If self-shading is so bad, why is there so much? Short shoots reconcile costs and benefits.

If trees minimize self-shading, new foliage in shaded parts of the crown should remain minimal. However, many species have abundant foliage on short shoots inside their crown. In this paper, we test the hypothesis that short shoots allow trees to densify their foliage in self-shaded parts of the crown thanks to reduced costs. Using 30 woody species in Mediterranean and tropical biomes, we estimated the contribution of short shoots to total plant foliage, calculated their costs relative to long shoots including wood cost and used 3D plant simulations calibrated with field measurements to quantify their light interception, self-shading and yield. In species with short shoots, leaves on short shoots account for the majority of leaf area. The reduced cost of short stems enables the production of leaf area with 36% less biomass. Simulations show that although short shoots are more self-shaded, they benefit the plant because they cost less. Lastly, the morphological properties of short shoots have major implications for whole plant architecture. Taken together, our results question the validity of only assessing leaf costs to understand leaf economics and call for more integrated observations at the crown scale to understand light capture strategies in woody plants.

Relationships Between Enamel Prism Decussation and Organization of the Ameloblast Layer in Rodent Incisors.

Rodent enamel microstructure has been extensively investigated, primarily on the basis of 2D electronic microscopy data. The nature and dynamics of the ameloblasts (the enamel-secreting cells) have also been well studied. However, critical issues still remain surrounding exactly how the ameloblasts produce the astonishing microstructural complexity of enamel, and how this subtle architecture evolved through time. In this article, we used a new methodology based on confocal laser microscopy to reconstruct the enamel microstructure of rodent incisors in three dimensions (3D) with the ameloblasts in situ. We proposed interpretations regarding the possible relationships between the workings of the ameloblasts and the resulting enamel prisms, especially how the phenomenon of decussation is generated. Finally, we were able to represent the two main types of modern rodent incisor microstructures (uniserial and multiserial decussations), as a set of parameters that have been entered into the 3D enamel simulation software Simulenam to generate 3D models that can be digitally manipulated. Associating 2D data of incisor enamel microstructure of fossil rodents and Simulenam, it was then possible to better understand how the various decussation parameters evolved through time and gave rise to the two modern microstructure types from the same ancestral type (pauciserial). This study also confirmed that rodent and artiodactyl enamel do not share the same mechanism of decussation formation. Anat Rec, 302:1195-1209, 2019. © 2018 Wiley Periodicals, Inc.

DigR: a generic model and its open source simulation software to mimic three-dimensional root-system architecture diversity.

Background and Aims: Many studies exist in the literature dealing with mathematical representations of root systems, categorized, for example, as pure structure description, partial derivative equations or functional-structural plant models. However, in these studies, root architecture modelling has seldom been carried out at the organ level with the inclusion of environmental influences that can be integrated into a whole plant characterization. Methods: We have conducted a multidisciplinary study on root systems including field observations, architectural analysis, and formal and mathematical modelling. This integrative and coherent approach leads to a generic model (DigR) and its software simulator. Architecture analysis applied to root systems helps at root type classification and architectural unit design for each species. Roots belonging to a particular type share dynamic and morphological characteristics which consist of topological and geometric features. The DigR simulator is integrated into the Xplo environment, with a user interface to input parameter values and make output ready for dynamic 3-D visualization, statistical analysis and saving to standard formats. DigR is simulated in a quasi-parallel computing algorithm and may be used either as a standalone tool or integrated into other simulation platforms. The software is open-source and free to download at http://amapstudio.cirad.fr/soft/xplo/download. Key Results: DigR is based on three key points: (1) a root-system architectural analysis, (2) root type classification and modelling and (3) a restricted set of 23 root type parameters with flexible values indexed in terms of root position. Genericity and botanical accuracy of the model is demonstrated for growth, branching, mortality and reiteration processes, and for different root architectures. Plugin examples demonstrate the model's versatility at simulating plastic responses to environmental constraints. Outputs of the model include diverse root system structures such as tap-root, fasciculate, tuberous, nodulated and clustered root systems. Conclusions: DigR is based on plant architecture analysis which leads to specific root type classification and organization that are directly linked to field measurements. The open source simulator of the model has been included within a friendly user environment. DigR accuracy and versatility are demonstrated for growth simulations of complex root systems for both annual and perennial plants.

Does the structure-function model GREENLAB deal with crop phenotypic plasticity induced by plant spacing? A case study on tomato.

