ABSTRACT
An electronic meter to measure surface seawater density is presented. It is based on the measurement of the difference in displacements of a surface level probe and a weighted float, which according to Archimedes' law depends on the density of the water. The displacements are simultaneously measured using a high-accuracy magnetostrictive sensor, to which a custom electronic board provides a wireless connection and power supply so that it can become part of a wireless sensor network. The electronics are designed so that different kinds of wireless networks can be used, by simply changing the wireless module and the relevant firmware of the microcontroller. Lastly, laboratory and at-sea tests are presented and discussed in order to highlight the functionality and the performance of a prototype of the wireless density meter node in a Bluetooth radio network. The experimental results show a good agreement of the values of the calculated density compared to reference hydrometer readings.
Subject(s)
Seawater/analysis , Wireless Technology , Algorithms , Electronics , Wireless Technology/instrumentationABSTRACT
We experimentally investigate the benefits of a new optical pulse coding technique for long-range, meter and submeter scale Raman-based distributed temperature sensing on standard single-mode optical fibers. The proposed scheme combines a low-repetition-rate quasi-periodic pulse coding technique with the use of standard high-power fiber lasers operating at 1550 nm, allowing for what we believe is the first long-range distributed temperature measurement over single-mode fibers (SMFs). We have achieved 1 m spatial resolution over 26 km of SMF, attaining 3°C temperature resolution within 30 s measurement time.
