Point-source tracking of microplastics in sewerage systems. Finding the culprit.

Prior microplastic (MP) research has focused more on the efficiency of removal techniques within wastewater treatment plants (WWTP), with comparatively less emphasis placed on identifying and understanding the sources of MPs. In this study, the presence of MP in wastewater from various sources and their associated WWTPs was investigated. Utilising focal plane array micro Fourier Transform Infrared spectroscopy (FPA-µFTIR), the chemical composition, size distribution, and mass of MPs were quantified. Notably, wastewater generated from an industrial laundry facility exhibited the highest MP concentration of 6900 counts L-1 or 716 µg L-1. Domestic sewage contained MP levels (1534 counts L-1; 158 µg L-1) similar to those at the WWTPs (1640 counts L-1; 114 µg L-1). Polyester was identified as a significant component in most of the sources, predominantly originating from the shedding of fibres during textile washing. Additionally, a post-processing software was employed to compare two methods for fibre identification: aspect ratio and elongation ratio. These findings underscore the potential environmental impact of domestic activities and laundry washing on wastewater MP content.

Chlorination of bisphenol A: non-targeted screening for the identification of transformation products and assessment of estrogenicity in generated water.

Besides the performance of water treatments on the removal of micropollutants, concern about the generation of potential biologically active transformation products has been growing. Thus, the detection and structural elucidation of micropollutants transformation products have turned out to be major issues to evaluate comprehensively the efficiency of the processes implemented for drinking water treatment. However, most of existing water treatment studies are carried out at the bench scale with high concentrations and simplified conditions and thus do not reflect realistic conditions. Conversely, this study describes a non-targeted profiling approach borrowed from metabolomic science, using liquid chromatography coupled to high-resolution mass spectrometry, in order to reveal potential chlorination products of bisphenol A (BPA) in real water samples spiked at 50µgL(-1). Targeted measurements first evidenced a fast removal of BPA (>99%) by chlorination with sodium hypochlorite (0.8mgL(-1)) within 10min. Then, the developed differential global profiling approach enabled to reveal 21 chlorination products of BPA. Among them, 17 were brominated compounds, described for the first time, demonstrating the potential interest of this innovative methodology applied to environmental sciences. In parallel to the significant removal of BPA, the estrogenic activity of water samples, evaluated by ER-CALUX assay, was found to significantly decrease after 10min of chlorination. These results confirm that chlorination is effective at removing BPA in drinking water and they may indicate that the generated compounds have significantly lower estrogenic activity.

Differential chemical profiling to identify ozonation by-products of estrone-sulfate and first characterization of estrogenicity in generated drinking water.

For a few years, the concern of water treatment companies is not only focused on the removal of target micropollutants but has been extended to the investigation of potential biologically active by-products generated during the treatment processes. Therefore, some methods dedicated to the detection and structural characterization of such by-products have emerged. However, most of these studies are usually carried out under simplified conditions (e.g. high concentration levels of micropollutants, drastic treatment conditions, use of deionized or ultrapure water) and somewhat unrealistic conditions compared to that implemented in water treatment plants. In the present study, a real field water sample was fortified at the part-per-billion level (50 µg L(-1)) with estrone-3-sulfate (E1-3S) before being ozonated (at 1 mg L(-1)) for 10 min. In a first step, targeted measurements evidenced a degradation of the parent compound (>80%) in 10 min. Secondly, a non-targeted chemical profiling approach derived from metabolomic profiling studies allowed to reveal 11 ozonation by-products, among which 4 were found predominant. The estrogenic activity of these water samples spiked with E1-3S before and after treatment was assessed by the ER-CALUX assay and was found to decrease significantly after 10 min of ozonation. Therefore, this innovative methodological strategy demonstrated its suitability and relevancy for revealing unknown compounds generated from water treatment, and permitted to generate new results regarding specifically the impact of ozonation on estrone-3-sulfate. These results confirm that ozonation is effective at removing E1-3S in drinking water and indicate that the by-products generated have significantly lower estrogenic activity.

Differential global profiling as a new analytical strategy for revealing micropollutant treatment by-products: application to ethinylestradiol and chlorination water treatment.

The detection and structural elucidation of micropollutants treatment by-products are major issues to estimate efficiencies of the processes employed for drinking water production versus endocrine disruptive compounds contamination. This issue was mainly investigated at the laboratory scale and in high concentration conditions. However, potential by-products generated after chlorination can be influenced by the dilution factor employed in real conditions. The present study proposes a new methodology borrowed to the metabolomic science, using liquid chromatography coupled to high-resolution mass spectrometry, in order to reveal potential chlorination by-products of ethinylestradiol in spiked real water samples at the part-per-billion level (5 µg L(-1)). Conventional targeted measurements first demonstrated that chlorination with sodium hypochlorite (0.8 mg L(-1)) led to removals of ethinylestradiol over 97%. Then, the developed differential global profiling approach permitted to reveal eight chlorination by-products of EE2, six of them being described for the first time. Among these eight halogenated compounds, five have been structurally identified, demonstrating the potential capabilities of this new methodology applied to environmental samples.