BACKGROUND AND AIMS: Plant growth models able to simulate phenotypic plasticity are increasingly required because (1) they should enable better predictions of the observed variations in crop production, yield and quality, and (2) their parameters are expected to have a more robust genetic basis, with possible implications for selection of quantitative traits such as growth- and allocation-related processes. The structure-function plant model, GREENLAB, simulates resource-dependent plasticity of plant architecture. Evidence for its generality has been previously reported, but always for plants grown in a limited range of environments. This paper aims to test the model concept to its limits by using plant spacing as a means to generate a gradient of competition for light, and by using a new crop species, tomato, known to exhibit a strong photomorphogenetic response. METHODS: A greenhouse experiment was carried out with three homogeneous planting densities (plant spacing = 0.3, 0.6 and 1 m). Detailed records of plant development, plant architecture and organ growth were made throughout the growing period. Model calibration was performed for each situation using a statistical optimization procedure (multi-fitting). KEY RESULTS AND CONCLUSIONS: Obvious limitations of the present version of the model appeared to account fully for the plant plasticity induced by inter-plant competition for light. A lack of stability was identified for some model parameters at very high planting density. In particular, those parameters characterizing organ sink strengths and governing light interception proved to be environment-dependent. Remarkably, however, responses of the parameter values concerned were consistent with actual growth measurements and with previously reported results. Furthermore, modifications of total biomass production and of allocation patterns induced by the planting-density treatments were accurately simulated using the sets of optimized parameters. These results demonstrate that the overall model structure is potentially able to reproduce the observed plant plasticity and suggest that sound biologically based adaptations could overcome the present model limitations. Potential options for model improvement are proposed, and the possibility of using the kernel algorithm currently available as a fitting tool to build up more sophisticated model versions is advocated.

Using a 3-D virtual sunflower to simulate light capture at organ, plant and plot levels: contribution of organ interception, impact of heliotropism and analysis of genotypic differences.

BACKGROUND AND AIMS: Light interception is a critical factor in the production of biomass. The study presented here describes a method used to take account of architectural changes over time in sunflower and to estimate absorbed light at the organ level. METHODS: The amount of photosynthetically active radiation absorbed by a plant is estimated on a daily or hourly basis through precise characterization of the light environment and three-dimensional virtual plants built using AMAP software. Several treatments are performed over four experiments and on two genotypes to test the model, quantify the contribution of different organs to light interception and evaluate the impact of heliotropism. KEY RESULTS: This approach is used to simulate the amount of light absorbed at organ and plant scales from crop emergence to maturity. Blades and capitula were the major contributors to light interception, whereas that by petioles and stem was negligible. Light regimen simulations showed that heliotropism decreased the cumulated light intercepted at the plant scale by close to 2.2% over one day. CONCLUSIONS: The approach is useful in characterizing the light environment of organs and the whole plant, especially for studies on heterogeneous canopies or for quantifying genotypic or environmental impacts on plant architecture, where conventional approaches are ineffective. This model paves the way to analyses of genotype-environment interactions and could help establish new selection criteria based on architectural improvement, enhancing plant light interception.

AmapSim: a structural whole-plant simulator based on botanical knowledge and designed to host external functional models.

BACKGROUND AND AIMS: AmapSim is a tool that implements a structural plant growth model based on a botanical theory and simulates plant morphogenesis to produce accurate, complex and detailed plant architectures. This software is the result of more than a decade of research and development devoted to plant architecture. New advances in the software development have yielded plug-in external functions that open up the simulator to functional processes. METHODS: The simulation of plant topology is based on the growth of a set of virtual buds whose activity is modelled using stochastic processes. The geometry of the resulting axes is modelled by simple descriptive functions. The potential growth of each bud is represented by means of a numerical value called physiological age, which controls the value for each parameter in the model. The set of possible values for physiological ages is called the reference axis. In order to mimic morphological and architectural metamorphosis, the value allocated for the physiological age of buds evolves along this reference axis according to an oriented finite state automaton whose occupation and transition law follows a semi-Markovian function. KEY RESULTS: Simulations were performed on tomato plants to demonstrate how the AmapSim simulator can interface external modules, e.g. a GREENLAB growth model and a radiosity model. CONCLUSIONS: The algorithmic ability provided by AmapSim, e.g. the reference axis, enables unified control to be exercised over plant development parameter values, depending on the biological process target: how to affect the local pertinent process, i.e. the pertinent parameter(s), while keeping the rest unchanged. This opening up to external functions also offers a broadened field of applications and thus allows feedback between plant growth and the physical environment.

Integrated responses of rosette organogenesis, morphogenesis and architecture to reduced incident light in Arabidopsis thaliana results in higher efficiency of light interception.

Plants have a high phenotypic plasticity in response to light. We investigated changes in plant architecture in response to decreased incident light levels in Arabidopsis thaliana (L.) Heynh, focusing on organogenesis and morphogenesis, and on consequences for the efficiency of light interception of the rosette. A. thaliana ecotype Columbia plants were grown under various levels of incident photosynthetically active radiation (PAR), with blue light (BL) intensity proportional to incident PAR intensity and with a high and stable red to far-red light ratio. We estimated the PAR absorbed by the plant, using data from precise characterisation of the light environment and 3-dimensional simulations of virtual plants generated with AMAPsim software. Decreases in incident PAR modified rosette architecture; leaf area decreased, leaf blades tended to be more circular and petioles were longer and thinner. However, the efficiency of light interception by the rosette was slightly higher in plants subjected to lower PAR intensities, despite the reduction in leaf area. Decreased incident PAR delayed leaf initiation and slowed down relative leaf expansion rate, but increased the duration of leaf expansion. The leaf initiation rate and the relative expansion rate during the first third of leaf development were related to the amount of PAR absorbed. The duration of leaf expansion was related to PAR intensity. The relationships identified could be used to analyse the phenotypic plasticity of various genotypes of Arabidopsis. Overall, decreases in incident PAR result in an increase in the efficiency of light interception.