Effect of Post-Space Irrigation with NaOCl And CaOCl at Different Concentrations on the Bond Strength of Posts Cemented with a Self-Adhesive Resin Cement.

The aim of this study was to evaluate the effect of post-space irrigation with NaOCl and CaOCl at different concentrations on the bond strength of posts cemented with a self-adhesive resin cement. Eighty premolars were sectioned 14 mm from the apex, and endodontically treated. The root canal filling was partially removed. Specimens were randomly assigned into 8 groups (n=10), according to the irrigant for post-space irrigation: SS - 0.9% saline solution (control group); CHX - 2% chlorhexidine; 1% NaOCl - 1% sodium hypochlorite; 2.5% NaOCl - 2.5% sodium hypochlorite; 5% NaOCl - 5% sodium hypochlorite; 1% CaOCl - 1% calcium hypochlorite; 2.5% CaOCl - 2.5% calcium hypochlorite; and 5% CaOCl - 5% calcium hypochlorite. For each group, irrigation was performed continuously with 2 ml of solution. The post-spaces were dried with paper points (#80), and glass fiber posts were cemented using a self-adhesive resin cement. The specimens were sectioned perpendicularly and the push-out test was performed. Optical microscopy was used to analyze the failure mode. ANOVA and Bonferroni tests analyzed the bond strength data. NaOCl and CaOCl presented similar bond strength regardless the concentration used to irrigate the post-space (p>0.05). SS showed the highest bond strength (11.47 MPa) (p<0.05). Adhesive failures at the cement/dentin interface were predominant (58.33%). Saline solution should be irrigant of choice to irrigate the post-space before fiber post cementation with self-adhesive resin cement. NaOCl and CaOCl negatively affect the bond strength values.

Effect of post-space irrigation with naocl and caocl at different concentrations on the bond strength of posts cemented with a self-adhesive resin cement

Abstract The aim of this study was to evaluate the effect of post-space irrigation with NaOCl and CaOCl at different concentrations on the bond strength of posts cemented with a self-adhesive resin cement. Eighty premolars were sectioned 14 mm from the apex, and endodontically treated. The root canal filling was partially removed. Specimens were randomly assigned into 8 groups (n=10), according to the irrigant for post-space irrigation: SS - 0.9% saline solution (control group); CHX - 2% chlorhexidine; 1% NaOCl - 1% sodium hypochlorite; 2.5% NaOCl - 2.5% sodium hypochlorite; 5% NaOCl - 5% sodium hypochlorite; 1% CaOCl - 1% calcium hypochlorite; 2.5% CaOCl - 2.5% calcium hypochlorite; and 5% CaOCl - 5% calcium hypochlorite. For each group, irrigation was performed continuously with 2 ml of solution. The post-spaces were dried with paper points (#80), and glass fiber posts were cemented using a self-adhesive resin cement. The specimens were sectioned perpendicularly and the push-out test was performed. Optical microscopy was used to analyze the failure mode. ANOVA and Bonferroni tests analyzed the bond strength data. NaOCl and CaOCl presented similar bond strength regardless the concentration used to irrigate the post-space (p>0.05). SS showed the highest bond strength (11.47 MPa) (p<0.05). Adhesive failures at the cement/dentin interface were predominant (58.33%). Saline solution should be irrigant of choice to irrigate the post-space before fiber post cementation with self-adhesive resin cement. NaOCl and CaOCl negatively affect the bond strength values.

