Design of lactoferrin functionalized carboxymethyl dextran coated egg albumin nanoconjugate for targeted delivery of capsaicin: Spectroscopic and cytotoxicity studies.

The increased mortality rates associated with colorectal cancer highlight the pressing need for improving treatment approaches. While capsaicin (CAP) has shown promising anticancer activity, its efficacy is hampered due to low solubility, rapid metabolism, suboptimal bioavailability, and a short half-life. Therefore, this study aimed to prepare a lactoferrin-functionalized carboxymethyl dextran-coated egg albumin nanoconjugate (LF-CMD@CAP-EGA-NCs) for the targeted CAP delivery to enhance its potential for colorectal cancer therapy. Briefly, LF-CMD was synthesized through an esterification reaction involving LF as a receptor and CMD as a shell. Concurrently, CAP was incorporated into an EGA carrier using gelation and hydrophobic interactions. The subsequent production of LF-CMD@CAP-EGA-NCs was achieved through the Maillard reaction. Spectral characterizations confirmed the successful synthesis of smooth and spherical-shaped LF-CMD@CAP-EGA-NCs using LF-CMD and EGA-CAP nanoparticles, with high entrapment efficiency and satisfactory drug content. Furthermore, LF-CMD@CAP-EGA-NCs demonstrated a sustained release of CAP (76.52 ± 1.01 % in 24 h, R2 = 0.9966) in pH 5.8 buffer with anomalous transport (n = 0.68) owing to the shell of the CMD and EGA matrix. The nanoconjugate exhibited enhanced cytotoxicity in HCT116 and LoVo cell lines, which is attributed to the overexpression of LF receptors in colorectal HCT116 cells. Additionally, LF-CMD@CAP-EGA-NCs demonstrated excellent biocompatibility, as observed in the FHC-CRL-1831 cell line. In conclusion, LF-CMD@CAP-EGA-NCs can be considered as a promising approach for targeted delivery of CAP and other anticancer agents in colorectal cancer treatment.

Quality-by-design based fabrication of febuxostat-loaded nanoemulsion: Statistical optimization, characterizations, permeability, and bioavailability studies.

The present work deals with QbD-based development of FEB-loaded nanoemulsion (FEB-NE) in order to enhance bioavailability and permeability. In the beginning, the risk assessment was performed on different experimental variables using the Ishikawa diagram followed by FMEA study in order to find critical process parameter (CPP) and critical material attributes (CMAs). To build quality in nanoemulsion, the quality target product profiles (QTPP) and critical quality attributes (CQAs) were determined. The different batches of FEB-NE were produced by the microemulsification-probe sonication method. Effect of varying levels of independent variables such as oil concentration (X1), Smix concentration (X3), and amplitude (X3) on responses such as globule size (Y1), zeta potential (Y2), and entrapment efficiency (Y3) were studied using Box-Behnken design (BDD). FEB-NE formulation was optimized using a graphical and numerical method. The optimized formulation concentrations and their responses (CQAs) were located as design space in an overlay plot. The spherical shapes of globules were visualized by surface morphology using AFM and TEM. In vitro dissolution study showed 93.32% drug release from the optimized FEB-NE formulation. The drug release mechanism followed by the formulation was the Higuchi-matrix kinetics with a regression coefficient of 0.9236 (R2). FEB-NE showed enhanced permeability using PAMPA (artificial non-cell membrane) and everted gut sac model method. The developed optimized FEB-NE exhibited the enhancement of bioavailability by 2.48 fold as compared to FEB-suspension using Wistar rats suggesting improvement of solubility of a lipophilic drug. The optimized batch remained stable for 90 days at 4 °C and 25 °C. Thus, QbD-based development of FEB-NE can be useful for a better perspective on a commercial scale.

Formulation, optimization, and in-vitro-ex-vivo evaluation of dual-crosslinked zinc pectinate-neem gum-interpenetrating polymer network mediated lansoprazole loaded floating microbeads.

