Improvement of soil health and nutrient transformations under balanced fertilization with integrated nutrient management in a rice-wheat system in Indo-Gangetic Plains - A 34-year Research outcomes.

The impact of integrated nutrient management seems crucial for the sustainability of crop production as revealed by studies on long-term experiments. It provided the opportunity to monitor long-term variations in crop yields and associated factors. The impacts of various nutrient management strategies on yields and soil attributes in a rice-wheat system have been researched under a long-term experiment that has been running since 1983 at Punjab Agricultural University, Ludhiana. Further, a positive correlation has been observed between crop yields and soil properties such as soil organic carbon (SOC), nitrogen (N), phosphorus (P), potassium (K) and zinc (Zn). The negative correlation with K could be attributed to soil becoming deficient in K and necessitating the application of potassium fertilizer. The treatments receiving organic manures (green manure, farmyard manure and wheat cut straw) showed a better population of soil microorganisms in comparison to the treatments receiving chemical fertilizers, thereby proving as precursors of sustaining soil health. The best soil characteristics (water-soluble aggregates, exchangeable and non-exchangeable K, fixed and total K) after rice and wheat harvesting were found where 50 % of the recommended NPK was supplemented with farmyard manure (FYM). The build-up of trace elements particularly for Fe and Zn was also noticed. In crystalline Fe oxide bound fraction (CFeOX), Fe increased between 717.1 and 984.8 mg kg-1, while Zn increased between 2.64 and 3.08 mg kg-1. Furthermore, amorphous iron oxide (AFeOX), CFeOX, carbonate (CARB), organic matter (OM) bound and exchangeable (EXCH) Fe and Zn were higher in treatments where organic manures were supplemented with 50 and 25 % N. Farmyard manure showed an incremental trend, followed by wheat cut straw and green manure (GM). The incremental trend in soil quality was noticed with FYM followed by wheat cut straw and GM.

Selenium - An environmentally friendly micronutrient in agroecosystem in the modern era: An overview of 50-year findings.

Agricultural productivity is constantly being forced to maintain yield stability to feed the enormously growing world population. However, shrinking arable and nutrient-deprived soil and abiotic and biotic stressor (s) in different magnitudes put additional challenges to achieving global food security. Though well-defined, the concept of macro, micronutrients, and beneficial elements is from a plant nutritional perspective. Among various micronutrients, selenium (Se) is essential in small amounts for the life cycle of organisms, including crops. Selenium has the potential to improve soil health, leading to the improvement of productivity and crop quality. However, Se possesses an immense encouraging phenomenon when supplied within the threshold limit, also having wide variations. The supplementation of Se has exhibited promising outcomes in lessening biotic and abiotic stress in various crops. Besides, bulk form, nano-Se, and biogenic-Se also revealed some merits and limitations. Literature suggests that the possibilities of biogenic-Se in stress alleviation and fortifying foods are encouraging. In this article, apart from adopting a combination of a conventional extensive review of the literature and bibliometric analysis, the authors have assessed the journey of Se in the "soil to spoon" perspective in a diverse agroecosystem to highlight the research gap area. There is no doubt that the time has come to seriously consider the tag of beneficial elements associated with Se, especially in the drastic global climate change era.

Biofortification of mungbean (Vigna radiata L. (Wilczek)) with boron, zinc and iron alters its grain yield and nutrition.

Mungbean [Vigna radiata L. (Wilczek)] is considered as an extremely nutritious crop possessing a high level of micronutrients, but their low bioavailability in the crop leads to micronutrient malnutrition in humans. Therefore, the present study was conducted to investigate the potential of nutrients viz. boron (B), zinc (Zn) and iron (Fe) biofortification on productivity, nutrient concentration and uptake as well as the economics of mungbean cultivation. In the experiment, the various combinations of RDF with ZnSO4.7H2O (0.5%), FeSO4.7H2O (0.5%) and borax (0.1%) were applied to mungbean variety ML 2056. The combined foliar application of Zn, Fe and B was highly efficient in increasing the yield of grain as well as straw in mungbean exhibiting maximum values i.e. 944 kg ha-1 and 6133 kg ha-1, respectively. Similar results for B, Zn and Fe concentration in grain (27.3 mg kg-1, 35.7 mg kg-1 and 187.1 mg kg-1, respectively) and straw (21.1 mg kg-1, 18.6 mg kg-1 and 376.1 mg kg-1, respectively) of mungbean were observed. Also, uptake of Zn and Fe by grain (31.3 g ha-1 and 164.4 g ha-1, respectively), as well as straw (113.7 g ha-1 and 2295.0 g ha-1, respectively), was maximum for the above treatment. Whereas, the B uptake was found to enhance significantly through the combined application of B, Zn and Fe, where the values 24.0 g ha-1 and 128.7 g ha-1 corresponded to grain and straw, respectively. Thus, combined use of ZnSO4.7H2O (0.5%) + FeSO4.7H2O (0.5%) and borax (0.1%) significantly improved the yield outcomes, the concentration of B, Zn and Fe, uptake and economic returns of mungbean cultivation to alleviate the B, Zn and Fe deficiency.