Resumo O objetivo deste estudo foi avaliar o efeito da irrigação do espaço preparado para o pino com NaOCl e CaOCl em diferentes concentrações na resistência adesiva de pinos cimentados com um cimento resinoso autoadesivo. Oitenta pré-molares foram seccionados 14 mm do ápice e endodonticamente tratado. As obturações foram parcialmente removidas. Os espécimes divididos randomicamente em 8 grupos (n=10) de acordo com o irrigante usado para irrigação do espaço preparado para pino: SF - soro fisiológico 0,9% (grupo controle); CHX - clorexidina 2%; NaOCl 1% - hipoclorito de sódio 1%; NaOCl 2,5% - hipoclorito de sódio 2,5%; NaOCl 5% - hipoclorito de sódio 5%; CaOCl 1% - hipoclorito de cálcio 1%; CaOCl 2,5% - hipoclorito de cálcio 2,5%; CaOCl 5% - hipoclorito de cálcio 5%. Para cada grupo, irrigação foi realizada com 2 mL de solução. O espaço preparado para pino foi seco com cone de papel absorvente (#80) e os pinos de fibra foram cimentados com cimento resinoso autoadesivo. Os espécimes foram seccionados perpendicularmente e o teste de push-out foi realizado. Microscopia óptica foi usada para analisar o padrão de falha. Os testes de ANOVA e Bonferroni analisaram os dados de resistência adesiva. NaOCl e CaOCl apresentaram similar resistência adesiva, independentemente da concentração usada para irrigar o espaço preparado para pino (p>0,05). SF apresentou os maiores valores de resistência adesiva (11,47 MPa) (p<0,05). Falhas adesivas na interface cimento/dentina foram predominantes (58,33%). Soro fisiológico deve ser o irrigante de escolha para irrigar o espaço preparado para pino antes da cimentação de pinos de fibra com cimentos resinosos autoadesivos. NaOCl e CaOCl afetam negativamente os valores de resistência adesiva.

Efficacy of ultrasonic activation of NaOCl and orange oil in removing filling material from mesial canals of mandibular molars with and without isthmus

Objectives The aim of this study was to evaluate the volume of remaining filling material after passive ultrasonic irrigation (PUI) of sodium hypochlorite (NaOCl) and orange oil in mesial canals of mandibular molars, with and without isthmus. Material and Methods Thirty mesial roots of mandibular molars were divided according to the presence or absence of isthmus. Canals were prepared and filled (Micro-CT #1). Filling was removed using rotary instruments, and specimens were sub-divided into three groups according to the irrigation procedures: Conventional – conventional irrigation with NaOCl, PUI/NaOCl – PUI of NaOCl (three activations, 20 seconds each), and PUI/orange oil – PUI of orange oil (Micro-CT#2). Specimens were enlarged using the X2 and X3 ProTaper Next instruments and submitted to the same irrigation protocols (Micro-CT #3). Results No differences were found between the experimental groups in each stage of assessment (P>0.05). The volume of residual filling material was similar to that in Micro-CT #2 and Micro-CT #3, but lower than that observed in Micro-CT #1 (P<0.05). When groups were pooled according to the presence or absence of an isthmus, volume of residual filling material was higher in specimens presenting isthmus (P<0.05). Conclusions PUI of NaOCl or orange oil did not improve filling removal. Isthmus consists in an anatomical obstacle that impairs the removal of filling material.

Efficacy of ultrasonic activation of NaOCl and orange oil in removing filling material from mesial canals of mandibular molars with and without isthmus.

OBJECTIVES: The aim of this study was to evaluate the volume of remaining filling material after passive ultrasonic irrigation (PUI) of sodium hypochlorite (NaOCl) and orange oil in mesial canals of mandibular molars, with and without isthmus. MATERIAL AND METHODS: Thirty mesial roots of mandibular molars were divided according to the presence or absence of isthmus. Canals were prepared and filled (Micro-CT #1). Filling was removed using rotary instruments, and specimens were sub-divided into three groups according to the irrigation procedures: Conventional - conventional irrigation with NaOCl, PUI/NaOCl - PUI of NaOCl (three activations, 20 seconds each), and PUI/orange oil - PUI of orange oil (Micro-CT#2). Specimens were enlarged using the X2 and X3 ProTaper Next instruments and submitted to the same irrigation protocols (Micro-CT #3). RESULTS: No differences were found between the experimental groups in each stage of assessment (P>0.05). The volume of residual filling material was similar to that in Micro-CT #2 and Micro-CT #3, but lower than that observed in Micro-CT #1 (P<0.05). When groups were pooled according to the presence or absence of an isthmus, volume of residual filling material was higher in specimens presenting isthmus (P<0.05). CONCLUSIONS: PUI of NaOCl or orange oil did not improve filling removal. Isthmus consists in an anatomical obstacle that impairs the removal of filling material.

