Biocellulose-based hydrogel dressing as a strategy for the management of chronic arterial wounds.

PURPOSE: To evaluate using a biocellulose-based hydrogel as an adjuvant in the healing process of arterial ulcers. METHODS: A prospective single group quasi-experimental study was carried out with chronic lower limb arterial ulcer patients. These patients received biocellulose-based hydrogel dressings and outpatient guidance on dressing and periodic reassessments. The primary outcomes were the ulcer-healing rate and product safety, which were assessed by ulcer area measured in photographic records of pre-treatment and posttreatment after 7, 30, and 60 days. Secondary outcomes were related to clinical assessment by the quality-of-life scores (SF-36 and EQ-5D) and pain, evaluated by the visual analogue scale (VAS). RESULTS: Seventeen participants were included, and one of them was excluded. Six patients (37%) had complete wound healing, and all patients had a significant reduction in the ulcer area during follow-up (233.6mm2 versus 2.7mm2) and reduction on the score PUSH 3.0 (p < 0.0001). The analysis of the SF-36 and EQ-5D questionnaires showed a statistically significant improvement in almost all parameters analyzed and with a reduction of pain assessed by the VAS. CONCLUSIONS: The biocellulose-based hydrogel was safe and showed a good perspective to promoting the necessary conditions to facilitate partial or complete healing of chronic arterial ulcers within a 60-day follow-up. Quality of life and pain were positively affected by the treatment.

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect.

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Bacterial cellulose nanocrystals obtained through enzymatic and acidic routes: A comparative study of their main properties and in vitro biological responses.

Cellulose nanocrystals (CNCs) are crystalline domains isolated from cellulosic fibers. They have been utilized in a wide range of applications, such as reinforcing fillers, antibacterial agents and manufacturing of biosensors. Whitin this context, the aim of this work was to obtain and analyze CNCs extracted from bacterial nanocellulose (BNC) using two distinct methods combined with milling pre-treatment: an acidic hydrolysis using 64 % sulfuric acid and an enzymatic hydrolysis using a commercial cellulase enzyme mixture. The CNCs obtained from the enzymatic route (e-CNCs) were observed to be spherical nanoparticles with diameter of 56 ± 11 nm. In contrast, the CNCs from the acid hydrolysis (a-CNCs) appeared as needle-shaped nanoparticles with a high aspect ratio with lengths/widths of 158 ± 64 nm/11 ± 2 nm. The surface zeta potential (ZP) of the a-CNCs was -30,8 mV, whereas the e-CNCs has a potential of +2.70 ± 3.32 mV, indicating that a-CNCs consisted of negatively charged particles with higher stability in solution. Although the acidic route resulted in nanocrystals with a slightly higher crystallinity index compared to the enzymatic route, e-CNCs was found to be more thermally stable than BNC and a-CNCs. Here, we also confirmed the safety of a-CNCs and e-CNCs using L929 cell line. Lastly, this article describes two different CNCs synthesis approaches that leads to the formation of nanoparticles with different dimensions, morphology and unique physicochemical properties. To the best of our knowledge, this is the first study to yield spherical nanoparticles as a result of BNC enzymatic treatment.

Development and Characterization of High-Absorption Microencapsulated Organic Propolis EPP-AF® Extract (i-CAPs).

