Use of coir pith particles in composites with Portland cement.

Brazil is the fourth largest world's producer of coconut (Cocos nucifera L.). Coconut crops generate several wastes, including, coir pith. Coir pith and short fibers are the byproducts of extracting the long fibers and account for approximately 70% of the mature coconut husk. The main use of coir pith is as an agricultural substrate. Due to its shape and small size (0.075-1.2 mm), this material can be considered as a particulate material. The aim of this study was to evaluate the use of coir pith as an aggregate in cementitious composites and to evaluate the effect of the presence of sand in the performance of these composites. Some composites were produced exclusively with coir pith particles and other composites with coir pith partially substituting the natural sand. The cementitious composites developed were tested for their physical and mechanical properties and characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy to evaluate the effect of coir pith particles addition in cement paste and sand-cement-mortar. The statistical significance of the results was evaluated by one-way analysis of variance (ANOVA) test followed by multiple comparisons of the means by Tukey's test that showed that the composites with coir pith particles, with or without natural sand, had similar mechanical results, i.e., means were not statistically different at 5% significance level. There was a reduction in bulk density and an improved post-cracking behavior in the composites with coir pith particles compared to conventional mortar and to cement paste. These composites can be used for the production of lightweight, nonstructural building materials, according to the values of compressive strength (3.97-4.35 MPa) and low bulk density (0.99-1.26 g/cm(3)).

Conductive carbon-clay nanocomposites from petroleum oily sludge.

Oily sludge samples formed in water-oil separation tanks from a petroleum industry were collected, characterized and heat-treated at different temperatures, in order to yield carbon-clay composites. EDX microanalysis, XRD and FTIR data revealed that before carbonization the oily sludge was formed mainly by a mixture of quartz, montmorillonite, calcite, barite and oil residues. After carbonization, mineral phases present were mainly quartz, anorthite and gehlenite, in addition to graphitic and disordered carbon domains, according to XRD, Raman and TEM measurements. A preliminary evaluation of the electrical conductivity performed by Impedance Spectroscopy revealed that the composites formed are conductive, exhibiting conductivity values typical of semiconductors, in contrast to the precursor material.

Characterization, phase solubility and molecular modeling of alpha-cyclodextrin/pyrimethamine inclusion complex.

An inclusion complex between the dihydrofolate reductase inhibitor pyrimethamine (PYR) and alpha-cyclodextrin (alpha-CD) was prepared and characterized. From the phase-solubility diagram, a linear increase of PYR solubility was verified as a function of alpha-CD concentration, suggesting the formation of a soluble complex. A 1:1 host-guest stoichiometry can be proposed according to the Job's plot, obtained from the difference of PYR fluorescence intensity in the presence and absence of alpha-CD. Differential scanning calorimetry (DSC) measurements provided additional evidences of complexation such as the absence of the endothermic peak assigned to the melting of the drug. The inclusion mode characterized by two-dimensional (1)H NMR spectroscopy (ROESY) involves penetration of the p-chlorophenyl ring into the alpha-CD cavity, in agreement to the orientation optimized by molecular modeling methods.

Sulfadiazine/hydroxypropyl-beta-cyclodextrin host-guest system: Characterization, phase-solubility and molecular modeling.

In this work we prepared and characterized an inclusion complex of the dihydropteroate synthase inhibitor sulfadiazine (SDZ) in 2-hydroxypropyl-beta-cyclodextrin (HPBCD). From the phase-solubility diagram we observed an increase in the water solubility of the drug, calculating a binding constant of 1879M(-1). The inclusion mode involves a NH(2)-in orientation of the drug in the HPBCD cavity, according to the 2D NMR (ROESY) data and confirmed by molecular modeling using the semiempirical PM6 and RM1 methods.

Inclusion complexes of pyrimethamine in 2-hydroxypropyl-beta-cyclodextrin: characterization, phase solubility and molecular modelling.

The inclusion complexation of pyrimethamine in 2-hydroxypropyl-beta-cyclodextrin has been investigated by 2D (1)H NMR, FTIR and UV/visible spectroscopy and also by molecular modelling methods (AM1, PM3, MM3). From the phase-solubility diagram a linear increase was observed in pyrimethamine aqueous solubility in the presence of 2-hydroxypropyl-beta-cyclodextrin, evidencing the formation of a soluble inclusion complex. According to the continuous variation method (Job's plot) applied to fluorescence measurements, a 1:1 stoichiometry has been proposed for the complex. Concerning the structure of the complex, a Cl-in orientation of pyrimethamine in the 2-hydroxypropyl-beta-cyclodextrin cavity has been proposed from the theoretical calculations, being confirmed by two-dimensional (1)H NMR spectroscopy (ROESY). The thermal behaviour has also been studied, providing complementary evidences of complex formation.

Kinetic and calorimetric study of the adsorption of dyes on mesoporous activated carbon prepared from coconut coir dust.

Mesoporous activated carbon has been prepared from coconut coir dust as support for adsorption of some model dye molecules from aqueous solutions. The methylene blue (MB) and remazol yellow (RY) molecules were chosen for study of the adsorption capacity of cationic and anionic dyes onto prepared activated carbon. The adsorption kinetics was studied with the Lagergren first- and pseudo-second-order kinetic models as well as the intraparticle diffusion model. The results for both dyes suggested a multimechanism sorption process. The adsorption mechanisms in the systems dyes/AC follow pseudo-second-order kinetics with a significant contribution of intraparticle diffusion. The samples simultaneously present acidic and basic sites able to act as anchoring sites for basic and acidic dyes, respectively. Calorimetric studies reveal that dyes/AC interaction forces are correlated with the pH of the solution, which can be related to the charge distribution on the AC surface. These AC samples also exhibited very short equilibrium times for the adsorption of both dyes, which is an economically favorable requisite for the activated carbon described in this work, in addition to the local abundance of the raw material.