Low methoxy pectin (LM pectin) suffers from burst release owing to its high swellability and solubility in water. Consequently, in ways to design an ideal drug delivery system, these obstacles must be surmounted. Therefore, the work aimed to design dual crosslinked LM pectin -neem gum (NG) mediated interpenetrating polymer network (IPN) floating mucoadhesive microbeads for lansoprazole (LNZ) gastro-retentive delivery. In short, LNZ-loaded floating microbeads were achieved by using the ionic gelation method wherein zinc acetate was preferred as a crosslinking agent. The optimization of IPN microbeads was performed employing a 32factorial design wherein concentration of pectin and NG was considered as independent factors whereas dependant factors are entrapment efficiency and drug release. Importantly, carboxylic functionality of low methoxy (LM) pectin and hydroxylic functionality NG cross-linked with Zn+2 forms a 3D network. Diffractogram and thermogram revealed that conversion of drug from crystalline to amorphous form because of entrapment of drug within polymeric network. Anticipated floating microbeads showed that polymer concentration had considerable effect on drug encapsulation efficiency and drug release. Briefly, optimizing floating microbeads (Batch B:5) showed maximum drug entrapment (87.47 %) with a delayed drug release (69.20 %, at 8 h) due to formation of strong IPN. Moreover, it showed good mucoadhesive aptitude with goat stomach mucosa because of entanglement between gum and mucus layer. In addition, use of calcium silicate assists to modulate floating profile of IPN microbeads. Therefore, designing dual crosslinked zinc-pectinate-NG mediated IPN floating mucoadhesive microbeads will offer a new substitute for floating delivery.

Discovery and Anticancer Activity of Novel 1,3,4-Thiadiazole- and Aziridine-Based Indolin-2-ones via In Silico Design Followed by Supramolecular Green Synthesis.

Three crucial anticancer scaffolds, namely indolin-2-one, 1,3,4-thiadiazole, and aziridine, are explored to synthesize virtually screened target molecules based on the c-KIT kinase protein. The stem cell factor receptor c-KIT was selected as target because most U.S. FDA-approved receptor tyrosine kinase inhibitors bearing the indolin-2-one scaffold profoundly inhibit c-KIT. Molecular hybrids of indolin-2-one with 1,3,4-thiadiazole (IIIa-m) and aziridine (VIa and VIc) were afforded through a modified Schiff base green synthesis using ß-cyclodextrin-SO3H in water as a recyclable proton-donor catalyst. A computational study found that indolin-2,3-dione forms a supramolecular inclusion complex with ß-cyclodextrin-SO3H through noncovalent interactions. A molecular docking study of all the synthesized compounds was executed on the c-KIT kinase domain, and most compounds displayed binding affinities similar to that of Sunitinib. On the basis of the pharmacokinetic significance of the aryl thioether linkage in small molecules, 1,3,4-thiadiazole hybrids (IIIa-m) were extended to a new series of 3-((5-(phenylthio)-1,3,4-thiadiazol-2-yl)imino)indolin-2-ones (IVa-m) via thioetherification using bis(triphenylphosphine)palladium(II)dichloride as the catalyst for C-S bond formation. Target compounds were tested against NCI-60 human cancer cell lines for a single-dose concentration. Among all three series of indolin-2-ones, the majority of compounds demonstrated broad-spectrum activity toward various cancer cell lines. Compounds IVc and VIc were further evaluated for a five-dose anticancer study. Compound IVc showed a potent activity of IC50 = 1.47 µM against a panel of breast cancer cell lines, whereas compound VIc exhibited the highest inhibition for a panel of colon cancer cell lines at IC50 = 1.40 µM. In silico ADME property descriptors of all the target molecules are in an acceptable range. Machine learning algorithms were used to examine the metabolites and phase I and II regioselectivities of compounds IVc and VIc, and the results suggested that these two compounds could be potential leads for the treatment of cancer.