Abordagem endodôntica e periodontal de uma reabsorção radicular cervical externa: relato de caso / Endodontic and periodontal treatment of external cervical root resorption: a case report

A reabsorção radicular cervical externa (RCE) consiste na perda de tecido duro dentário como resultado da ação odontoclástica. Frequentemente, inicia-se na região cervical da superfície radicular e as lesões são diagnosticadas de maneira equivocada, sendo confundidas com lesões de cárie e reabsorção interna. Como resultado, corriqueiramente é realizado o tratamento inadequado. O diagnóstico precoce e uma abordagem adequada são as chaves para o sucesso do tratamento. A etiologia da RCE é principalmente o trauma, tratamento ortodôntico ou fatores idiopáticos. O objetivo do presente estudo é descrever o tratamento endodôntico, periodontal cirúrgico e restaurador de um caso de reabsorção radicular externa Classe III de Heithersay, o qual apresentava RCE no elemento 43, de natureza idiopática. O tratamento foi combinado, sendo, inicialmente, realizada a exposição cirúrgica do defeito reabsortivo, seguida pela remoção cirúrgica de todo tecido inflamatório de granulação presente e, por fim, o tratamento restaurador utilizando cimento de ionômero de vidro modificado por resina. Além disso, um tratamento endodôntico foi conduzido, devido ao diagnóstico de necrose pulpar. Após 12 meses de acompanhamento clínico e radiográfico, não foi observada recidiva da lesão reabsortiva.

Passive ultrasonic irrigation in calcium hydroxide removal from root canals: a sem/ eds analysis

AIM: The aim of this study was to evaluate the efficacy of different lengths of time of passive ultrasonic irrigation (PUI) in removing calcium hydroxide (CH) paste from root canal, using scanning electron microscopy and energy dispersive spectrometry (SEM/EDS). MATERIAL AND METHODS: Fifty-four human premolars were used. After coronal access, a size #15 K-file was used to obtain apical patency. Root canal preparation was performed using WaveOne 40.08 instruments. CH paste was placed into the root canal. Specimens were stored in a humid environment, and after seven days, they were divided into five groups (n=12) according to the irrigation protocols: Manual­ a size #40 K-file; PUI/1­ 1 min; PUI/2­ 2 min; PUI/3­ 3 min; and Control­ without CH paste. An elementary chemical microanalysis (SEM/EDS) was performed to quantify the presence of calcium on the dentinal walls. RESULTS: The percentage of calcium was higher in all experimental groups when compared to the control group (P < 0.05); but no differences among them were found (P > 0.05). CONCLUSION: The amount of calcium hydroxide paste on the dentinal walls was not dependent on length of time of ultrasonic activation. SEM/EDS analysis seems to be a reliable method to assess CH paste removal from the root canals.

Penetrability of AH plus and MTA fillapex after endodontic treatment and retreatment: a confocal laser scanning microscopy study.

The aim of the study was to assess the penetrability of two endodontic sealers (AH Plus and MTA Fillapex) into dentinal tubules, submitted to endodontic treatment and subsequently to endodontic retreatment. Thirty ex vivo incisors were prepared using ProTaper rotary system up to F3 instrument and divided in three groups according to the endodontic sealer used for root canal filling: AH Plus (AHP), MTA Fillapex (MTAF), and control group (CG) without using EDTA previously to the root canal filling. Rhodamine B dye (red) was incorporated to the sealers in order to provide the fluorescence which will enable confocal laser scanning microscopy (CLSM) assessment. All specimens were filled with gutta-percha cones using the lateral compaction technique. The specimens were submitted to endodontic retreatment using ProTaper Retreatment system, re-prepared up to F5 instruments and filled with gutta-percha cones and the same sealer used during endodontic retreatment. Fluorescein dye (green) was incorporated to the sealer in order to distinguish from the first filling. The roots were sectioned 2 mm from the apex and assessed by CLSM. No difference was found between the two experimental groups (P > 0.05). On the other hand, in the control group the sealers were not capable to penetrate into dentinal tubules after endodontic treatment (P > 0.05). In retreatment cases, none of the sealers were able to penetrate into dentin tubules. It can be concluded that sealer penetrability is high during endodontic treatment. However, MTA Fillapex and AH Plus do not penetrate into dentinal tubules after endodontic retreatment.