The demand for organic and functional food continues to increase yearly. Among the available functional foods, propolis is a bee product that has various beneficial properties, including antimicrobial, antioxidant, and anti-inflammatory activities. However, it generally is only available in ethanol solution, which has poor bioavailability, as it is relatively insoluble in water. The use of such ethanol extracts is often objectionable because of the alcohol content and because they have a strong and striking taste. Development of alternatives that can efficiently and safely increase solubility in water, and that meet organic production specifications, has been a challenge. To address these concerns, microcapsules were developed using spray-dryer technology from an emulsion based on EPP-AF® propolis and gum arabic (i-CAPS). These propolis-loaded microcapsules were characterized using FT-IR, SEM, TGA, HPLC, and spectrophotometric techniques, along with determination of antimicrobial, antioxidant, antitumor, anti-inflammatory, and antihypercholesterolemic activities, as well as permeability in in vitro models. The production system resulted in microcapsules with a spherical shape and an encapsulation efficiency of 93.7 ± 0.7%. They had IC50s of 2.654 ± 0.062 and 7.342 ± 0.058 µg/mL by FRAP and DPPH antioxidant methods, respectively. The EPP-AF® i-CAPS also had superior antimicrobial activity against Gram-positive bacteria. Antitumor activity was calculated based on the concentration that inhibited 50% of growth of AGS, Caco-2, and MCF-7 cell strains, giving results of 154.0 ± 1.0, 117 ± 1.0, and 271.0 ± 25 µg/mL, respectively. The microcapsule presentation reduced the permeation of cholesterol by 53.7%, demonstrating antihypercholesterolemic activity, and it improved the permeability of p-coumaric acid and artepillin C. The IC50 for NO production in RAW 264.7 cells was 59.0 ± 0.1 µg/mL. These findings demonstrate the potential of this new propolis product as a food and pharmaceutical ingredient, though additional studies are recommended to validate the safety of proposed dosages.

Designing Highly Photoactive Hybrid Aerogels for In-Flow Photocatalytic Contaminant Removal Using Silica-Coated Bacterial Nanocellulose Supports.

This study explores the use of silica-coated bacterial nanocellulose (BC) scaffolds with bulk macroscopic yet nanometric internal pores/structures as functional supports for high surface area titania aerogel photocatalysts to design flexible, self-standing, porous, and recyclable BC@SiO2-TiO2 hybrid organic-inorganic aerogel membranes for effective in-flow photo-assisted removal of organic pollutants. The hybrid aerogels were prepared by sequential sol-gel deposition of the SiO2 layer over BC, followed by coating of the resulting BC@SiO2 membranes with a porous titania aerogel overlayer of high surface area using epoxide-driven gelation, hydrothermal crystallization, and subsequent supercritical drying. The silica interlayer between the nanocellulose biopolymer scaffold and the titania photocatalyst was found to greatly influence the structure and composition, particularly the TiO2 loading, of the prepared hybrid aerogel membranes, allowing the development of photochemically stable aerogel materials with increased surface area/pore volume and higher photocatalytic activity. The optimized BC@SiO2-TiO2 hybrid aerogel showed up to 12 times faster in-flow photocatalytic removal of methylene blue dye from aqueous solution in comparison with bare BC/TiO2 aerogels and outperformed most of the supported-titania materials reported earlier. Moreover, the developed hybrid aerogels were successfully employed to remove sertraline drug, a model emergent contaminant, from aqueous solution, thus further demonstrating their potential for water purification.

Development and Characterization of New Green Propolis Extract Formulations as Promising Candidates to Substitute for Green Propolis Hydroalcoholic Extract.

The technologies used to produce the different dosage forms of propolis can selectively affect the original propolis compounds and their biological activities. The most common type of propolis extract is hydroethanolic. However, there is considerable demand for ethanol-free propolis presentations, including stable powder forms. Three propolis extract formulations were developed and investigated for chemical composition and antioxidant and antimicrobial activity: polar propolis fraction (PPF), soluble propolis dry extract (PSDE), and microencapsulated propolis extract (MPE). The different technologies used to produce the extracts affected their physical appearance, chemical profile, and biological activity. PPF was found to contain mainly caffeic and p-Coumaric acid, while PSDE and MPE showed a chemical fingerprint closer to the original green propolis hydroalcoholic extract used. MPE, a fine powder (40% propolis in gum Arabic), was readily dispersible in water, and had less intense flavor, taste, and color than PSDE. PSDE, a fine powder (80% propolis) in maltodextrin as a carrier, was perfectly water-soluble and could be used in liquid formulations; it is transparent and has a strong bitter taste. PPF, a purified solid with large amounts of caffeic and p-Coumaric acids, had the highest antioxidant and antimicrobial activity, and therefore merits further study. PSDE and MPE had antioxidant and antimicrobial properties and could be used in products tailored to specific needs.