Quantification and Validation of Stability-Indicating RP-HPLC Method for Efavirenz in Bulk and Tablet Dosage Form using Quality by Design (QbD): A Shifting Paradigm.

The present study endeavors quality by design (QbD) assisted chromatographic method for the quantification of Efavirenz (ERZ) in bulk and tablet dosage form. Analytical QbD instigated with assignment of analytical target profile (ATP) and critical analytical attributes (CAAs). Risk assessment studies and factor screening studies facilitate to identify the critical method parameters (CMPs). Optimization was performed by employing 32 full factorial design using identified CMPs i.e., flow rate (X1) and pH of buffer (X2) at three different levels and evaluating selected CAAs i.e., retention time (Y1) and peak area (Y2). The individual and interactive influence of CMPs on CAAs were tested by statistical data and response surface plots. Analysis of variance (ANOVA) confirmed that method parameters are significant (P < 0.05). Chromatographic separation was achieved using methanol, 10 mM ammonium acetate buffer (70:30 v/v), pH adjusted at 3.1 with 0.05% ortho-phosphoric acid as a mobile phase at flow rate 1.0 mL/min, and a Nucleosil C18 (4.6 mm I.D. × 250 mm, 5 µm) column with UV detection at 247 nm. The method validation and subsequent stresses degradation studies according to ICH guidelines supported the method to be highly efficient for regular drug analysis and its degradation products. The proposed method was successfully demonstrated QbD based approach for the development of highly sensitive, reliable and suitable for routine analysis, and clinical applications.

Development of ritonavir-loaded nanostructured lipid carriers employing quality by design (QbD) as a tool: characterizations, permeability, and bioavailability studies.

The objective of the present work was to optimize ritonavir (RTV)-loaded nanostructured lipid carriers (NLCs) to improve bioavailability using a quality by design (QbD)-based technique. Risk assessment was studied using "cause and effect" diagram followed by failure mode effect analysis (FMEA) to identify the effective high-risk variables for the formulation development. Quality target product profile (QTPP) and critical quality attributes (CQAs) were initially assigned for the proposed product. Central composite rotatable design (CCRD) was used to identify the individual and combined interactions of formulation variables. RTV-loaded NLC (RTV-NLC) was prepared using emulsification-ultrasonication method. The effect of formulation variables like ultrasound amplitude, lipid concentration, surfactant concentration on their responses like particle size, polydispersity index (PDI), and entrapment efficiency (EE) were studied by CCRD. The optimized formulation was subjected to lyophilization to obtain dry NLCs for solid-state analysis. DSC and PXRD investigations showed that RTV was molecularly dispersed in lipid matrix indicating amorphous form present in the formulation. FESEM and AFM depicted the spherical and uniform particles. The increase in solubility and dissolution rate is expected to be related to the molecular dispersion, amorphous state, of the drug in the nanoparticle. The optimized NLCs showed good physical stability during storage for 6 months. RTV-NLC was further subjected to in vitro studies and found a successful sustained release rate of 92.37 ± 1.03%. The parallel artificial membrane permeability assay (PAMPA) and everted gut sac model have demonstrated the permeation enhancement of RTV. In vivo study observed the enhanced bioavailability with 2.86-fold suggesting optimized NLC successfully overcome the issue of solubility.

Quality by design (QbD)-based fabrication of atazanavir-loaded nanostructured lipid carriers for lymph targeting: bioavailability enhancement using chylomicron flow block model and toxicity studies.