Shoot transcriptome revealed widespread differential expression and potential molecular mechanisms of chickpea (Cicer arietinum L.) against Fusarium wilt.

Introduction: The yield of chickpea is severely hampered by infection wilt caused by several races of Fusarium oxysporum f. sp. ciceris (Foc). Methods: To understand the underlying molecular mechanisms of resistance against Foc4 Fusarium wilt, RNA sequencing-based shoot transcriptome data of two contrasting chickpea genotypes, namely KWR 108 (resistant) and GL 13001 (susceptible), were generated and analyzed. Results and Discussion: The shoot transcriptome data showed 1,103 and 1,221 significant DEGs in chickpea genotypes KWR 108 and GL 13001, respectively. Among these, 495 and 608 genes were significantly down and up-regulated in genotypes KWR 108, and 427 and 794 genes were significantly down and up-regulated in genotype GL 13001. The gene ontology (GO) analysis of significant DEGs was performed and the GO of the top 50 DEGs in two contrasting chickpea genotypes showed the highest cellular components as membrane and nucleus, and molecular functions including nucleotide binding, metal ion binding, transferase, kinase, and oxidoreductase activity involved in biological processes such as phosphorylation, oxidation-reduction, cell redox homeostasis process, and DNA repair. Compared to the susceptible genotype which showed significant up-regulation of genes involved in processes like DNA repair, the significantly up-regulated DEGs of the resistant genotypes were involved in processes like energy metabolism and environmental adaptation, particularly host-pathogen interaction. This indicates an efficient utilization of environmental adaptation pathways, energy homeostasis, and stable DNA molecules as the strategy to cope with Fusarium wilt infection in chickpea. The findings of the study will be useful in targeting the genes in designing gene-based markers for association mapping with the traits of interest in chickpea under Fusarium wilt which could be efficiently utilized in marker-assisted breeding of chickpea, particularly against Foc4 Fusarium wilt.

Design of Hardware and Software Equipment for Monitoring Selected Operating Parameters of the Irrigator.

The aim of this paper was to design a device for monitoring the work of irrigation technology (in our case, irrigation by sprinkler). Two devices for monitoring selected irrigation operating parameters for two hose reel irrigation machines were designed. During the monitored period of connection of the equipment to the sprinkler, 15 irrigation doses were carried out for both sprinklers. Irrigation operating characteristics working pressure, hose reel speed and selected weather conditions temperature and humidity were monitored. When evaluating the results, we proved the need to monitor the operation of the sprinkler not only by the coefficient of variation Cv, but also by introducing the coefficient of non-uniformity a. The results obtained indicate variability with respect to a particular irrigation dose and the applicable assessment method. The results were reviewed by one-way ANOVA analysis where observed coefficients and irrigation dose were considered as dependence factors. The results indicate a statistically significant impact of the applied quality coefficient of work and thus the impact of a particular device (p < 0.05, Fcrit = 2.77). When evaluating the effect of the included irrigation dose, we also showed a statistically significant effect in both facilities (p < 0.05, F = 1.92). By checking the operation of the hose reel irrigation machine, we managed to successfully apply the proposed classifications, which also perform the function of fault prediction. The proposed facilities show that proper plant operation and timely response can help create more efficient and sustainable irrigation services, not only saving water but also reducing costs for the owner.

Improvement in growth and yield attributes of cluster bean through optimization of sowing time and plant spacing under climate change scenario.

