Removal of hazardous micropollutants from treated wastewater using cyclodextrin bead polymer - A pilot demonstration case.

Increasing amount of micropollutants such as drugs, cosmetics and nutritional supplements detected in surface waters represents increasing risk to humans and to the whole environment. These hazardous materials deriving mostly from wastewaters often cannot be effectively removed by conventional water treatment technologies due to their persistence. Some of the innovative technologies use specific sorbents for their removal. Cyclodextrin-based sorbents have already proved to be efficient in laboratory-scale experiments, but no pilot-plant scale demonstration has been performed so far. We are the first who applied this sorption-technology as a tertiary treatment in a pilot-plant scale operating, biomachine-type municipal wastewater treatment plant. As a result of the treatment 7 of 9 typical micropollutants (estradiol, ethinyl estradiol, estriol, diclofenac, ibuprofen, bisphenol A and cholesterol) were removed with >80% efficiency from effluent (reducing their concentration from ∼5 µg/L to <0.001-1 µg/L). GC-MS analysis of water samples showed that many of the micropollutants were removed from the water within a short time, demonstrating the high potential of the applied cyclodextrin-based sorbent in micropollutant removal. The effect-based testing also confirmed the efficiency. There was a correlation between sorption efficacies and binding constants of micropollutant/cyclodextrin inclusion complexes, showing that among others also inclusion complex formation of pollutants with cyclodextrin played important role in sorption mechanism.

Reprint of "Characterization of cyclodextrin containing nanofilters for removal of pharmaceutical residues".

Due to the increasing amount of persistent organic pollutants (POPs) in general and pharmaceutical residues in particular in municipal wastewater, the efficiency of water treatment technologies should be improved. Following the biological treatment of wastewater nanofiltration offers a possible way for the removal of POPs. In this study ß-cyclodextrin containing nanofilters having different chemical composition and thickness (1.5-3.5 mm) were investigated. For their characterization, their adsorption capacity was determined applying ibuprofen containing model solution and total organic carbon (TOC) analyzer. It could be established that the regeneration of nanofilters with ethanol and the application of inorganic additives (NaCl, NaHCO3, NH4HCO3) increased the adsorption capacity of nanofilters. The best results were achieved with chemical composition of 30 m/m% ß-cyclodextrin polymer beads and 70 m/m% ultra-high molecular weight polyethylene in the presence of 1 2mmol ammonium hydrogen carbonate/nanofilter.

Characterization of cyclodextrin containing nanofilters for removal of pharmaceutical residues.

Due to the increasing amount of persistent organic pollutants (POPs) in general and pharmaceutical residues in particular in municipal wastewater, the efficiency of water treatment technologies should be improved. Following the biological treatment of wastewater nanofiltration offers a possible way for the removal of POPs. In this study ß-cyclodextrin containing nanofilters having different chemical composition and thickness (1.5-3.5mm) were investigated. For their characterization, their adsorption capacity was determined applying ibuprofen containing model solution and total organic carbon (TOC) analyzer. It could be established that the regeneration of nanofilters with ethanol and the application of inorganic additives (NaCl, NaHCO3, NH4HCO3) increased the adsorption capacity of nanofilters. The best results were achieved with chemical composition of 30m/m% ß-cyclodextrin polymer beads and 70m/m% ultra-high molecular weight polyethylene in the presence of 12mmol ammonium hydrogen carbonate/nanofilter.

Vertical physico-chemical gradients with distinct microbial communities in the hypersaline and heliothermal Lake Ursu (Sovata, Romania).

