Controlled Synthesis of Tellurium Nanowires.

One-dimensional tellurium nanostructures can exhibit distinct electronic properties from those seen in bulk Te. The electronic properties of nanostructured Te are highly dependent on their morphology, and thus controlled synthesis processes are required. Here, highly crystalline tellurium nanowires were produced via physical vapour deposition. We used growth temperature, heating rate, flow of the carrier gas, and growth time to control the degree of supersaturation in the region where Te nanostructures are grown. The latter leads to a control in the nucleation and morphology of Te nanostructures. We observed that Te nanowires grow via the vapour-solid mechanism where a Te particle acts as a seed. Transmission electron microscopy (TEM) and electron diffraction studies revealed that Te nanowires have a trigonal crystal structure and grow along the (0001) direction. Their diameter can be tuned from 26 to 200 nm with lengths from 8.5 to 22 µm, where the highest aspect ratio of 327 was obtained for wires measuring 26 nm in diameter and 8.5 µm in length. We investigated the use of bismuth as an additive to reduce the formation of tellurium oxides, and we discuss the effect of other growth parameters.

Graphene-Sealed Flow Cells for In Situ Transmission Electron Microscopy of Liquid Samples.

We introduce a graphene-based nanofluidic cell that facilitates in situ imaging of liquid samples via transmission electron microscopy. The cell combines the benefits of graphene liquid cells-namely, high resolution, reduced charging effects, and excellent sample stability-with the ability to introduce reactants and control fluid concentrations as provided by conventional silicon-nitride-windowed flow cells. The graphene flow cell offers significantly less window bowing compared to existing commercial holders. We demonstrate the performance of the flow cell by imaging gold nanoparticle dynamics and uranyl acetate crystallization. Our results confirm the utility of graphene flow cells in obtaining the high spatial and temporal resolution required for probing the complex dynamics of nanoparticles and nucleation pathways in aqueous solutions.

Self-Assembled PCBM Nanosheets: A Facile Route to Electronic Layer-on-Layer Heterostructures.

We report on the self-assembly of semicrystalline [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanosheets at the interface between a hydrophobic solvent and water, and utilize this opportunity for the realization of electronically active organic/organic molecular heterostructures. The self-assembled PCBM nanosheets can feature a lateral size of >1 cm2 and be transferred from the water surface to both hydrophobic and hydrophilic surfaces using facile transfer techniques. We employ a transferred single PCBM nanosheet as the active material in a field-effect transistor (FET) and verify semiconductor function by a measured electron mobility of 1.2 × 10-2 cm2 V-1 s-1 and an on-off ratio of ∼1 × 104. We further fabricate a planar organic/organic heterostructure with the p-type organic semiconductor poly(3-hexylthiophene-2,5-diyl) as the bottom layer and the n-type PCBM nanosheet as the top layer and demonstrate ambipolar FET operation with an electron mobility of 8.7 × 10-4 cm2 V-1 s-1 and a hole mobility of 3.1 × 10-4 cm2 V-1 s-1.

Coronene-Based Graphene Nanoribbons Insulated by Boron Nitride Nanotubes: Electronic Properties of the Hybrid Structure.

We present a theoretical study on the formation of graphene nanoribbons-via polymerization of coronene molecules-inside the inner cavity of boron nitride nanotubes. We examine the electronic property of the hybrid system, and we show that the boron nitride nanotube does not significantly alter the electronic properties of the encapsulated graphene nanoribbon. Motivated by previous experimental works, we examine graphene nanoribbons with two different widths and investigate probable scenarios for defect formation and/or twisting of the resulting graphene nanoribbons and their effect on the electronic properties of the hybrid system.

Electrostatically Driven Nanoballoon Actuator.

