(- 3) h(- 1) to 7.0 x 10(- 3) h(- 1). The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.

Electrochemical monitoring of methylparathion degradation in an acid aqueous medium in presence of Cu(II).

A study was undertaken to determine the effect of Cu(II) in degradation of methylparathion (o,o-dimethyl o,4-nitrophenyl phosphoriotioate) in acid medium. Initial electrochemical characterization of Cu(II) and methylparathion was done in an aqueous medium at a pH range of 2-7. Cu(II) was studied in the presence of different anions and it was observed that its electroactivity depends on pH and is independent of the anion used. Methylparathion had two reduction signals at pH < or = 6 and only one at pH > 6. The pesticide's transformation kinetic was then studied in the presence of Cu(II) in acid buffered aqueous medium at pH values of 2, 4, and 7. Paranitrophenol appeared as the only electroactive product at all three pH values. The reaction was first order and had k values of 5.2 x 10(-3) s(-1) at pH 2, 5.5 x 10(-3) s(-1) at pH 4 and 9.0 x 10(-3) s(-1) at pH 7. It is concluded that the principal degradation pathway of methylparathion in acid medium is a Cu(II) catalyzed hydrolysis reaction.