Cluster bean (Cyamopsis tetragonoloba L.) yield has plateaued due to reduction in rainfall and rise in temperature. Therefore, its production cycle could not get appropriate water and temperature. It becomes important to standardize the sowing time and plant spacing of cluster beans in changing climate scenarios to get higher productivity. Therefore, a field study was conducted in 2019 at the Research area of MNS-University of Agriculture, Multan, Pakistan to evaluate the effect of four sowing times (15th May, 1st June, 15th June, and 1st July) and three plant spacings (10, 12 and 15 cm) on crop growth, yield, and physiological functions of cluster bean genotype BR-2017 under split plot arrangement under randomized complete block design (RCBD) with three replications. The sowing times (15th May, 1st June, 15th June, and 1st July) were placed in the main plot, while plant spacing (10, 12 and 15 cm) was maintained in subplots. The significant effect of sowing time and plant spacing was observed on pod plant-1, pod length, grain yield, and 1000-grain weight. Results showed that 1st June sowing performed better over 15th May, 15th June, and 1st July, while plant spacing 15 cm about in all sowing times showed higher results on growth and yield parameters of cluster bean over plant spacing 10, 12, and 15 cm. The 1st June sowing time at 15 cm plant spacing showed 8.0, 22.7, and 28.5% higher grains pod-1 than 15th May, 15th June, and 1st July sowing, respectively. Maximum grain yield was observed on 1st June in all three spacings (10, 12, and 15 cm). The chord diagram indicates that the crop has received optimum environmental conditions when sown 1st June over other sowing times. In conclusion, 1st June sowing with 15 cm plant spacing could be a good option to achieve maximum productivity of cluster bean under changing climate scenario.

Assessment of wheat productivity responses and soil health dynamics under brackish ground water.

The continuous use of brackish groundwater for irrigation is detrimental for soil and crop attributes. A three-year research study was designed for the wheat crop to assess the effects of brackish groundwater on crop yield and soil health under a surface irrigation system. Three sites were selected in different cropping zones of Pakistan. The treatments comprised of irrigation with moderately brackish water having 0.8, 1.3 & 2.7 dSm-1 of salinity and canal water. The results indicated that EC, SAR, bicarbonates, Ca2+ and Mg2+ levels increased in the soil for consecutive years and this increase was more at site S3 followed by S2 and S1. As soil depth is concerned, the increase was more pronounced in upper layers of soil (0-15 cm) as compared to 15-30 cm depth. Growth and yield were also affected by the consecutive use of this water, the number of plants, plant height, the number of spikes per plant, and yield was reduced at all the three sites. However, the impact was less pronounced at the site S1 whereas S3 was the most affected one. Grain weight and dry matter weight were observed to be maximum at S1. Water productivity was also calculated for all the three sites. Maximum water productivity was observed at S1 followed by S2 & S3. It was concluded that the continuous use of brackish water would have an adverse effect on crop yield and subsequently, soil health is also affected by it significantly.

Biofortification-A Frontier Novel Approach to Enrich Micronutrients in Field Crops to Encounter the Nutritional Security.

Globally, many developing countries are facing silent epidemics of nutritional deficiencies in human beings and animals. The lack of diversity in diet, i.e., cereal-based crops deficient in mineral nutrients is an additional threat to nutritional quality. The present review accounts for the significance of biofortification as a process to enhance the productivity of crops and also an agricultural solution to address the issues of nutritional security. In this endeavor, different innovative and specific biofortification approaches have been discussed for nutrient enrichment of field crops including cereals, pulses, oilseeds and fodder crops. The agronomic approach increases the micronutrient density in crops with soil and foliar application of fertilizers including amendments. The biofortification through conventional breeding approach includes the selection of efficient genotypes, practicing crossing of plants with desirable nutritional traits without sacrificing agricultural and economic productivity. However, the transgenic/biotechnological approach involves the synthesis of transgenes for micronutrient re-translocation between tissues to enhance their bioavailability. Soil microorganisms enhance nutrient content in the rhizosphere through diverse mechanisms such as synthesis, mobilization, transformations and siderophore production which accumulate more minerals in plants. Different sources of micronutrients viz. mineral solutions, chelates and nanoparticles play a pivotal role in the process of biofortification as it regulates the absorption rates and mechanisms in plants. Apart from the quality parameters, biofortification also improved the crop yield to alleviate hidden hunger thus proving to be a sustainable and cost-effective approach. Thus, this review article conveys a message for researchers about the adequate potential of biofortification to increase crop productivity and nourish the crop with additional nutrient content to provide food security and nutritional quality to humans and livestock.