We demonstrate an inflatable nanoballoon actuator based on geometrical transitions between the inflated (cylindrical) and collapsed (flattened) forms of a carbon nanotube. In situ transmission electron microscopy experiments employing a nanoelectromechanical manipulator show that a collapsed carbon nanotube can be reinflated by electrically charging the nanotube, thus realizing an electrostatically driven nanoballoon actuator. We find that the tube actuator can be reliably cycled with only modest control voltages (few volts) with no apparent wear or fatigue. A complementary theoretical analysis identifies critical parameters for nanotube nanoballoon actuation.

On the Stability and Abundance of Single Walled Carbon Nanotubes.

Many nanotechnological applications, using single-walled carbon nanotubes (SWNTs), are only possible with a uniform product. Thus, direct control over the product during chemical vapor deposition (CVD) growth of SWNT is desirable, and much effort has been made towards the ultimate goal of chirality-controlled growth of SWNTs. We have used density functional theory (DFT) to compute the stability of SWNT fragments of all chiralities in the series representing the targeted products for such applications, which we compare to the chiralities of the actual CVD products from all properly analyzed experiments. From this comparison we find that in 84% of the cases the experimental product represents chiralities among the most stable SWNT fragments (within 0.2 eV) from the computations. Our analysis shows that the diameter of the SWNT product is governed by the well-known relation to size of the catalytic nanoparticles, and the specific chirality is normally determined by the product's relative stability, suggesting thermodynamic control at the early stage of product formation. Based on our findings, we discuss the effect of other experimental parameters on the chirality of the product. Furthermore, we highlight the possibility to produce any tube chirality in the context of recent published work on seeded-controlled growth.

Fabrication of One-Dimensional Zigzag [6,6]-Phenyl-C61-Butyric Acid Methyl Ester Nanoribbons from Two-Dimensional Nanosheets.

One-dimensional (1D) zigzag [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanoribbons are produced by folding two-dimensional ultrathin PCBM nanosheets in a simple solvent process. The unique 1D PCBM nanostructures exhibit uniform width of 3.8 ± 0.3 nm, equivalent to four PCBM molecules, and lengths of 20-400 nm. These nanoribbons show well-defined crystalline structure, comprising PCBM molecules in a hexagonal arrangement without trapped solvent molecules. First-principle calculations and detailed experimental characterization provide an insight into the structure and formation mechanism of the 1D PCBM nanoribbons. Given their dimensions and physical properties, we foresee that these nanostructures should be ideal as acceptor material in organic solar cells.

C60/collapsed carbon nanotube hybrids: a variant of peapods.

We examine a variant of so-called carbon nanotube peapods by packing C60 molecules inside the open edge ducts of collapsed carbon nanotubes. C60 insertion is accomplished through a facile single-step solution-based process. Theoretical modeling is used to evaluate favorable low-energy structural configurations. Overfilling of the collapsed tubes allows infiltration of C60 over the full cross-section of the tubes and consequent partial or complete reinflation, yielding few-wall, large diameter cylindrical nanotubes packed with crystalline C60 solid cores.

Small palladium islands embedded in palladium-tungsten bimetallic nanoparticles form catalytic hotspots for oxygen reduction.

The sluggish kinetics of the oxygen reduction reaction at the cathode side of proton exchange membrane fuel cells is one major technical challenge for realizing sustainable solutions for the transportation sector. Finding efficient yet cheap electrocatalysts to speed up this reaction therefore motivates researchers all over the world. Here we demonstrate an efficient synthesis of palladium-tungsten bimetallic nanoparticles supported on ordered mesoporous carbon. Despite a very low percentage of noble metal (palladium:tungsten=1:8), the hybrid catalyst material exhibits a performance equal to commercial 60% platinum/Vulcan for the oxygen reduction process. The high catalytic efficiency is explained by the formation of small palladium islands embedded at the surface of the palladium-tungsten bimetallic nanoparticles, generating catalytic hotspots. The palladium islands are ~1 nm in diameter, and contain 10-20 palladium atoms that are segregated at the surface. Our results may provide insight into the formation, stabilization and performance of bimetallic nanoparticles for catalytic reactions.

Synthesis of palladium/helical carbon nanofiber hybrid nanostructures and their application for hydrogen peroxide and glucose detection.