Bacterial Cellulose-Based Materials as Dressings for Wound Healing.

Bacterial cellulose (BC) is produced by several microorganisms as extracellular structures and can be modified by various physicochemical and biological strategies to produce different cellulosic formats. The main advantages of BC for biomedical applications can be summarized thus: easy moldability, purification, and scalability; high biocompatibility; and straightforward tailoring. The presence of a high amount of free hydroxyl residues, linked with water and nanoporous morphology, makes BC polymer an ideal candidate for wound healing. In this frame, acute and chronic wounds, associated with prevalent pathologies, were addressed to find adequate therapeutic strategies. Hence, the main characteristics of different BC structures-such as membranes and films, fibrous and spheroidal, nanocrystals and nanofibers, and different BC blends, as well as recent advances in BC composites with alginate, collagen, chitosan, silk sericin, and some miscellaneous blends-are reported in detail. Moreover, the development of novel antimicrobial BC and drug delivery systems are discussed.

Review of Bacterial Nanocellulose as Suitable Substrate for Conformable and Flexible Organic Light-Emitting Diodes.

As the development of nanotechnology progresses, organic electronics have gained momentum in recent years, and the production and rapid development of electronic devices based on organic semiconductors, such as organic light-emitting diodes (OLEDs), organic photovoltaic cells (OPVs), and organic field effect transistors (OFETs), among others, have excelled. Their uses extend to the fabrication of intelligent screens for televisions and portable devices, due to their flexibility and versatility. Lately, great efforts have been reported in the literature to use them in the biomedical field, such as in photodynamic therapy. In tandem, there has been considerable interest in the design of advanced materials originating from natural sources. Bacterial nanocellulose (BNC) is a natural polymer synthesized by many microorganisms, notably by non-pathogenic strains of Komagataeibacter (K. xylinus, K. hansenii, and K. rhaeticus). BNC shows distinct physical and mechanical properties, including its insolubility, rapid biodegradability, tensile strength, elasticity, durability, and nontoxic and nonallergenic features, which make BNC ideal for many areas, including active and intelligent food packaging, sensors, water remediation, drug delivery, wound healing, and as conformable/flexible substrates for application in organic electronics. Here, we review BNC production methods, properties, and applications, focusing on electronic devices, especially OLEDs and flexible OLEDs (FOLEDs). Furthermore, we discuss the future progress of BNC-based flexible substrate nanocomposites.

Development of multiparticulate systems based on natural polymers for morin controlled release.

This study aimed to develop a multiparticulate system based on sodium alginate/gellan gum polymers for morin controlled release using standardized spray-dryer parameters. A 24 experimental factorial design was used to standardize spray-dryer parameters. After standardization, three systems with three different proportions of the natural polymers (50:50, 25:75, 75:25; sodium alginate: gellan gum) with and without morin (control) were developed. The systems were characterized according to its morphology and physicochemical properties. Next, the systems were evaluated regarding antibiofilm and antimicrobial activity against Streptococcus mutans. The factorial design indicated the use of the following parameters: i) air flow rate: 1.0 m3 /min; ii) outlet temperature: 120 °C; iii) natural polymers combination in different proportions; iiii) polymer concentration: 2 %. Scanning electron microscopy showed microparticles with spherical shape and rough surface. The samples released 99.86 % ± 9.36; 85.45 % ± 8.31; 86.87 % ± 3.83 of morin after 480 min. The systems containing morin significantly reduced S. mutans biofilm biomass, microbial viability and acidogenicity when compared to their respective controls. In conclusion, the spray-dryer parameters were standardized to the highest possible yield values and proved to be efficient for morin encapsulation and controlled release. Furthermore, these systems controlled important virulence factors of S. mutans biofilms.

Solid Dispersions Incorporated into PVP Films for the Controlled Release of Trans-Resveratrol: Development, Physicochemical and In Vitro Characterizations and In Vivo Cutaneous Anti-Inflammatory Evaluation.