Wizard CD Plus and ProTaper Universal: analysis of apical transportation using new software.

OBJECTIVE: This study has two aims: 1) to evaluate the apical transportation of the Wizard CD Plus and ProTaper Universal after preparation of simulated root canals; 2) to compare, with Adobe Photoshop, the ability of a new software (Regeemy) in superposing and subtracting images. MATERIAL AND METHODS: Twenty five simulated root canals in acrylic-resin blocks (with 20º curvature) underwent cone beam computed tomography before and after preparation with the rotary systems (70 kVp, 4 mA, 10 s and with the 8×8 cm FoV selection). Canals were prepared up to F2 (ProTaper) and 24.04 (Wizard CD Plus) instruments and the working length was established to 15 mm. The tomographic images were imported into iCAT Vision software and CorelDraw for standardization. The superposition of pre- and post-instrumentation images from both systems was performed using Regeemy and Adobe Photoshop. The apical transportation was measured in millimetres using Image J. Five acrylic resin blocks were used to validate the superposition achieved by the software. Student's t-test for independent samples was used to evaluate the apical transportation achieved by the rotary systems using each software individually. Student's t-test for paired samples was used to compare the ability of each software in superposing and subtracting images from one rotary system per time. RESULTS: The values obtained with Regeemy and Adobe Photoshop were similar to rotary systems (P>0.05). ProTaper Universal and Wizard CD Plus promoted similar apical transportation regardless of the software used for image's superposition and subtraction (P>0.05). CONCLUSION: Wizard CD Plus and ProTaper Universal promoted little apical transportation. Regeemy consists in a feasible software to superpose and subtract images and appears to be an alternative to Adobe Photoshop.

Wizard CD Plus and ProTaper Universal: analysis of apical transportation using new software

OBJECTIVE: This study has two aims: 1) to evaluate the apical transportation of the Wizard CD Plus and ProTaper Universal after preparation of simulated root canals; 2) to compare, with Adobe Photoshop, the ability of a new software (Regeemy) in superposing and subtracting images. MATERIAL AND METHODS: Twenty five simulated root canals in acrylic-resin blocks (with 20º curvature) underwent cone beam computed tomography before and after preparation with the rotary systems (70 kVp, 4 mA, 10 s and with the 8×8 cm FoV selection). Canals were prepared up to F2 (ProTaper) and 24.04 (Wizard CD Plus) instruments and the working length was established to 15 mm. The tomographic images were imported into iCAT Vision software and CorelDraw for standardization. The superposition of pre- and post-instrumentation images from both systems was performed using Regeemy and Adobe Photoshop. The apical transportation was measured in millimetres using Image J. Five acrylic resin blocks were used to validate the superposition achieved by the software. Student's t-test for independent samples was used to evaluate the apical transportation achieved by the rotary systems using each software individually. Student's t-test for paired samples was used to compare the ability of each software in superposing and subtracting images from one rotary system per time. RESULTS: The values obtained with Regeemy and Adobe Photoshop were similar to rotary systems (P>0.05). ProTaper Universal and Wizard CD Plus promoted similar apical transportation regardless of the software used for image's superposition and subtraction (P>0.05). CONCLUSION: Wizard CD Plus and ProTaper Universal promoted little apical transportation. Regeemy consists in a feasible software to superpose and subtract images and appears to be an alternative to Adobe Photoshop. .

Influence of endodontic sealer composition and time of fiber post cementation on sealer adhesiveness to bovine root dentin.