We report on a novel sensing platform for H2O2 and glucose based on immobilization of palladium-helical carbon nanofiber (Pd-HCNF) hybrid nanostructures and glucose oxidase (GOx) with Nafion on a glassy carbon electrode (GCE). HCNFs were synthesized by a chemical vapor deposition process on a C60-supported Pd catalyst. Pd-HCNF nanocomposites were prepared by a one-step reduction free method in dimethylformamide (DMF). The prepared materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy. The Nafion/Pd-HCNF/GCE sensor exhibits excellent electrocatalytic sensitivity toward H2O2 (315 mA M(-1) cm(-2)) as probed by cyclic voltammetry (CV) and chronoamperometry. We show that Pd-HCNF-modified electrodes significantly reduce the overpotential and enhance the electron transfer rate. A linear range from 5.0 µM to 2.1 mM with a detection limit of 3.0 µM (based on the S/N = 3) and good reproducibility were obtained. Furthermore, a sensing platform for glucose was prepared by immobilizing the Pd-HCNFs and glucose oxidase (GOx) with Nafion on a glassy carbon electrode. The resulting biosensor exhibits a good response to glucose with a wide linear range (0.06-6.0 mM) with a detection limit of 0.03 mM and a sensitivity of 13 mA M(-1) cm(-2). We show that small size and homogeneous distribution of the Pd nanoparticles in combination with good conductivity and large surface area of the HCNFs lead to a H2O2 and glucose sensing platform that performs in the top range of the herein reported sensor platforms.

Formation of nitrogen-doped graphene nanoscrolls by adsorption of magnetic γ-Fe2O3 nanoparticles.

Graphene nanoscrolls are Archimedean-type spirals formed by rolling single-layer graphene sheets. Their unique structure makes them conceptually interesting and understanding their formation gives important information on the manipulation and characteristics of various carbon nanostructures. Here we report a 100% efficient process to transform nitrogen-doped reduced graphene oxide sheets into homogeneous nanoscrolls by decoration with magnetic γ-Fe2O3 nanoparticles. Through a large number of control experiments, magnetic characterization of the decorated nanoparticles, and ab initio calculations, we conclude that the rolling is initiated by the strong adsorption of maghemite nanoparticles at nitrogen defects in the graphene lattice and their mutual magnetic interaction. The nanoscroll formation is fully reversible and upon removal of the maghemite nanoparticles, the nanoscrolls return to open sheets. Besides supplying information on the rolling mechanism of graphene nanoscrolls, our results also provide important information on the stabilization of iron oxide nanoparticles.

On the fabrication of crystalline C60 nanorod transistors from solution.

Flexible and high-aspect-ratio C(60) nanorods are synthesized using a liquid-liquid interfacial precipitation process. As-grown nanorods are shown to exhibit a hexagonal close-packed single-crystal structure, with m-dichlorobenzene solvent molecules incorporated into the crystalline structure in a C(60):m-dichlorobenzene ratio of 3:2. An annealing step at 200 °C transforms the nanorods into a solvent-free face-centred-cubic polycrystalline structure. The nanorods are deposited onto field-effect transistor structures using two solvent-based techniques: drop-casting and dip-coating. We find that dip-coating deposition results in a preferred alignment of non-bundled nanorods and a satisfying transistor performance. The latter is quantified by the attainment of an electron mobility of 0.08 cm (2) V(-1) s(-1) and an on/off ratio of > 10(4) for a single-crystal nanorod transistor, fabricated with a solution-based and low-temperature process that is compatible with flexible substrates.

Water assisted growth of C60 rods and tubes by liquid-liquid interfacial precipitation method.