The effect of vertical physico-chemical stratification on the planktonic microbial community composition of the deep, hypersaline and heliothermal Lake Ursu (Sovata, Romania) was examined in this study. On site and laboratory measurements were performed to determine the physical and chemical variables of the lake water, and culture-based and cultivation-independent techniques were applied to identify the members of microbial communities. The surface of the lake was characterized by a low salinity water layer while the deepest region was extremely saline (up to 300 g/L salinity). Many parameters (e.g. photosynthetically active radiation, dissolved oxygen concentration, pH, redox potential) changed dramatically from 2 to 4 m below the water surface in conjunction with the increasing salinity values. The water temperature reached a maximum at this depth. At around 3 m depth, there was a water layer with high (bacterio) chlorophyll content dominated by Prosthecochloris vibrioformis, a phototrophic green sulfur bacterium. Characteristic microbial communities with various prokaryotic taxa were identified along the different environmental parameters present in the different water layers. Some of these bacteria were known to be heterotrophic and therefore may be involved in the decomposition of lake organic material (e.g. Halomonas, Idiomarina and Pseudoalteromonas) while others in the transformation of sulfur compounds (e.g. Prosthecochloris). Eukaryotic microorganisms identified by molecular methods in the lake water belonged to genera of green algae (Mantionella and Picochlorum), and were restricted mainly to the upper layers.

Ferrate treatment for inactivation of bacterial community in municipal secondary effluent.

This paper demonstrates the effect of ferrate [Fe(VI)-compound], an environmental friendly multi-purpose reagent, in municipal secondary effluent treatment. The purpose was to study the inactivation capability of ferrate and for the first time to compare the effect and efficiency of Fe(VI) with the widely used disinfectant, chlorine gas on the indigenous bacterial community in the case of secondary effluents. The most probable number technique (MPN) was applied for the determination of cultivable heterotrophic bacterial abundance and terminal restriction fragment length polymorphism (T-RFLP) analysis for comparing bacterial communities. The study demonstrated that (i) ferrate and chlorine had different effect on the total bacterial community of secondary effluents, (ii) low ferrate dose [5 mg L(-1) Fe(VI)] was sufficient for >99.9% reduction of indigenous bacteria, and (iii) a similar dosage was also effective in the inactivation of chlorine-resistant bacteria.

Polyphasic bacterial community analysis of an aerobic activated sludge removing phenols and thiocyanate from coke plant effluent.

Biological purification processes are effective tools in the treatment of hazardous wastes such as toxic compounds produced in coal coking. In this study, the microbial community of a lab-scale activated sludge system treating coking effluent was assessed by cultivation-based (strain isolation and identification, biodegradation tests) and culture-independent techniques (sequence-aided T-RFLP, taxon-specific PCR). The results of the applied polyphasic approach showed a simple microbial community dominated by easily culturable heterotrophic bacteria. Comamonas badia was identified as the key microbe of the system, since it was the predominant member of the bacterial community, and its phenol degradation capacity was also proved. Metabolism of phenol, even at elevated concentrations (up to 1500mg/L), was also presented for many other dominant (Pseudomonas, Rhodanobacter, Oligella) and minor (Alcaligenes, Castellaniella, Microbacterium) groups, while some activated sludge bacteria (Sphingomonas, Rhodopseudomonas) did not tolerate it even in lower concentrations (250mg/L). In some cases, closely related strains showed different tolerance and degradation properties. Members of the genus Thiobacillus were detected in the activated sludge, and were supposedly responsible for the intensive thiocyanate biodegradation observed in the system. Additionally, some identified bacteria (e.g. C. badia and the Ottowia-related strains) might also have had a significant impact on the structure of the activated sludge due to their floc-forming abilities.

Operation control of anaerobic digesters on the basis of enzyme activity tests.

In our experimental work the pilot plant and full scale anaerobic bioreactors of a communal sewage treatment plant were tested by applying usual control parameters (pH, volatile acid content, alkalinity, gas composition), and enzyme activity (dehydrogenase, protease, lipase) measurements. Influence of temperature change was examined in pilot plant scale, while the effect of alteration in specific organic matter load both in pilot and full scale. Among the control parameters only the change of the volatile acid concentration reflected the occurred influences. During the temperature varying experimental phase the dehydrogenase enzyme activity excellently indicated the influence of the different conditions. The effect of altering substrate load onto the gas production was also well followed by the enzyme activity data (mainly protease, lipase), and more rapidly than by measuring volatile acid concentration. In practice it is expedient to use enzyme activity measurements in those cases, when changes in the substrate composition and load are frequent. Another advantage of these tests is that they can be carried out quickly and at a relative low cost.