Trans-resveratrol can promote various dermatological effects. However, its high crystallinity decreases its solubility and bioavailability. Therefore, solid dispersions have been developed to promote its amorphization; even so, they present as powders, making cutaneous controlled drug delivery unfeasible and an alternative necessary for their incorporation into other systems. Thus, polyvinylpyrrolidone (PVP) films were chosen with the aim of developing a controlled delivery system to treat inflammation and bacterial infections associated with atopic dermatitis. Four formulations were developed: two with solid dispersions (and trans-resveratrol) and two as controls. The films presented with uniformity, as well as bioadhesive and good barrier properties. X-ray diffraction showed that trans-resveratrol did not recrystallize. Fourier-transform infrared spectroscopy (FT-IR) and thermal analysis evidenced good chemical compatibilities. The in vitro release assay showed release values from 82.27 ± 2.60 to 92.81 ± 2.50% (being a prolonged release). In the in vitro retention assay, trans-resveratrol was retained in the skin, over 24 h, from 42.88 to 53.28%. They also had low cytotoxicity over fibroblasts. The in vivo assay showed a reduction in inflammation up to 66%. The films also avoided Staphylococcus aureus's growth, which worsens atopic dermatitis. According to the results, the developed system is suitable for drug delivery and capable of simultaneously treating inflammation and infections related to atopic dermatitis.

Study of antimycobacterial, cytotoxic, and mutagenic potential of polymeric nanoparticles of copper (II) complex.

This study aimed to encapsulate and characterise a potential anti-tuberculosis copper complex (CuCl2(INH)2.H2O:I1) into polymeric nanoparticles (PNs) of polymethacrylate copolymers (Eudragit®, Eu) developed by nanoprecipitation method. NE30D, S100 and, E100 polymers were tested. The physicochemical characterisations were performed by DLS, TEM, FTIR, encapsulation efficiency and, in vitro release studies. Encapsulation of I1 in PN-NE30D, PN-E100, and PN-S100 was 26.3%, 94.5%, 22.6%, respectively. The particle size and zeta potentials were 82.3 nm and -24.5 mV for PNs-NE30D, 304.4 nm and +18.7 mV for PNs-E100, and 517.9 nm and -6.9 mV for PNs-S100, respectively. All PDIs were under 0.5. The formulations showed an I1 controlled release at alkaline pH with 29.7% from PNs-NE30D, 7.9% from PNs-E100 and, 28.1% from PNs-S100 at 1 h incubation. PNs were stable for at least 3 months. Particularly, PNs-NE30D demonstrated moderate inhibition of M. tuberculosis and low cytotoxic activity. None of the PNs induced mutagenicity.

Mucoadhesive controlled-release formulations containing morin for the control of oral biofilms.

This study aimed to evaluate the antimicrobial and anti-biofilm activity of morin on polymicrobial biofilms and its cytotoxicity in controlled-release films and tablets based on gellan gum. Polymicrobial biofilms were formed from saliva for 48 h under an intermittent exposure regime to 1% sucrose and in contact with films or tablets of gellan gum containing 2 mg of morin each. Acidogenicity, bacterial viability, dry weight and insoluble extracellular polysaccharides from biofilms were evaluated. The cytotoxicity of morin was evaluated in oral keratinocytes. Morin released from the systems reduced the viability of all the microbial groups evaluated, as well as the dry weight and insoluble polysaccharide concentration in the matrix and promoted the control of acidogenicity when compared with the control group without the substance. Morin was cytotoxic only at the highest concentration evaluated. In conclusion, morin is an effective agent and shows antimicrobial and anti-biofilm activity against polymicrobial biofilms.