This study aimed to assess the influence of the type of endodontic sealer (salicylate resin-based sealer vs. two endodontic sealers) and the time of fiber post cementation after root filling on the post adhesion to bovine root dentin. Sixty bovine roots were assigned to six groups (n=10), considering an experimental design with two factors (factorial 3x2): endodontic sealer factor in three levels [epoxy resin-based sealer (AH Plus), eugenol-based sealer (Endofill), and salicylate resin-based sealer plus mineral trioxide aggregate - MTA (MTA Fillapex)] and time for post cementation factor in two levels (immediate post cementation or 15 days after root canal filling). After post cementation, 2-mm-thick slices were produced and submitted to push-out test. The failure modes were analyzed under a 40× stereomicroscope and scored as: adhesive at cement/dentin interface; adhesive at cement/post interface; cement cohesive; post cohesive; dentin cohesive; or mixed. Data were analyzed using two-way ANOVA and Tukey's post-hoc tests (α=0.05). When the fiber posts were cemented immediately after the root canal filling, the bond strengths were similar, independent of the endodontic sealer type. However, after 15 days, the epoxy resin-based sealer presented higher bond strength than the other sealers (p<0.05). Comparison between each sealer in different experimental times did not reveal any differences. The main failure type was adhesive at dentin/cement interface (89.4%). The time elapsed between the root canal filling and post cementation has no influence on post/root dentin adhesion. On the contrary, the type of endodontic sealer can influence the adhesion between fiber posts and root dentin.

Influence of Endodontic Sealer Composition and Time of Fiber Post Cementation on Sealer Adhesiveness to Bovine Root Dentin

This study aimed to assess the influence of the type of endodontic sealer (salicylate resin-based sealer vs. two endodontic sealers) and the time of fiber post cementation after root filling on the post adhesion to bovine root dentin. Sixty bovine roots were assigned to six groups (n=10), considering an experimental design with two factors (factorial 3x2): endodontic sealer factor in three levels [epoxy resin-based sealer (AH Plus), eugenol-based sealer (Endofill), and salicylate resin-based sealer plus mineral trioxide aggregate - MTA (MTA Fillapex)] and time for post cementation factor in two levels (immediate post cementation or 15 days after root canal filling). After post cementation, 2-mm-thick slices were produced and submitted to push-out test. The failure modes were analyzed under a 40× stereomicroscope and scored as: adhesive at cement/dentin interface; adhesive at cement/post interface; cement cohesive; post cohesive; dentin cohesive; or mixed. Data were analyzed using two-way ANOVA and Tukey's post-hoc tests (α=0.05). When the fiber posts were cemented immediately after the root canal filling, the bond strengths were similar, independent of the endodontic sealer type. However, after 15 days, the epoxy resin-based sealer presented higher bond strength than the other sealers (p<0.05). Comparison between each sealer in different experimental times did not reveal any differences. The main failure type was adhesive at dentin/cement interface (89.4%). The time elapsed between the root canal filling and post cementation has no influence on post/root dentin adhesion. On the contrary, the type of endodontic sealer can influence the adhesion between fiber posts and root dentin.

Este estudo objetivou avaliar a influência do tipo de cimento endodôntico (um cimento à base de resina de salicilato e dois cimentos endodônticos) e do tempo decorrido entre a obturação do conduto e a cimentação do pino de fibra na adesão de pinos de fibra à dentina radicular bovina. Sessenta dentes bovinos foram divididos em seis grupos (n=10), considerando um desenho experimental de dois fatores (3x2): cimento endodôntico em três níveis [à base de resina epóxica (AH Plus), eugenol (Endofill) e resina de salicilato e MTA (MTA Fillapex)] e o tempo para cimentação em dois níveis (cimentação imediata e 15 dias pós a obturação). Após cimentação do pino de fibra, fatias com 2 mm de espessura foram obtidas e submetidas ao teste de push-out. Os padrões de falha foram analisados em estereomicroscópio (40×) e classificados em: adesiva na interface cimento/dentina, adesiva cimento/pino, coesiva do cimento, coesiva do pino, coesiva da dentina e mista. Os dados foram analisados através dos testes de ANOVA a dois fatores e post hoc de Tukey (α=0,05). Quando os pinos de fibra foram cimentados imediatamente após a obturação dos condutos, a resistência adesiva foi similar, independentemente do tipo de cimento endodôntico. Entretanto, após 15 dias, os dentes obturados com cimento resinoso à base de resina epóxica apresentaram os maiores valores de resistência adesiva (p<0,05). Os valores de resistência adesiva do mesmo cimento nos diferentes tempos experimentais não foram alterados. O principal tipo de falha foi adesiva na interface cimento/dentina (89,4%). O tempo decorrido entre a obturação dos condutos e a cimentação do pino não influenciou a adesão do pino de fibra à dentina radicular. Por outro lado, o tipo de cimento endodôntico influencia a adesão entre dentina radicular e pinos de fibra.