Atazanavir (ATV) is widely used as anti-HIV agent having poor aqueous solubility needs to modulate novel drug delivery system to enhance therapeutic efficiency and safety. The main objective of the present work was to fabricate ATV-loaded nanostructured lipid carriers (NLCs) employing quality by design (QbD) approach to address the challenges of bioavailability and their safety after oral administration. Herein, the main objective was to identify the influencing variables for the production of quality products. Considering this objective, quality target product profile (QTPP) was assigned and a systematic risk assessment study was performed to identify the critical material attributes (CMAs) and critical process parameter (CPP) having an influence on critical quality attributes (CQAs). Lipid concentrations, surfactant concentrations, and pressure of high-pressure homogenizer were identified as CMAs and CPP. ATV-NLCs were prepared by emulsification-high pressure homogenization method and further lyophilized to obtain solid-state NLCs. The effect of formulation variables (CMAs and CPP) on responses like particle size (Y1), polydispersity index (Y2), and zeta potential (Y3) was observed by central composite rotatable design (CCRD). The data were statistically evaluated by ANOVA for confirmation of a significant level (p < 0.05). The optimal conditions of NLCs were obtained by generating design space and desirability value. The lyophilized ATV-NLCs were characterized by DSC, powder X-ray diffraction, and FT-IR analysis. The morphology of NLCs was revealed by TEM and FESEM. In vitro study suggested a sustained release pattern of drug (92.37 ± 1.03%) with a mechanism of Korsmeyer-Peppas model (r2 = 0.925, and n = 0.63). In vivo evaluation in Wistar rats showed significantly higher (p < 0.001) plasma drug concentration of ATV-NLCs as compared to ATV-suspension using chylomicron flow block model. The relative bioavailability of ATV-NLCs was obtained to be 2.54 folds. Thus, a safe and promising drug targeting system was successfully developed to improve bioavailability and avoiding first-pass effect ensures to circumvent the acute-toxicity of liver.

2D, 3D-QSAR and docking studies of 1,2,3-thiadiazole thioacetanilides analogues as potent HIV-1 non-nucleoside reverse transcriptase inhibitors.

BACKGROUND: The discovery of clinically relevant inhibitors of HIV-RT for antiviral therapy has proven to be a challenging task. To identify novel and potent HIV-RT inhibitors, the quantitative structure-activity relationship (QSAR) approach became very useful and largely widespread technique forligand-based drug design. METHODS: We perform the two- and three-dimensional (2D and 3D) QSAR studies of a series of 1,2,3-thiadiazole thioacetanilides analogues to elucidate the structural properties required for HIV-RT inhibitory activity. RESULTS: The 2D-QSAR studies were performed using multiple linear regression method, giving r2 = 0.97 and q2 = 0.94. The 3D-QSAR studies were performed using the stepwise variable selection k-nearest neighbor molecular field analysis approach; a leave-one-out cross-validated correlation coefficient q2 = 0.89 and a non-cross-validated correlation coefficient r2 = 0.97 were obtained. Docking analysis suggests that the new series have comparable binding affinity with the standard compounds. CONCLUSIONS: This approach showed that hydrophobic and electrostatic effects dominantly determine binding affinities which will further useful for development of new NNRTIs.

QSAR, docking studies and pharmacophore identification of phenylmethyl phenoxy propyl amino propanoic acid derivatives as leukotriene A4 hydrolase inhibitors.

The enzyme leukotriene A4 (LTA4) plays an important role as precursor of slow reactive substances as LTC4, LTD4, and LTE4. It is an attractive target for molecular modeling and QSAR study. Our effort is mainly focused on exploring the SAR for inhibitors of the LTA4 hydrolase through docking study, pharmacophore modeling and molecular descriptor study. The binding of these small molecules on LTA4 hydrolase enzyme was described by the models developed on 2D molecular descriptors, with good predictive power (39 compounds, 6 descriptors, r2 0.98, SEE 0.167, F-value 268.53, q2 0.90, r2 adj 0.97, P-value < 0.0001, SD of residuals 0.15). Docking studies were employed to presume the probable binding conformation of these analogues and exploring the SAR for the compounds. The novel pharmacophore represents the ligand features that are involved in interactions with the target protein, as well as the space around the ligand occupied by the protein. The efforts are aimed to discover the SAR for the inhibitors of LTA4 hydrolase through techniques of QSAR, docking and pharmacophore.