Evolução da cicatrização de lesões por pressão em tratamento com hidrogel à base de biopolímeros / Evolution of wound healing by pressure in biopolymer hydrogel treatment / Evolución de la cicatrización de lesiones por presión en el tratamiento con hidrógel de biopolímero

Introdução: Lesões por pressão têm evolução geralmente rápida, podem levar ao desenvolvimento de infecções de partes moles e demandam tratamento específico e prolongado. Objetivo: Avaliar a eficácia do hidrogel à base de celulose bacteriana no processo cicatricial de lesões por pressão. Material e Método: Estudo descritivo, observacional e prospectivo de abordagem quantitativa. Amostra composta de três pacientes com lesões por pressão de estágios III e IV, atendidos pela Secretaria de Saúde numa cidade do interior paulista. Os dados foram coletados de junho a julho de 2019 e as lesões avaliadas semanalmente. No tratamento se utilizou cobertura de hidrogel à base de celulose bacteriana, para a avaliação do processo cicatricial utilizou-se a escala de Bates-Jensen Wound Assessment Tool e as Classificações dos Resultados de Enfermagem. Os dados foram analisados pelo programa Excel. Parecer 3.337.831. Resultados: A evolução cicatricial mostrou-se adequada e significativa a cada visita, diminuindo o escore da maioria dos indicadores analisados. Conclusão: Todas as lesões apresentaram desbridamento autolítico, facilitando a remoção dos tecidos desvitalizados, além de diminuir o tamanho e a profundidade ao promover o desenvolvimento de tecido de granulação.(AU)

Introduction: Pressure injuries have generally rapid evolution, may lead to the development of soft tissue infections and require specific and prolonged treatment. Objective: To evaluate the effectiveness of hydrogel based on bacterial cellulose in the cicatricial process of pressure injuries. Material and Method: Descriptive, observational and prospective study of quantitative approach. A composite sample of three patients with stage III and IV pressure injuries, attended by the Department of Health in a city in the interior of the state of São Paulo. Data were collected from June to July 2019 and lesions were evaluated weekly. The treatment used hydrogel coverage based on bacterial cellulose, the Bates-Jensen Wound Assessment Tool and the Classification of Nursing Results were used to evaluate the cicatricial process. The data were analyzed by the Excel program. Results: The cicatricial evolution was adequate and significant at each visit, decreasing the score of most indicators analyzed. Conclusion: All lesions presented autolytic debridement, facilitating the removal of devitalized tissues, besides decreasing the size and depth while promoting the development of granulation tissue.(AU)

Introducción: Las lesiones por presión tienen una evolución generalmente rápida, pueden conducir al desarrollo de infecciones de tejidos blandos y requieren un tratamiento específico y prolongado. Objetivo: Evaluar la efectividad del hidrogel a base de celulosa bacteriana en el proceso de curación de lesiones por presión. Material y método: Estudio descriptivo, observacional y prospectivo con enfoque cuantitativo. Muestra compuesta por tres pacientes con lesiones por presión estadios III y IV, atendidos por el Departamento de Salud de una ciudad del interior de São Paulo. Los datos se recopilaron de junio a julio de 2019 y las lesiones se evaluaron semanalmente. En el tratamiento se utilizó una cubierta de hidrogel a base de celulosa bacteriana y la valoración del proceso de cicatrización mediante la Herramienta de Evaluación de Heridas Bates-Jensen y las Clasificaciones de Resultados de Enfermería. Datos analizados por el programa Excel. Opinión 3.337.831. Resultados: La evolución de la cicatrización se mostró adecuada y significativa en cada visita, disminuyendo la puntuación de la mayoría de los indicadores analizados. Conclusión: Todas las lesiones presentaron desbridamiento autolítico, facilitando la remoción de tejidos desvitalizados, además de disminuir el tamaño y profundidad al promover el desarrollo de tejido de granulación.(AU)

Genotoxicological safety assessment of puree-only edible films from onion bulb (Allium cepa L.) for use in food packaging-related applications.