Fracture resistance of weakened teeth restored using accessory glass fiber posts.

This study used differential root weakening to evaluate the fracture resistance of bovine teeth restored using glass fiber posts (with or without accessory glass fiber posts). Fifty bovine mandibular incisors were sectioned 14 mm from the apex, fixed in acrylic resin blocks, and divided into 5 groups: healthy roots with a glass fiber post (Group 1), partially weakened teeth with a glass fiber post (Group 2), partially weakened teeth with a glass fiber post and 2 accessory glass fiber posts (Group 3), extensively weakened teeth with a glass fiber post (Group 4), and extensively weakened teeth with a glass fiber post and 5 accessory glass fiber posts (Group 5). Posts were luted with resin cement, cores were prepared using composite resin, and metallic crowns were cemented. The specimens were stored in distilled water at 37°C for more than 72 hours until the fracture resistance test. Specimens were loaded at 135 degrees relative to the long axis of the tooth at a crosshead speed of 0.5 mm/minute in a universal testing machine. All groups predominantly exhibited favorable failure patterns and there were no statistically significant differences between groups (two-way ANOVA, α = 0.05).

Effect of passive ultrassonic instrumentation as a final irrigation protocol on debris and smear layer removal--a SEM analysis.

This study sought to evaluate the efficacy of passive ultrasonic irrigation (PUI) on removing the smear layer and debris from root dentin using scanning electron microscopy (SEM). Twenty-five bovine incisors were manually prepared and divided into three groups according to the final irrigation protocol: EDTA, final irrigation with 12 mL of 17% EDTA for 3 minutes followed by 5 mL of 2.5% NaOCl; EDTA/PUI, final flush with 4 mL of 17% EDTA and PUI for 30 seconds. These procedures were repeated three times to standardize the volume of the irrigant. Control group, after preparation, the specimens were irrigated only with 17 mL of 2.5% NaOCl. The roots were fractured and analyzed using SEM. The intragroup analysis revealed that the EDTA/PUI protocol removed a higher amount of debris at the cervical third (P = 0.03). The intergroup analysis revealed that EDTA/PUI presented the lowest amount of debris at the cervical third (P = 0.007). Smear layer scores were higher in the control group compared with the EDTA and EDTA/PUI groups, but only at the cervical third (P = 0.02). None of the final irrigant protocols completely removed the smear layer and debris. EDTA/PUI only improved the removal of debris at the cervical third.

Vertical root fractures and dentin defects: effects of root canal preparation, filling, and mechanical cycling.

INTRODUCTION: The aim of this study was to evaluate the ex vivo effects of root canal preparation, filling techniques, and mechanical cycling (MC) on the incidence of dentin defects and vertical root fractures (VRFs). METHODS: Seventy extracted single-rooted teeth were divided into 6 groups. The first 2 groups were the unprepared and unprepared/MC groups. The other groups were prepared by using Gates Glidden drills and ProTaper Universal files up to F3 and were grouped according to the following: prepared teeth and the absence of root canal filling, passive technique, lateral compaction, and Tagger's hybrid technique. All of the groups except the unprepared group were subjected to MC (1,000,000 cycles, 90 N, 4 Hz, 37°C). The roots were then sectioned horizontally at 3, 6, and 9 mm from the apex and observed under a ×10 stereomicroscope. The defects were categorized as no defect, vertical root fracture, and other defects. The differences between the groups were analyzed by using the Fisher exact and χ(2) tests. RESULTS: MC by itself did not influence the incidence of dentinal defects (P > .05, between the unprepared and unprepared/MC groups). The filled groups presented a similar incidence of other defects (P > .05), although VRFs were observed only when the MC was associated with pressure filling techniques (the lateral compaction and Tagger's hybrid groups). CONCLUSIONS: MC by itself did not induce VRF. When associated with apical pressure filling techniques, however, VRF occurred in 13.3% (lateral compaction) and 33.3% (Tagger's hybrid) of the cases.