C60 nanorods with hexagonal cross sections are grown using a static liquid-liquid interfacial precipitation method in a system of C60/m-dichlorobenzene solution and ethanol. Adding water to the ethanol phase leads instead to C60 tubes where both length and diameter of the C60 tubes can be controlled by the water content in the ethanol. Based on our observations we find that the diameter of the rods/tubes strongly depends on the nucleation step. We propose a liquid-liquid interface growth model of C60 rods and tubes based on the diffusion rate of the good C60 containing solvent into the poor solvent as well as on the size of the crystal seeds formed at the interface between the two solvents. The grown rods and tubes exhibit a hexagonal solvate crystal structure with m-dichlorobenzene solvent molecules incorporated into the crystal structure, independent of the water content. An annealing step at 200 °C at a pressure < 1 kPa transforms the grown structures into a solvent-free face centered cubic structure. Both the hexagonal and the face centered cubic structures are very stable and neither morphology nor structure shows any signs of degradation after three months of storage.

Simple Dip-Coating Process for the Synthesis of Small Diameter Single-Walled Carbon Nanotubes-Effect of Catalyst Composition and Catalyst Particle Size on Chirality and Diameter.

We report on a dip-coating method to prepare catalyst particles (mixture of iron and cobalt) with a controlled diameter distribution on silicon wafer substrates by changing the solution's concentration and withdrawal velocity. The size and distribution of the prepared catalyst particles were analyzed by atomic force microscopy. Carbon nanotubes were grown by chemical vapor deposition on the substrates with the prepared catalyst particles. By decreasing the catalyst particle size to below 10 nm, the growth of carbon nanotubes can be tuned from few-walled carbon nanotubes, with homogeneous diameter, to highly pure single-walled carbon nanotubes. Analysis of the Raman radial breathing modes, using three different Raman excitation wavelengths (488, 633, and 785 nm), showed a relatively broad diameter distribution (0.8-1.4 nm) of single-walled carbon nanotubes with different chiralities. However, by changing the composition of the catalyst particles while maintaining the growth parameters, the chiralities of single-walled carbon nanotubes were reduced to mainly four different types, (12, 1), (12, 0), (8, 5), and (7, 5), accounting for about 70% of all nanotubes.

Arthroscopically-assisted vs. open surgery in repairing anterior cruciate ligament avulsion.

The management of an Anterior Cruciate Ligament (ACL) avulsion is principally by surgery. There are two major techniques in this regard; fixation through open surgery (arthrotomy) or arthroscopically-assisted repair. These are not new in the literature; however, the debate regarding the better approach is still under debate. This study focused on comparing outcome and consequences of arthroscopically-assisted vs. open surgery in repairing ACL avulsion. In a randomized clinical trial, 44 patients with unilateral ACL avulsion were recruited in Tabriz Shohada teaching Centre during a 12 month period of time. These patients were randomized in two equal age and sex-matched groups underwent either arthroscopically-assisted or open ACL repair. The constructive technique was the same in both groups without using any graft. The minimum follow-up period was 6 months including 3 weeks, 3 months and 6 months postoperatively. Range of Motion (ROM), laxity, Anterior Drawer Test (ADT) result, duration of hospital stay, wound status, nonunion and return to previous work were compared between the two groups. Mean time of suture removal (p = 0.10), minimum and maximum ROM at months 3 (p = 0.43 and 0.22, respectively) and 6 (p = 0.73 and 0.77, respectively), ADT at months 3 and 6 (p = 0.16 for both), laxity at month 6 (p = 0.28) and wound status at week 3 (p = 0.35) were not significantly different between the two groups. There was no case of nonunion at month 6 in either group. The mean hospital stay was significantly shorter in the arthroscopy group (3.77 +/- 0.92 vs. 2.50 +/- 0.51 days; p < 0.001). The mean laxity score was significantly higher in the open surgery group at month 3 (4.82 +/- 0.59 vs. 4.45 +/- 0.60; p = 0.05). The rate of nonunion was significantly higher in the open surgery group at month 3 (40.9% vs. 9.1%; p = 0.02). Patients in the arthroscopically-assisted technique group returned sooner to previous work (17.41 +/- 1.53 vs. 14.82 +/- 0.96 weeks; p < 0.001). Based on our results, arthroscopically-assisted reconstruction of ACL avulsion is superior to open surgery.