The production of films and coatings from onion (Allium cepa L.) to be applied as packaging is attractive, due to its high nutritional and therapeutic value. Also, it can collaborate to minimize environmental impacts caused by the improper disposal of products made from plastics. However, despite it being an innovative and novel proposal, onion films for the development of edible packaging should be evaluated before being considered nontoxic and safe for human consumption. Thus, the objective of the present study was to elucidate the cytotoxic and mutagenic profile of eluates of polymer films of Allium cepa L. obtained by the casting process and to verify their safety for commercial purposes. The analysis of cellular viability demonstrated greater cytotoxicity for unwashed hydrothermally treated pulp (HTP) than for films of washed hydrothermally treated pulp (W-HTP). Regarding the mutagenic activity, the HTP and W-HTP films were not able to statistically increase the frequencies of the biomarkers for chromosome damage (micronucleus test) at the tested concentrations. However, the HTP films showed signs of mutagenicity in the Ames test (gene mutations), suggesting caution in their use. The detection of genotoxicity is highly recommended in order to avoid the risk of genotoxic exposure to mutagens and carcinogens. In conclusion, the absence of mutagenicity and cytotoxicity observed in this study is extremely relevant, because it provides support for toxicogenic properties of the Allium cepa films with promising applicability in the food industry. PRACTICAL APPLICATION: The bioplastics made from onion bulbs are multifunctional materials, which requires safety profile assessment. The results of the mutagenicity and cytotoxicity tests suggests that especially the W-HTP films are harmless, supporting at the first level of evidence, its safety potential to be used in the food industry (food films), biodegradable packaging, and biomaterials (substrates for drug delivery system).

Antimicrobial Orthodontic Wires Coated with Silver Nanoparticles

Abstract Conventional orthodontic treatment with the use of stainless steel may be detrimental to oral health by promoting demineralizing lesions appearance and increasing adhesion and formation of bacterial biofilm, inducing the development of cavities. An alternative that has been researched to reduce the side effects of orthodontic treatment is the coating of materials with antimicrobial nanoparticles. Nanometric- sized particles increase their surface area and contact with the microbial membrane, consequently intensifying their bacteriostatic and bactericidal effect. In this work, hydrothermal synthesis, a "green" process was used to attach silver nanoparticles (AgNPs) to the surface of two different brands of orthodontic wires. The coated materials were analyzed for their physicochemical properties by scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), which showed the distribution of AgNPs along the wires without modifying their properties. In the microbiological test, one of the brands showed a statistically significant difference in microbial adhesion and biofilm formation by Staphylococcus aureus and Streptococcus mutans. Results lead to the conclusion that antimicrobial orthodontic wires coated with silver nanoparticles through hydrothermal synthesis is a promising material for the improvement of orthodontic treatment.

Cytotoxicity of New Calcium Aluminate Cement (EndoBinder) Containing Different Radiopacifiers.

This study aimed to evaluate the cytotoxicity of a calcium aluminate cement (EndoBinder) containing different radiopacifiers, Bi2O3, ZnO or ZrO2, compared with Mineral Trioxide Aggregate (MTA). According to ISO 10993-12:2012 (E) recommendations, 0.2 g of each cement were applied in transwell inserts and placed in 24-well culture plates containing 1 mL of culture medium (DMEM). After 24 h of incubation, the extracts (DMEM containing components released from the cements) were applied to immortalized odontoblast-like MDPC-23 cells. Cell viability (MTT test), alkaline phosphatase activity (ALP), total protein production and cell morphology (Scanning Electron Microscopy - SEM) were evaluated. The volume of 50 µL of extract was used to determine the chemical elements released by the cements using Energy Dispersive Spectroscopy (EDS). The following groups were established (n=6): NC - negative control (without treatment); EB - EndoBinder without radiopacifier; EBBO - EndoBinder+Bi2O3; EBZnO - EndoBinder+ZnO; EBZrO - EndoBinder+ZrO2 and WMTA - White MTA. Data were subjected to statistical analysis (Kruskal-Wallis test, level of significance=5%). Cells exposed to the different versions of EndoBinder presented small reduction in viability, total protein production and ALP activity, with values similar to the NC and WMTA groups (p>0.05). Different elements (C, O, Na, Al, P, Si, Cl, Bi, K) released by the cements were detected in the extracts. However, the cells had no significant changes in their morphology. EndoBinder and MTA did not affect negatively the metabolism of the odontoblastic-like cells, showing it to be cytocompatible, irrespective of the used radiopacifier.