The intertwining of Zn-finger motifs and abiotic stress tolerance in plants: Current status and future prospects.

Environmental stresses such as drought, high salinity, and low temperature can adversely modulate the field crop's ability by altering the morphological, physiological, and biochemical processes of the plants. It is estimated that about 50% + of the productivity of several crops is limited due to various types of abiotic stresses either presence alone or in combination (s). However, there are two ways plants can survive against these abiotic stresses; a) through management practices and b) through adaptive mechanisms to tolerate plants. These adaptive mechanisms of tolerant plants are mostly linked to their signalling transduction pathway, triggering the action of plant transcription factors and controlling the expression of various stress-regulated genes. In recent times, several studies found that Zn-finger motifs have a significant function during abiotic stress response in plants. In the first report, a wide range of Zn-binding motifs has been recognized and termed Zn-fingers. Since the zinc finger motifs regulate the function of stress-responsive genes. The Zn-finger was first reported as a repeated Zn-binding motif, comprising conserved cysteine (Cys) and histidine (His) ligands, in Xenopus laevis oocytes as a transcription factor (TF) IIIA (or TFIIIA). In the proteins where Zn2+ is mainly attached to amino acid residues and thus espousing a tetrahedral coordination geometry. The physical nature of Zn-proteins, defining the attraction of Zn-proteins for Zn2+, is crucial for having an in-depth knowledge of how a Zn2+ facilitates their characteristic function and how proteins control its mobility (intra and intercellular) as well as cellular availability. The current review summarized the concept, importance and mechanisms of Zn-finger motifs during abiotic stress response in plants.

Water Regime Monitoring of the Royal Walnut (Juglans regia L.) Using Sap Flow and Dendrometric Measurements.

Changes in the distribution of annual rainfall totals, together with the increase in temperature over the last 40 years, are causing more frequent periods of drought, and plants are more often exposed to water stress. The aim of this study was to monitor the effect of different water regimes (irrigated and non-irrigated) of individuals of walnut tree (Juglans regia L.) in a private orchard located in the West of Slovakia. Our research was focused on dendrometric and sap flow measurements in the period from 28 March to 2 June 2019. The results showed differences in the sap flow of walnut trees during the budbreak period: when trees were irrigated, sap flow in the diurnal cycle was around 130 g·h-1 (20.48%), higher than in the non-irrigated treatment. Dendrometric differences between the irrigated and non-irrigated treatments were not significant. The sap flow data in the flowering period of the irrigated variant were slightly higher at 150 g·h-1 (35.62%) than non-irrigated. Dendrometric differences were more significant when the difference between the variants was more than 1.5 mm. Continuation of this research and analysis of the data obtained in the coming years will allow us to evaluate the effects of the environment on fruit trees in the long term.

Bioinoculants-Natural Biological Resources for Sustainable Plant Production.

Agricultural sustainability is of foremost importance for maintaining high food production. Irresponsible resource use not only negatively affects agroecology, but also reduces the economic profitability of the production system. Among different resources, soil is one of the most vital resources of agriculture. Soil fertility is the key to achieve high crop productivity. Maintaining soil fertility and soil health requires conscious management effort to avoid excessive nutrient loss, sustain organic carbon content, and minimize soil contamination. Though the use of chemical fertilizers have successfully improved crop production, its integration with organic manures and other bioinoculants helps in improving nutrient use efficiency, improves soil health and to some extent ameliorates some of the constraints associated with excessive fertilizer application. In addition to nutrient supplementation, bioinoculants have other beneficial effects such as plant growth-promoting activity, nutrient mobilization and solubilization, soil decontamination and/or detoxification, etc. During the present time, high energy based chemical inputs also caused havoc to agriculture because of the ill effects of global warming and climate change. Under the consequences of climate change, the use of bioinputs may be considered as a suitable mitigation option. Bioinoculants, as a concept, is not something new to agricultural science, however; it is one of the areas where consistent innovations have been made. Understanding the role of bioinoculants, the scope of their use, and analysing their performance in various environments are key to the successful adaptation of this technology in agriculture.