Cytotoxicity of New Calcium Aluminate Cement (EndoBinder) Containing Different Radiopacifiers

Abstract This study aimed to evaluate the cytotoxicity of a calcium aluminate cement (EndoBinder) containing different radiopacifiers, Bi2O3, ZnO or ZrO2, compared with Mineral Trioxide Aggregate (MTA). According to ISO 10993-12:2012 (E) recommendations, 0.2 g of each cement were applied in transwell inserts and placed in 24-well culture plates containing 1 mL of culture medium (DMEM). After 24 h of incubation, the extracts (DMEM containing components released from the cements) were applied to immortalized odontoblast-like MDPC-23 cells. Cell viability (MTT test), alkaline phosphatase activity (ALP), total protein production and cell morphology (Scanning Electron Microscopy - SEM) were evaluated. The volume of 50 µL of extract was used to determine the chemical elements released by the cements using Energy Dispersive Spectroscopy (EDS). The following groups were established (n=6): NC - negative control (without treatment); EB - EndoBinder without radiopacifier; EBBO - EndoBinder+Bi2O3; EBZnO - EndoBinder+ZnO; EBZrO - EndoBinder+ZrO2 and WMTA - White MTA. Data were subjected to statistical analysis (Kruskal-Wallis test, level of significance=5%). Cells exposed to the different versions of EndoBinder presented small reduction in viability, total protein production and ALP activity, with values similar to the NC and WMTA groups (p>0.05). Different elements (C, O, Na, Al, P, Si, Cl, Bi, K) released by the cements were detected in the extracts. However, the cells had no significant changes in their morphology. EndoBinder and MTA did not affect negatively the metabolism of the odontoblastic-like cells, showing it to be cytocompatible, irrespective of the used radiopacifier.

Resumo Este estudo avaliou a citotoxicidade de um cimento de aluminato de cálcio (EndoBinder) contendo diferentes radiopacificadores, Bi2O3, ZnO ou ZrO2, comparativamente ao trióxido mineral agregado (MTA). Seguindo a norma ISO 10993-12:2012 (E), 0,2 g de cada cimento foi aplicada em insertos transwell, que foram colocados em placas de cultura de 24 wells contendo 1 mL de meio de cultura (DMEM). Após 24 h de incubação, os extratos (DMEM contendo componentes liberados dos cimentos) foram aplicados sobre células pulpares imortalizadas MDPC-23. Viabilidade celular (teste de MTT), atividade da fosfatase alcalina (ALP), produção de proteína total e a morfologia das células (Microscópio Eletrônico de Varredura - MEV) foram avaliadas. Um volume de 50 µL do extrato foi utilizado para determinar, através de Espectroscopia de Energia Dispersiva (EDS), os elementos químicos liberados pelos cimentos. Os seguintes grupos foram estabelecidos (n=6): NC - controle negativo (sem tratamento); EB - EndoBinder sem radiopacificador; EBBO - EndoBinder+Bi2O3; EBZnO - EndoBinder+ZnO; EBZrO - EndoBinder+ZrO2 e WMTA - MTA branco. Os dados foram submetidos à análise estatística (teste de Kruskal-Wallis, nível de significância=5%). Células expostas às diferentes versões de EndoBinder apresentaram pequena redução na viabilidade, produção de proteína total e atividade da ALP, com valores semelhantes aos grupos NC e WMTA (p>0,05). Diversos elementos (C, O, Na, Al, P, Si, Cl, Bi, K) liberados pelos cimentos foram detectados nos extratos. Entretanto, as células não apresentaram alterações significativas em sua morfologia. EndoBinder e MTA, não afetaram negativamente o metabolismo das células odontoblastóides, mostrando-se citocompatíveis, independente do radiopacificador utilizado.

Synthesis and factorial design applied to a novel chitosan/sodium polyphosphate nanoparticles via ionotropic gelation as an RGD delivery system.

Chitosan nanoparticles have been extensively studied for both drug and protein/peptide delivery. The aim of this study was to develop an optimized chitosan nanoparticle, by ionotropic gelation method, using 32 full factorial design with a novel polyanion, sodium polyphosphate, well known under the trade name Graham salt. The effects of these parameters on the particle size, zeta potential, and morphology and association efficiency were investigated. The optimized nanoparticles showed an estimated size of 166.20±1.95nm, a zeta potential of 38.7±1.2mV and an efficacy of association of 97.0±2.4%. The Atomic Force Microscopy (AFM) and Scanning Electronic Microscopy (SEM) revealed spherical nanoparticles with uniform size. Molecular interactions among the components of the nanoparticles and peptide were evaluated by Fourier Transform Infrared Spectra (FTIR) and Differential Scanning Calorimetry (DSC). The obtained results indicated that, the developed nanoparticles demonstrated high biocompatible, revealing no or low toxicity in the human cancer cell line (Caco-2). In conclusion, this work provides parameters that contribute to production of chitosan nanoparticles and sodium polyphosphate with desirable size, biocompatible and enabling successful use for protein/peptides delivery.

Physicochemical characterization by AFM, FT-IR and DSC and biological assays of a promising antileishmania delivery system loaded with a natural Brazilian product.

The control and treatment of Leishmaniasis, a neglected and infectious disease affecting approximately 12 million people worldwide, are challenging. Leishmania parasites multiply intracellularly within macrophages located in deep skin and in visceral tissues, and the currently employed treatments for this disease are subject to significant drawbacks, such as resistance and toxicity. Thus, the search for new Leishmaniasis treatments is compulsory, and Ocotea duckei Vattimo, a plant-derived product from the biodiverse Brazilian flora, may be a promising new treatment for this disease. In this regard, the aim of this work was to develop and characterize a delivery system based on solid lipid nanoparticles (SLN) that contain the liposoluble lignan fraction (LF) of Ocotea duckei Vattimo, which targets the Leishmania phagolysosome of infected macrophages. LF-loaded SLNs were obtained via the hot microemulsion method, and their physical and chemical properties were comprehensively assessed using PCS, AFM, SEM, FT-IR, DSC, HPLC, kinetic drug release studies, and biological assays. The size of the developed delivery system was 218.85±14.2 nm, its zeta potential was -30 mV and its entrapment efficiency (EE%) was high (the EEs% of YAN [yangambin] and EPI-YAN [epi-yangambin] markers were 94.21±0.40% and 94.20±0.00%, respectively). Microscopy, FT-IR and DSC assays confirmed that the delivery system was nanosized and indicated a core-shell encapsulation model, which corroborated the measured kinetics of drug release. The total in vitro release rates of YAN and EPI-YAN in buffer (with sink conditions attained) were 29.6±8.3% and 34.3±8.9%, respectively, via diffusion through the cellulose acetate membrane of the SLN over a period of 4 h. After 24 h, the release rates of both markers reached approximately 45%, suggesting a sustained pattern of release. Mathematical modeling indicated that both markers, YAN and EPI-YAN, followed matrix diffusion-based release kinetics (Higuchi's model) with an estimated diffusion coefficient (D) of 1.3.10(-6) cm(2)/s. The LF-loaded SLNs were non-toxic to murine macrophages (20-80 µg mL(-1) range) and exerted a prominent anti-leishmanial effect (20 µg mL(-1)). These data suggest this new and well-characterized lipid nanoparticle delivery system safely and effectively kills Leishmania and warrants further clinical investigation.

Draft Genome Sequence of Komagataeibacter intermedius Strain AF2, a Producer of Cellulose, Isolated from Kombucha Tea.

Here, we present the draft genome sequence of Komagataeibacter intermedius strain AF2, which was isolated from Kombucha tea and is capable of producing cellulose, although at lower levels compared to another bacterium from the same environment, K. rhaeticus strain AF1.